DNSIND Working Group Paul Vixie INTERNET-DRAFT ISC January, 1999 Extension mechanisms for DNS (EDNS0) Status of this Memo This document is an Internet-Draft. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as ``work in progress.'' To view the entire list of current Internet-Drafts, please check the "1id-abstracts.txt" listing contained in the Internet-Drafts Shadow Directories on ftp.is.co.za (Africa), ftp.nordu.net (Northern Europe), ftp.nis.garr.it (Southern Europe), munnari.oz.au (Pacific Rim), ftp.ietf.org (US East Coast), or ftp.isi.edu (US West Coast). Abstract The Domain Name System's wire protocol includes a number of fixed fields whose range has been or soon will be exhausted and does not allow clients to advertise their capabilities to servers. This document describes backward compatible mechanisms for allowing the protocol to grow. 1 - Rationale and Scope 1.1. DNS (see [RFC1035]) specifies a Message Format and within such messages there are standard formats for encoding options, errors, and name compression. The maximum allowable size of a DNS Message is fixed. Many of DNS's protocol limits are too small for uses which are or which are desired to become common. There is no way for implementations to advertise their capabilities. Expires July 1999 [Page 1] INTERNET-DRAFT EDNS0 January 1999 1.2. Existing clients will not know how to interpret the protocol extensions detailed here. In practice, these clients will be upgraded when they have need of a new feature, and only new features will make use of the extensions. We must however take account of client behaviour in the face of extra fields, and design a fallback scheme for interoperability with these clients. 2 - Affected Protocol Elements 2.1. The DNS Message Header's (see [RFC1035 4.1.1]) second full 16-bit word is divided into a 4-bit OPCODE, a 4-bit RCODE, and a number of 1-bit flags. The original reserved Z bits have been allocated to various purposes, and most of the RCODE values are now in use. More flags and more possible RCODEs are needed. 2.2. The first two bits of a wire format domain label are used to denote the type of the label. [RFC1035 4.1.4] allocates two of the four possible types and reserves the other two. Proposals for use of the remaining types far outnumber those available. More label types are needed. 2.3. DNS Messages are limited to 512 octets in size when sent over UDP. While the minimum maximum reassembly buffer size still allows a limit of 512 octets of UDP payload, most of the hosts now connected to the Internet are able to reassemble larger datagrams. Some mechanism must be created to allow requestors to advertise larger buffer sizes to responders. 3 - Extended Label Types 3.1. The ``0 1'' label type will now indicate an extended label type, whose value is encoded in the lower six bits of the first octet of a label. All subsequently developed label types should be encoded using an extended label type. 3.2. The ``1 1 1 1 1 1'' extended label type will be reserved for future expansion of the extended label type code space. 4 - OPT pseudo-RR 4.1. The OPT pseudo-RR can be added to the additional data section of either a request or a response. An OPT is called a pseudo-RR because it pertains to a particular transport level message and not to any actual DNS data. OPT RRs shall never be cached, forwarded, or stored in or loaded from master files. Expires July 1999 [Page 2] INTERNET-DRAFT EDNS0 January 1999 4.2. An OPT RR has a fixed part and a variable set of options expressed as {attribute, value} pairs. The fixed part holds some DNS meta data and also a small collection of new protocol elements which we expect to be so popular that it would be a waste of wire space to encode them as {attribute, value} pairs. 4.3. The fixed part of an OPT RR is structured as follows: Field Name Field Type Description ------------------------------------------------------ NAME domain name empty (root domain) TYPE u_int16_t OPT CLASS u_int16_t sender's UDP payload size TTL u_int32_t extended RCODE and flags RDLEN u_int16_t describes RDATA RDATA octet stream {attribute,value} pairs 4.4. The variable part of an OPT RR is encoded in its RDATA and is structured as zero or more of the following: +0 (MSB) +1 (LSB) +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ 0: | OPTION-CODE | +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ 2: | OPTION-LENGTH | +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ 4: | | / OPTION-DATA / / / +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ OPTION-CODE (Assigned by IANA.) OPTION-LENGTH Size (in octets) of OPTION-DATA. OPTION-DATA Varies per OPTION-CODE. 4.5. The sender's UDP buffer size (which OPT stores in the RR CLASS field) is the number of octets of the largest UDP payload that can be reassembled and delivered in the sender's network stack. Note that path MTU, with or without fragmentation, may be smaller than this. Expires July 1999 [Page 3] INTERNET-DRAFT EDNS0 January 1999 4.5.1. Note that a 512-octet UDP payload requires a 576-octet IP reassembly buffer. Choosing 1280 on an Ethernet connected requestor would be reasonable. The consequence of choosing too large a value may be an ICMP message from an intermediate gateway, or even a silent drop of the response message. Requestors are advised to retry in such cases. 