HTTP/1.1 200 OK Date: Tue, 09 Apr 2002 07:30:09 GMT Server: Apache/1.3.20 (Unix) Last-Modified: Wed, 28 May 1997 10:32:00 GMT ETag: "305031-1ba81-338c09a0" Accept-Ranges: bytes Content-Length: 113281 Connection: close Content-Type: text/plain Internet Draft RSVP MIB June 1997 RSVP Management Information Base draft-ietf-rsvp-mib-07.txt Tue May 27 11:24:30 PDT 1997 Fred Baker Cisco Systems 519 Lado Drive Santa Barbara, California 93111 fred@cisco.com John Krawczyk ArrowPoint Communications 235 Littleton Road Westford, Massachusetts 01886 jjk@tiac.net 1. Status of this Memo This document is an Internet Draft. Internet Drafts are working documents of the Internet Engineering Task Force (IETF), its Areas, and its Working Groups. Note that other groups may also distribute working documents as Internet Drafts. Internet Drafts are draft documents valid for a maximum of six months. Internet Drafts may be updated, replaced, or obsoleted by other documents at any time. It is not appropriate to use Internet Drafts as reference material or to cite them other than as a "working draft" or "work in progress." Please check the I-D abstract listing contained in each Internet Draft directory to learn the current status of this or any other Internet Draft. Baker and Krawczyk Expires December 1997 [Page 1] Internet Draft RSVP MIB June 1997 2. Abstract This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP- based internets. In particular, it defines objects for managing the Resource Reservation Protocol (RSVP) within the interface attributes defined in the Integrated Services Model. Thus, the Integrated Services MIB is directly relevant to and cross-referenced by this MIB. Comments should be made to the RSVP Working Group, rsvp@isi.edu. This memo does not, in its draft form, specify a standard for the Internet community. Baker and Krawczyk Expires December 1997 [Page 2] Internet Draft RSVP MIB June 1997 3. The SNMPv2 Network Management Framework The SNMPv2 Network Management Framework consists of four major components. They are: o RFC 1441 which defines the SMI, the mechanisms used for describing and naming objects for the purpose of management. o RFC 1213 defines MIB-II, the core set of managed objects for the Internet suite of protocols. o RFC 1445 which defines the administrative and other architectural aspects of the framework. o RFC 1448 which defines the protocol used for network access to managed objects. The Framework permits new objects to be defined for the purpose of experimentation and evaluation. 3.1. Object Definitions Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the subset of Abstract Syntax Notation One (ASN.1) defined in the SMI. In particular, each object type is named by an OBJECT IDENTIFIER, an administratively assigned name. The object type together with an object instance serves to uniquely identify a specific instantiation of the object. For human convenience, we often use a textual string, termed the descriptor, to refer to the object type. 4. Overview 4.1. Textual Conventions Several new data types are introduced as a textual convention in this MIB document. These textual conventions enhance the readability of the specification and can ease comparison with other specifications if appropriate. It should be noted that the introduction of the these textual conventions has no effect on either the syntax nor the semantics of any managed Baker and Krawczyk Expires December 1997 [Page 3] Internet Draft RSVP MIB June 1997 objects. The use of these is merely an artifact of the explanatory method used. Objects defined in terms of one of these methods are always encoded by means of the rules that define the primitive type. Hence, no changes to the SMI or the SNMP are necessary to accommodate these textual conventions which are adopted merely for the convenience of readers and writers in pursuit of the elusive goal of clear, concise, and unambiguous MIB documents. 4.2. Structure of MIB The MIB is composed of the following sections: General Objects Session Statistics Table Session Sender Table Reservation Requests Received Table Reservation Requests Forwarded Table RSVP Interface Attributes Table RSVP Neighbor Table As a general rule, it is difficult in SNMP to describe arbitrarily long of complex messages; this MIB therefore seeks to describe the Path State Database and the Reservation State Database as though each flow and filter description received in an aggregate message had been received in a separate reservation message. Thus, if a RESV message is received for session 224.1.2.3+UDP+4455 with two filter/flow spec groups describing a sender 1.2.3.4 and another sender 1.2.7.8, these two will show in the MIB as two separate rows: one for 224.1.2.3+UDP+4455 from 1.2.3.4 and the other for 224.1.2.3+UDP+4455 from 1.2.7.8. 4.3. Semantics of Writing the Path and Reservation State Databases The path and reservation state tables are writeable. Writing into the Path and Reservation State databases allows one to perform RSVP reservations without authenticating through RSVP mechanisms, but rather through SNMP mechanisms. State created in this way by SNMP does not time out and cannot be deleted by receiving an RSVP teardown message; it can only be deleted by SNMP. Deletion is accomplished by writing 'destroy' to the associated Row Status object, and this will initiate a Baker and Krawczyk Expires December 1997 [Page 4] Internet Draft RSVP MIB June 1997 teardown message as if the state had timed out. 4.4. Intended use of Flow Notifications 4.4.1. The lostFlow Notification The Lost Flow notification is an asychronous event that signifies that a flow is no longer being observed. 4.4.2. The newFlow Notification The newFlow Notification defined in this MIB can be used to advise a network management system of the state of a flow. Baker and Krawczyk Expires December 1997 [Page 5] Internet Draft RSVP MIB June 1997 5. Definitions RSVP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Gauge32, NOTIFICATION-TYPE, Integer32, experimental FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, RowStatus, TimeStamp, TestAndIncr, TimeInterval FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF Port, SessionNumber, SessionType, Protocol, QosService, intSrvFlowStatus, MessageSize, BitRate, BurstSize FROM INTEGRATED-SERVICES-MIB ifIndex, InterfaceIndex FROM IF-MIB; rsvp MODULE-IDENTITY LAST-UPDATED "9511030500Z" -- Tue May 27 11:24:30 PDT 1997 ORGANIZATION "IETF RSVP Working Group" CONTACT-INFO " Fred Baker Postal: Cisco Systems 519 Lado Drive Santa Barbara, California 93111 Tel: +1 805 681 0115 E-Mail: fred@cisco.com John Krawczyk Postal: ArrowPoint Communications 235 Littleton Road Westford, Massachusetts 01886 Tel: +1 508 692 5875 E-Mail: jjk@tiac.net" DESCRIPTION "The MIB module to describe the RSVP Protocol" ::= { experimental 71 } rsvpObjects OBJECT IDENTIFIER ::= { rsvp 1 } -- tables rsvpGenObjects OBJECT IDENTIFIER ::= { rsvp 2 } -- global objects rsvpNotifications OBJECT IDENTIFIER ::= { rsvp 3 } -- traps rsvpConformance OBJECT IDENTIFIER ::= { rsvp 4 } -- conformance Baker and Krawczyk Expires December 1997 [Page 6] Internet Draft RSVP MIB June 1997 RsvpEncapsulation ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This indicates the encapsulation that an RSVP Neighbor is perceived to be using." SYNTAX INTEGER { ip (1), -- IP Protocol 46 udp (2), -- UDP Encapsulation both (3) -- neighbor is using both encapsulations } RefreshInterval ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The number of milliseconds that are expected to elapse between refreshes of path or reserva- tion state. Unrefreshed Path or reservation state is removed after a small multiple of this period." SYNTAX INTEGER (0..'7FFFFFFF'h) Baker and Krawczyk Expires December 1997 [Page 7] Internet Draft RSVP MIB June 1997 -- The RSVP Session Statistics Database displays statistics -- relating to the number of senders and receivers in each -- session. rsvpSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of all sessions seen by a given sys- tem." ::= { rsvpObjects 1 } rsvpSessionEntry OBJECT-TYPE SYNTAX RsvpSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single session seen by a given system." INDEX { rsvpSessionNumber } ::= { rsvpSessionTable 1 } RsvpSessionEntry ::= SEQUENCE { rsvpSessionNumber SessionNumber, rsvpSessionType SessionType, rsvpSessionDestAddr OCTET STRING, rsvpSessionDestAddrLength INTEGER, rsvpSessionProtocol Protocol, rsvpSessionPort Port, rsvpSessionSenders Gauge32, rsvpSessionReceivers Gauge32, rsvpSessionRequests Gauge32, rsvpSessionFlowId INTEGER } Baker and Krawczyk Expires December 1997 [Page 8] Internet Draft RSVP MIB June 1997 rsvpSessionNumber OBJECT-TYPE SYNTAX SessionNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of this session. This is for SNMP Indexing purposes only and has no relation to any protocol value." ::= { rsvpSessionEntry 1 } rsvpSessionType OBJECT-TYPE SYNTAX SessionType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of session (IP4, IP6, IP6 with flow information, etc)." ::= { rsvpSessionEntry 2 } rsvpSessionDestAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address used by all senders in this session. This object may not be changed when the value of the RowStatus object is 'ac- tive'." ::= { rsvpSessionEntry 3 } rsvpSessionDestAddrLength OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The CIDR prefix length of the session address, which is 32 for IP4 host and multicast ad- dresses, and 128 for IP6 addresses. This ob- ject may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpSessionEntry 4 } Baker and Krawczyk Expires December 1997 [Page 9] Internet Draft RSVP MIB June 1997 rsvpSessionProtocol OBJECT-TYPE SYNTAX Protocol MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Protocol used by this session. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpSessionEntry 5 } rsvpSessionPort OBJECT-TYPE SYNTAX Port MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by rsvpSen- derProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpSessionEntry 6 } rsvpSessionSenders OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of distinct senders currently known to be part of this session." ::= { rsvpSessionEntry 7 } Baker and Krawczyk Expires December 1997 [Page 10] Internet Draft RSVP MIB June 1997 rsvpSessionReceivers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reservations being requested of this system for this session." ::= { rsvpSessionEntry 8 } rsvpSessionRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reservation requests this system is sending upstream for this session." ::= { rsvpSessionEntry 9 } rsvpSessionFlowId OBJECT-TYPE SYNTAX INTEGER(0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The flow ID for this session, if this is an IPv6 session." ::= { rsvpSessionEntry 10 } rsvpBadPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object keeps a count of the number of bad RSVP packets received." ::= { rsvpGenObjects 1 } Baker and Krawczyk Expires December 1997 [Page 11] Internet Draft RSVP MIB June 1997 -- The RSVP Session Sender Database contains the information -- displayed by senders regarding their potential contribution -- to session data content. It is in essence a list