4.5.2. Both requestors and responders are advised to take account of the path's already discovered MTU (if known) when considering message sizes. 4.6. The extended RCODE and flags (which OPT stores in the RR TTL field) are structured as follows: +0 (MSB) +1 (LSB) +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ 0: | EXTENDED-RCODE | VERSION | +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ 2: | Z | +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ EXTENDED-RCODE Forms upper 8 bits of extended 12-bit RCODE. Note that EXTENDED-RCODE value "0" indicates that an unextended RCODE is in use (values "0" through "15"). VERSION Indicates the implementation level of whoever sets it. Full conformance with this specification is indicated by version ``0.'' Note that both requestors and responders should set this to the highest level they implement, that responders should send back RCODE=BADVERS and that requestors should be prepared to probe using lower version numbers if they receive an RCODE=BADVERS. Z Set to zero by senders and ignored by receivers, unless modified in a subsequent specification. 5 - Transport Considerations 5.1. The presence of an OPT pseudo-RR in a request should be taken as an indication that the requestor fully implements the given version of EDNS, and can correctly understand any response that conforms to that feature's specification. 5.2. Lack of use of these features in a request must be taken as an indication that the requestor does not implement any part of this specification and that the responder may make no use of any protocol Expires July 1999 [Page 4] INTERNET-DRAFT EDNS0 January 1999 extension described here in its response. 5.3. Responders who do not understand these protocol extensions are expected to send a response with RCODE NOTIMPL, FORMERR, or SERVFAIL. Therefore use of extensions should be ``probed'' such that a responder who isn't known to support them be allowed a retry with no extensions if it responds with such an RCODE. If a responder's capability level is cached by a requestor, a new probe should be sent periodically to test for changes to responder capability. 6 - Security Considerations Requestor-side specification of the maximum buffer size may open a new DNS denial of service attack if responders can be made to send messages which are too large for intermediate gateways to forward, thus leading to potential ICMP storms between gateways and responders. 7 - IANA Considerations IANA is hereby requested to assign an RR type code for OPT. It is the recommendation of this document and its working group that IANA create a registry for EDNS Extended Label Types, for EDNS Option Codes, and for EDNS Version Numbers. This document assigns label type 0b01xxxxxx as "EDNS Extended Label Type." We request that IANA record this assignment. This document assigns extended label type 0bxx111111 as "Reserved for future extended label types." We request that IANA record this assignment. This document assigns option code 65535 to "Reserved for future expansion." This document expands the RCODE space from 4 bits to 12 bits. This will allow IANA to assign more than the 16 distinct RCODE values allowed in [RFC1035]. This document assigns EDNS Extended RCODE "16" to "BADVERS". IESG approval should be required to create new entries in the EDNS Extended Label Type or EDNS Version Number registries, while any published RFC (including Informational, Experimental, or BCP) should be grounds for allocation of an EDNS Option Code. Expires July 1999 [Page 5] INTERNET-DRAFT EDNS0 January 1999 8 - Acknowledgements Paul Mockapetris, Mark Andrews, Robert Elz, Don Lewis, Bob Halley, Donald Eastlake, Rob Austein, Matt Crawford, Randy Bush, and Thomas Narten were each instrumental in creating and refining this specification. 9 - References [RFC1035] P. Mockapetris, ``Domain Names - Implementation and Specification,'' RFC 1035, USC/Information Sciences Institute, November 1987. 10 - Author's Address Paul Vixie Internet Software Consortium 950 Charter Street Redwood City, CA 94063 +1 650 779 7001 Expires July 1999 [Page 6]