of the -- valid PATH messages that the RSVP Router or Host is receiving. rsvpSenderNewIndex OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to assign values to rsvpSenderNumber as described in 'Textual Con- ventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET that creates a new instance of rsvpSenderEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated; If the SET succeeds, then the ob- ject is incremented, and the new instance is created according to the manager's directions." ::= { rsvpGenObjects 2 } rsvpSenderTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpSenderEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the state information displayed by senders in PATH messages." ::= { rsvpObjects 2 } rsvpSenderEntry OBJECT-TYPE SYNTAX RsvpSenderEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the state information displayed by a single sender's PATH message." INDEX { rsvpSessionNumber, rsvpSenderNumber } ::= { rsvpSenderTable 1 } RsvpSenderEntry ::= Baker and Krawczyk Expires December 1997 [Page 12] Internet Draft RSVP MIB June 1997 SEQUENCE { rsvpSenderNumber SessionNumber, rsvpSenderType SessionType, rsvpSenderDestAddr OCTET STRING, rsvpSenderAddr OCTET STRING, rsvpSenderDestAddrLength INTEGER, rsvpSenderAddrLength INTEGER, rsvpSenderProtocol Protocol, rsvpSenderDestPort Port, rsvpSenderPort Port, rsvpSenderHopAddr OCTET STRING, rsvpSenderHopLih Integer32, rsvpSenderInterface InterfaceIndex, rsvpSenderTSpecRate BitRate, rsvpSenderTSpecPeakRate BitRate, rsvpSenderTSpecBurst BurstSize, rsvpSenderTSpecMinTU MessageSize, rsvpSenderTSpecMaxTU MessageSize, rsvpSenderInterval RefreshInterval, rsvpSenderRSVPHop TruthValue, rsvpSenderLastChange TimeStamp, rsvpSenderPolicy OCTET STRING, rsvpSenderAdspecBreak TruthValue, rsvpSenderAdspecHopCount INTEGER, rsvpSenderAdspecPathBw BitRate, rsvpSenderAdspecMinLatency Integer32, rsvpSenderAdspecMtu INTEGER, rsvpSenderAdspecGuaranteedSvc TruthValue, rsvpSenderAdspecGuaranteedBreak TruthValue, rsvpSenderAdspecGuaranteedCtot Integer32, rsvpSenderAdspecGuaranteedDtot Integer32, rsvpSenderAdspecGuaranteedCsum Integer32, rsvpSenderAdspecGuaranteedDsum Integer32, rsvpSenderAdspecGuaranteedHopCount INTEGER, rsvpSenderAdspecGuaranteedPathBw BitRate, rsvpSenderAdspecGuaranteedMinLatency Integer32, rsvpSenderAdspecGuaranteedMtu INTEGER, rsvpSenderAdspecCtrlLoadSvc TruthValue, rsvpSenderAdspecCtrlLoadBreak TruthValue, rsvpSenderAdspecCtrlLoadHopCount INTEGER, rsvpSenderAdspecCtrlLoadPathBw BitRate, rsvpSenderAdspecCtrlLoadMinLatency Integer32, rsvpSenderAdspecCtrlLoadMtu INTEGER, rsvpSenderStatus RowStatus, rsvpSenderTTL INTEGER Baker and Krawczyk Expires December 1997 [Page 13] Internet Draft RSVP MIB June 1997 } rsvpSenderNumber OBJECT-TYPE SYNTAX SessionNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of this sender. This is for SNMP Indexing purposes only and has no relation to any protocol value." ::= { rsvpSenderEntry 1 } rsvpSenderType OBJECT-TYPE SYNTAX SessionType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of session (IP4, IP6, IP6 with flow information, etc)." ::= { rsvpSenderEntry 2 } rsvpSenderDestAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The destination address used by all senders in this session. This object may not be changed when the value of the RowStatus object is 'ac- tive'." ::= { rsvpSenderEntry 3 } rsvpSenderAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The source address used by this sender in this session. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpSenderEntry 4 } Baker and Krawczyk Expires December 1997 [Page 14] Internet Draft RSVP MIB June 1997 rsvpSenderDestAddrLength OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpSenderEntry 5 } rsvpSenderAddrLength OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpSenderEntry 6 } rsvpSenderProtocol OBJECT-TYPE SYNTAX Protocol MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Protocol used by this session. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpSenderEntry 7 } Baker and Krawczyk Expires December 1997 [Page 15] Internet Draft RSVP MIB June 1997 rsvpSenderDestPort OBJECT-TYPE SYNTAX Port MAX-ACCESS read-create STATUS current DESCRIPTION "The UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by rsvpSen- derProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpSenderEntry 8 } rsvpSenderPort OBJECT-TYPE SYNTAX Port MAX-ACCESS read-create STATUS current DESCRIPTION "The UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by rsvpSenderPro- tocol is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'ac- tive'." ::= { rsvpSenderEntry 9 } rsvpSenderHopAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The address used by the previous RSVP hop (which may be the original sender)." ::= { rsvpSenderEntry 10 } Baker and Krawczyk Expires December 1997 [Page 16] Internet Draft RSVP MIB June 1997 rsvpSenderHopLih OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Logical Interface Handle used by the pre- vious RSVP hop (which may be the original sender)." ::= { rsvpSenderEntry 11 } rsvpSenderInterface OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex value of the interface on which this PATH message was most recently received." ::= { rsvpSenderEntry 12 } rsvpSenderTSpecRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The Average Bit Rate of the sender's data stream. Within a transmission burst, the ar- rival rate may be as fast as rsvpSenderTSpec- PeakRate (if supported by the service model); however, averaged across two or more burst in- tervals, the rate should not exceed rsvpSen- derTSpecRate. Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower." ::= { rsvpSenderEntry 13 } Baker and Krawczyk Expires December 1997 [Page 17] Internet Draft RSVP MIB June 1997 rsvpSenderTSpecPeakRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The Peak Bit Rate of the sender's data stream. Traffic arrival is not expected to exceed this rate at any time, apart from the effects of jitter in the network. If not specified in the TSpec, this returns zero or noSuchValue." ::= { rsvpSenderEntry 14 } rsvpSenderTSpecBurst OBJECT-TYPE SYNTAX BurstSize UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The size of the largest burst expected from the sender at a time." ::= { rsvpSenderEntry 15 } rsvpSenderTSpecMinTU OBJECT-TYPE SYNTAX MessageSize MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size." ::= { rsvpSenderEntry 16 } Baker and Krawczyk Expires December 1997 [Page 18] Internet Draft RSVP MIB June 1997 rsvpSenderTSpecMaxTU OBJECT-TYPE SYNTAX MessageSize MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus the interface headers, exceed the interface MTU." ::= { rsvpSenderEntry 17 } rsvpSenderInterval OBJECT-TYPE SYNTAX RefreshInterval MAX-ACCESS read-create STATUS current DESCRIPTION "The interval between refresh messages as ad- vertised by the Previous Hop." ::= { rsvpSenderEntry 18 } rsvpSenderRSVPHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If TRUE, the node believes that the previous IP hop is an RSVP hop. If FALSE, the node be- lieves that the previous IP hop may not be an RSVP hop." ::= { rsvpSenderEntry 19 } rsvpSenderLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time of the last change in this PATH mes- sage; This is either the first time it was re- ceived or the time of the most recent change in parameters." ::= { rsvpSenderEntry 20 } Baker and Krawczyk Expires December 1997 [Page 19] Internet Draft RSVP MIB June 1997 rsvpSenderPolicy OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..65536)) MAX-ACCESS read-create STATUS current DESCRIPTION "The contents of the policy object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length." ::= { rsvpSenderEntry 21 } rsvpSenderAdspecBreak OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The global break bit general characterization parameter from the ADSPEC. If TRUE, at least one non-IS hop was detected in the path. If FALSE, no non-IS hops were detected." ::= { rsvpSenderEntry 22 } rsvpSenderAdspecHopCount OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The hop count general characterization parame- ter from the ADSPEC. A return of zero or noSuchValue indicates one of the following con- ditions: the invalid bit was set the parameter was not present" ::= { rsvpSenderEntry 23 } Baker and Krawczyk Expires December 1997 [Page 20] Internet Draft RSVP MIB June 1997 rsvpSenderAdspecPathBw OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The path bandwidth estimate general character- ization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the fol- lowing conditions: the invalid bit was set the parameter was not present" ::= { rsvpSenderEntry 24 } rsvpSenderAdspecMinLatency OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum path latency general characteriza- tion parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the fol- lowing conditions: the invalid bit was set the parameter was not present" ::= { rsvpSenderEntry 25 } Baker and Krawczyk Expires December 1997 [Page 21] Internet Draft RSVP MIB June 1997 rsvpSenderAdspecMtu OBJECT-TYPE SYNTAX INTEGER (0..65535) UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The composed Maximum Transmission Unit general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present" ::= { rsvpSenderEntry 26 } rsvpSenderAdspecGuaranteedSvc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If TRUE, the ADSPEC contains a Guaranteed Ser- vice fragment. If FALSE, the ADSPEC does not contain a Guaranteed Service fragment." ::= { rsvpSenderEntry 27 } rsvpSenderAdspecGuaranteedBreak OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If TRUE, the Guaranteed Service fragment has its 'break' bit set, indicating that one or more nodes along the path do not support the guaranteed service. If FALSE, and rsvpSen- derAdspecGuaranteedSvc is TRUE, the 'break' bit is not set. If rsvpSenderAdspecGuaranteedSvc is FALSE, this returns FALSE or noSuchValue." ::= { rsvpSenderEntry 28 } Baker and Krawczyk Expires December 1997 [Page 22] Internet Draft RSVP MIB June 1997 rsvpSenderAdspecGuaranteedCtot OBJECT-TYPE SYNTAX Integer32 UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "If rsvpSenderAdspecGuaranteedSvc is TRUE, this is the end-to-end composed value for the guaranteed service 'C' parameter. A return of zero or noSuchValue indicates one of the fol- lowing conditions: the invalid bit was set the parameter was not present If rsvpSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue." ::= { rsvpSenderEntry 29 } rsvpSenderAdspecGuaranteedDtot OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If rsvpSenderAdspecGuaranteedSvc is TRUE, this is the end-to-end composed value for the guaranteed service 'D' parameter. A return of zero or noSuchValue indicates one of the fol- lowing conditions: the invalid bit was set the parameter was not present If rsvpSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue." ::= { rsvpSenderEntry 30 } Baker and Krawczyk Expires December 1997 [Page 23] Internet Draft RSVP MIB June 1997 rsvpSenderAdspecGuaranteedCsum OBJECT-TYPE SYNTAX Integer32 UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "If rsvpSenderAdspecGuaranteedSvc is TRUE, this is the composed value for the guaranteed ser- vice 'C' parameter since the last reshaping point. A return of zero or noSuchValue indi- cates one of the following conditions: the invalid bit was set the parameter was not present If rsvpSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue." ::= { rsvpSenderEntry 31 } rsvpSenderAdspecGuaranteedDsum OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If rsvpSenderAdspecGuaranteedSvc is TRUE, this is the composed value for the guaranteed ser- vice 'D' parameter since the last reshaping point. A return of zero or noSuchValue indi- cates one of the following conditions: the invalid bit was set the parameter was not present If rsvpSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue." ::= { rsvpSenderEntry 32 } Baker and Krawczyk Expires December 1997 [Page 24] Internet Draft RSVP MIB June 1997 rsvpSenderAdspecGuaranteedHopCount OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "If rsvpSenderAdspecGuaranteedSvc is TRUE, this is the service-specific override of the hop count general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present If rsvpSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue." ::= { rsvpSenderEntry 33 } rsvpSenderAdspecGuaranteedPathBw OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "If rsvpSenderAdspecGuaranteedSvc is TRUE, this is the service-specific override of the path bandwidth estimate general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following con- ditions: the invalid bit was set the parameter was not present If rsvpSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue." ::= { rsvpSenderEntry 34 } Baker and Krawczyk Expires December 1997 [Page 25] Internet Draft RSVP MIB June 1997 rsvpSenderAdspecGuaranteedMinLatency OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If rsvpSenderAdspecGuaranteedSvc is TRUE, this is the service-specific override of the minimum path latency general characterization parameter from the ADSPEC. A return of zero or noSuch- Value indicates one of the following condi- tions: the invalid bit was set the parameter was not present If rsvpSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue." ::= { rsvpSenderEntry 35 } rsvpSenderAdspecGuaranteedMtu OBJECT-TYPE SYNTAX INTEGER (0..65535) UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "If rsvpSenderAdspecGuaranteedSvc is TRUE, this is the service-specific override of the com- posed Maximum Transmission Unit general charac- terization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present If rsvpSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue." ::= { rsvpSenderEntry 36 } Baker and Krawczyk Expires December 1997 [Page 26] Internet Draft RSVP MIB June 1997 rsvpSenderAdspecCtrlLoadSvc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If TRUE, the ADSPEC contains a Controlled Load Service fragment. If FALSE, the ADSPEC does not contain a Controlled Load Service frag- ment." ::= { rsvpSenderEntry 37 } rsvpSenderAdspecCtrlLoadBreak OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If TRUE, the Controlled Load Service fragment has its 'break' bit set, indicating that one or more nodes along the path do not support the controlled load service. If FALSE, and rsvpSenderAdspecCtrlLoadSvc is TRUE, the 'break' bit is not set. If rsvpSenderAdspecCtrlLoadSvc is FALSE, this returns FALSE or noSuchValue." ::= { rsvpSenderEntry 38 } Baker and Krawczyk Expires December 1997 [Page 27] Internet Draft RSVP MIB June 1997 rsvpSenderAdspecCtrlLoadHopCount OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "If rsvpSenderAdspecCtrlLoadSvc is TRUE, this is the service-specific override of the hop count general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present If rsvpSenderAdspecCtrlLoadSvc is FALSE, this returns zero or noSuchValue." ::= { rsvpSenderEntry 39 } rsvpSenderAdspecCtrlLoadPathBw OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "If rsvpSenderAdspecCtrlLoadSvc is TRUE, this is the service-specific override of the path bandwidth estimate general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following con- ditions: the invalid bit was set the parameter was not present If rsvpSenderAdspecCtrlLoadSvc is FALSE, this returns zero or noSuchValue." ::= { rsvpSenderEntry 40 } Baker and Krawczyk Expires December 1997 [Page 28] Internet Draft RSVP MIB June 1997 rsvpSenderAdspecCtrlLoadMinLatency OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If rsvpSenderAdspecCtrlLoadSvc is TRUE, this is the service-specific override of the minimum path latency general characterization parameter from the ADSPEC. A return of zero or noSuch- Value indicates one of the following condi- tions: the invalid bit was set the parameter was not present If rsvpSenderAdspecCtrlLoadSvc is FALSE, this returns zero or noSuchValue." ::= { rsvpSenderEntry 41 } rsvpSenderAdspecCtrlLoadMtu OBJECT-TYPE SYNTAX INTEGER (0..65535) UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "If rsvpSenderAdspecCtrlLoadSvc is TRUE, this is the service-specific override of the com- posed Maximum Transmission Unit general charac- terization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present If rsvpSenderAdspecCtrlLoadSvc is FALSE, this returns zero or noSuchValue." ::= { rsvpSenderEntry 42 } Baker and Krawczyk Expires December 1997 [Page 29] Internet Draft RSVP MIB June 1997 rsvpSenderStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "'active' for all active PATH messages. This object may be used to install static PATH in- formation or delete PATH information." ::= { rsvpSenderEntry 43 } rsvpSenderTTL OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The TTL value in the RSVP header that was last received." ::= { rsvpSenderEntry 44 } rsvpSenderOutInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpSenderOutInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of outgoing interfaces that PATH messages use. The ifIndex is the ifIndex value of the egress interface." ::= { rsvpObjects 3 } rsvpSenderOutInterfaceEntry OBJECT-TYPE SYNTAX RsvpSenderOutInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of outgoing interfaces that a particular PATH message has." INDEX { rsvpSessionNumber, rsvpSenderNumber, ifIndex } ::= { rsvpSenderOutInterfaceTable 1 } RsvpSenderOutInterfaceEntry ::= SEQUENCE { rsvpSenderOutInterfaceStatus RowStatus Baker and Krawczyk Expires December 1997 [Page 30] Internet Draft RSVP MIB June 1997 } rsvpSenderOutInterfaceStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "'active' for all active PATH messages." ::= { rsvpSenderOutInterfaceEntry 1 } Baker and Krawczyk Expires December 1997 [Page 31] Internet Draft RSVP MIB June 1997 -- The RSVP Reservation Requests Received Table contains the -- information displayed by receivers regarding their needs with -- respect to sessions and senders. It is in essence a list of the -- valid RESV messages that the RSVP Router or Host is receiving. rsvpResvNewIndex OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to assign values to rsvpResvNumber as described in 'Textual Conven- tions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET that creates a new instance of rsvpResvEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated; If the SET succeeds, then the object is incremented, and the new instance is created according to the manager's directions." ::= { rsvpGenObjects 3 } rsvpResvTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpResvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the state information displayed by receivers in RESV messages." ::= { rsvpObjects 4 } rsvpResvEntry OBJECT-TYPE SYNTAX RsvpResvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the state information displayed by a single receiver's RESV message concerning a single sender." INDEX { rsvpSessionNumber, rsvpResvNumber } ::= { rsvpResvTable 1 } Baker and Krawczyk Expires December 1997 [Page 32] Internet Draft RSVP MIB June 1997 RsvpResvEntry ::= SEQUENCE { rsvpResvNumber SessionNumber, rsvpResvType SessionType, rsvpResvDestAddr OCTET STRING, rsvpResvSenderAddr OCTET STRING, rsvpResvDestAddrLength INTEGER, rsvpResvSenderAddrLength INTEGER, rsvpResvProtocol Protocol, rsvpResvDestPort Port, rsvpResvPort Port, rsvpResvHopAddr OCTET STRING, rsvpResvHopLih Integer32, rsvpResvInterface InterfaceIndex, rsvpResvService QosService, rsvpResvTSpecRate BitRate, rsvpResvTSpecPeakRate BitRate, rsvpResvTSpecBurst BurstSize, rsvpResvTSpecMinTU MessageSize, rsvpResvTSpecMaxTU MessageSize, rsvpResvRSpecRate BitRate, rsvpResvRSpecSlack Integer32, rsvpResvInterval RefreshInterval, rsvpResvScope OCTET STRING, rsvpResvShared TruthValue, rsvpResvExplicit TruthValue, rsvpResvRSVPHop TruthValue, rsvpResvLastChange TimeStamp, rsvpResvPolicy OCTET STRING, rsvpResvStatus RowStatus, rsvpResvTTL INTEGER } rsvpResvNumber OBJECT-TYPE SYNTAX SessionNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of this reservation request. This is for SNMP Indexing purposes only and has no relation to any protocol value." ::= { rsvpResvEntry 1 } Baker and Krawczyk Expires December 1997 [Page 33] Internet Draft RSVP MIB June 1997 rsvpResvType OBJECT-TYPE SYNTAX SessionType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of session (IP4, IP6, IP6 with flow information, etc)." ::= { rsvpResvEntry 2 } rsvpResvDestAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The destination address used by all senders in this session. This object may not be changed when the value of the RowStatus object is 'ac- tive'." ::= { rsvpResvEntry 3 } rsvpResvSenderAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The source address of the sender selected by this reservation. The value of all zeroes in- dicates 'all senders'. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpResvEntry 4 } Baker and Krawczyk Expires December 1997 [Page 34] Internet Draft RSVP MIB June 1997 rsvpResvDestAddrLength OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpResvEntry 5 } rsvpResvSenderAddrLength OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpResvEntry 6 } rsvpResvProtocol OBJECT-TYPE SYNTAX Protocol MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Protocol used by this session. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpResvEntry 7 } Baker and Krawczyk Expires December 1997 [Page 35] Internet Draft RSVP MIB June 1997 rsvpResvDestPort OBJECT-TYPE SYNTAX Port MAX-ACCESS read-create STATUS current DESCRIPTION "The UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by rsvpResvProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpResvEntry 8 } rsvpResvPort OBJECT-TYPE SYNTAX Port MAX-ACCESS read-create STATUS current DESCRIPTION "The UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by rsvpResvProto- col is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'ac- tive'." ::= { rsvpResvEntry 9 } rsvpResvHopAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The address used by the next RSVP hop (which may be the ultimate receiver)." ::= { rsvpResvEntry 10 } Baker and Krawczyk Expires December 1997 [Page 36] Internet Draft RSVP MIB June 1997 rsvpResvHopLih OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Logical Interface Handle received from the previous RSVP hop (which may be the ultimate receiver)." ::= { rsvpResvEntry 11 } rsvpResvInterface OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex value of the interface on which this RESV message was most recently received." ::= { rsvpResvEntry 12 } rsvpResvService OBJECT-TYPE SYNTAX QosService MAX-ACCESS read-create STATUS current DESCRIPTION "The QoS Service classification requested by the receiver." ::= { rsvpResvEntry 13 } Baker and Krawczyk Expires December 1997 [Page 37] Internet Draft RSVP MIB June 1997 rsvpResvTSpecRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The Average Bit Rate of the sender's data stream. Within a transmission burst, the ar- rival rate may be as fast as rsvpResvTSpec- PeakRate (if supported by the service model); however, averaged across two or more burst in- tervals, the rate should not exceed rsvpResvTSpecRate. Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower." ::= { rsvpResvEntry 14 } rsvpResvTSpecPeakRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The Peak Bit Rate of the sender's data stream. Traffic arrival is not expected to exceed this rate at any time, apart from the effects of jitter in the network. If not specified in the TSpec, this returns zero or noSuchValue." ::= { rsvpResvEntry 15 } Baker and Krawczyk Expires December 1997 [Page 38] Internet Draft RSVP MIB June 1997 rsvpResvTSpecBurst OBJECT-TYPE SYNTAX BurstSize UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, the receiver is asking the network to provide flow pacing beyond what would be provided under normal circumstances. Such pac- ing is at the network's option." ::= { rsvpResvEntry 16 } rsvpResvTSpecMinTU OBJECT-TYPE SYNTAX MessageSize MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size." ::= { rsvpResvEntry 17 } rsvpResvTSpecMaxTU OBJECT-TYPE SYNTAX MessageSize MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus the interface headers, exceed the interface MTU." ::= { rsvpResvEntry 18 } Baker and Krawczyk Expires December 1997 [Page 39] Internet Draft RSVP MIB June 1997 rsvpResvRSpecRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "If the requested service is Guaranteed, as specified by rsvpResvService, this is the clearing rate that is being requested. Other- wise, it is zero, or the agent may return noSuchValue." ::= { rsvpResvEntry 19 } rsvpResvRSpecSlack OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If the requested service is Guaranteed, as specified by rsvpResvService, this is the delay slack. Otherwise, it is zero, or the agent may return noSuchValue." ::= { rsvpResvEntry 20 } rsvpResvInterval OBJECT-TYPE SYNTAX RefreshInterval MAX-ACCESS read-create STATUS current DESCRIPTION "The interval between refresh messages as ad- vertised by the Next Hop." ::= { rsvpResvEntry 21 } Baker and Krawczyk Expires December 1997 [Page 40] Internet Draft RSVP MIB June 1997 rsvpResvScope OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..65536)) MAX-ACCESS read-create STATUS current DESCRIPTION "The contents of the scope object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length. If the length is non-zero, this contains a series of IP4 or IP6 addresses." ::= { rsvpResvEntry 22 } rsvpResvShared OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If TRUE, a reservation shared among senders is requested. If FALSE, a reservation specific to this sender is requested." ::= { rsvpResvEntry 23 } rsvpResvExplicit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If TRUE, individual senders are listed using Filter Specifications. If FALSE, all senders are implicitly selected. The Scope Object will contain a list of senders that need to receive this reservation request for the purpose of routing the RESV message." ::= { rsvpResvEntry 24 } Baker and Krawczyk Expires December 1997 [Page 41] Internet Draft RSVP MIB June 1997 rsvpResvRSVPHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If TRUE, the node believes that the previous IP hop is an RSVP hop. If FALSE, the node be- lieves that the previous IP hop may not be an RSVP hop." ::= { rsvpResvEntry 25 } rsvpResvLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time of the last change in this reserva- tion request; This is either the first time it was received or the time of the most recent change in parameters." ::= { rsvpResvEntry 26 } rsvpResvPolicy OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..65536)) MAX-ACCESS read-create STATUS current DESCRIPTION "The contents of the policy object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length." ::= { rsvpResvEntry 27 } Baker and Krawczyk Expires December 1997 [Page 42] Internet Draft RSVP MIB June 1997 rsvpResvStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "'active' for all active RESV messages. This object may be used to install static RESV in- formation or delete RESV information." ::= { rsvpResvEntry 28 } rsvpResvTTL OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The TTL value in the RSVP header that was last received." ::= { rsvpResvEntry 29 } Baker and Krawczyk Expires December 1997 [Page 43] Internet Draft RSVP MIB June 1997 -- The RSVP Reservation Requests Forwarded Table contains the -- information displayed by receivers regarding their needs with -- respect to sessions and senders. It is in essence a list of the -- valid RESV messages that the RSVP Router or Host is sending -- to its upstream neighbors. rsvpResvFwdNewIndex OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to assign values to rsvpResvFwdNumber as described in 'Textual Con- ventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET that creates a new instance of rsvpResvFwdEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated; If the SET succeeds, then the ob- ject is incremented, and the new instance is created according to the manager's directions." ::= { rsvpGenObjects 4 } rsvpResvFwdTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpResvFwdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the state information displayed upstream in RESV messages." ::= { rsvpObjects 5 } Baker and Krawczyk Expires December 1997 [Page 44] Internet Draft RSVP MIB June 1997 rsvpResvFwdEntry OBJECT-TYPE SYNTAX RsvpResvFwdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the state information displayed upstream in an RESV message concern- ing a single sender." INDEX { rsvpSessionNumber, rsvpResvFwdNumber } ::= { rsvpResvFwdTable 1 } RsvpResvFwdEntry ::= SEQUENCE { rsvpResvFwdNumber SessionNumber, rsvpResvFwdType SessionType, rsvpResvFwdDestAddr OCTET STRING, rsvpResvFwdSenderAddr OCTET STRING, rsvpResvFwdDestAddrLength INTEGER, rsvpResvFwdSenderAddrLength INTEGER, rsvpResvFwdProtocol Protocol, rsvpResvFwdDestPort Port, rsvpResvFwdPort Port, rsvpResvFwdHopAddr OCTET STRING, rsvpResvFwdHopLih Integer32, rsvpResvFwdInterface InterfaceIndex, rsvpResvFwdService QosService, rsvpResvFwdTSpecRate BitRate, rsvpResvFwdTSpecPeakRate BitRate, rsvpResvFwdTSpecBurst BurstSize, rsvpResvFwdTSpecMinTU MessageSize, rsvpResvFwdTSpecMaxTU MessageSize, rsvpResvFwdRSpecRate BitRate, rsvpResvFwdRSpecSlack Integer32, rsvpResvFwdInterval RefreshInterval, rsvpResvFwdScope OCTET STRING, rsvpResvFwdShared TruthValue, rsvpResvFwdExplicit TruthValue, rsvpResvFwdRSVPHop TruthValue, rsvpResvFwdLastChange TimeStamp, rsvpResvFwdPolicy OCTET STRING, rsvpResvFwdStatus RowStatus, rsvpResvFwdTTL INTEGER } Baker and Krawczyk Expires December 1997 [Page 45] Internet Draft RSVP MIB June 1997 rsvpResvFwdNumber OBJECT-TYPE SYNTAX SessionNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of this reservation request. This is for SNMP Indexing purposes only and has no relation to any protocol value." ::= { rsvpResvFwdEntry 1 } rsvpResvFwdType OBJECT-TYPE SYNTAX SessionType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of session (IP4, IP6, IP6 with flow information, etc)." ::= { rsvpResvFwdEntry 2 } rsvpResvFwdDestAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address used by all senders in this session. This object may not be changed when the value of the RowStatus object is 'ac- tive'." ::= { rsvpResvFwdEntry 3 } rsvpResvFwdSenderAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The source address of the sender selected by this reservation. The value of all zeroes in- dicates 'all senders'. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpResvFwdEntry 4 } Baker and Krawczyk Expires December 1997 [Page 46] Internet Draft RSVP MIB June 1997 rsvpResvFwdDestAddrLength OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpResvFwdEntry 5 } rsvpResvFwdSenderAddrLength OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpResvFwdEntry 6 } rsvpResvFwdProtocol OBJECT-TYPE SYNTAX Protocol MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Protocol used by a session. for secure sessions, this indicates IP Security. This ob- ject may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpResvFwdEntry 7 } Baker and Krawczyk Expires December 1997 [Page 47] Internet Draft RSVP MIB June 1997 rsvpResvFwdDestPort OBJECT-TYPE SYNTAX Port MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by rsvpResvFwdProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpResvFwdEntry 8 } rsvpResvFwdPort OBJECT-TYPE SYNTAX Port MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by rsvpResvFwdProtocol is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpResvFwdEntry 9 } rsvpResvFwdHopAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the (previous) RSVP that will receive this message." ::= { rsvpResvFwdEntry 10 } Baker and Krawczyk Expires December 1997 [Page 48] Internet Draft RSVP MIB June 1997 rsvpResvFwdHopLih OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Logical Interface Handle sent to the (pre- vious) RSVP that will receive this message." ::= { rsvpResvFwdEntry 11 } rsvpResvFwdInterface OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value of the interface on which this RESV message was most recently sent." ::= { rsvpResvFwdEntry 12 } rsvpResvFwdService OBJECT-TYPE SYNTAX QosService MAX-ACCESS read-only STATUS current DESCRIPTION "The QoS Service classification requested." ::= { rsvpResvFwdEntry 13 } Baker and Krawczyk Expires December 1997 [Page 49] Internet Draft RSVP MIB June 1997 rsvpResvFwdTSpecRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The Average Bit Rate of the sender's data stream. Within a transmission burst, the ar- rival rate may be as fast as rsvpResvFwdTSpec- PeakRate (if supported by the service model); however, averaged across two or more burst in- tervals, the rate should not exceed rsvpResvFwdTSpecRate. Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower." ::= { rsvpResvFwdEntry 14 } rsvpResvFwdTSpecPeakRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The Peak Bit Rate of the sender's data stream Traffic arrival is not expected to exceed this rate at any time, apart from the effects of jitter in the network. If not specified in the TSpec, this returns zero or noSuchValue." ::= { rsvpResvFwdEntry 15 } Baker and Krawczyk Expires December 1997 [Page 50] Internet Draft RSVP MIB June 1997 rsvpResvFwdTSpecBurst OBJECT-TYPE SYNTAX BurstSize UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, the receiver is asking the network to provide flow pacing beyond what would be provided under normal circumstances. Such pac- ing is at the network's option." ::= { rsvpResvFwdEntry 16 } rsvpResvFwdTSpecMinTU OBJECT-TYPE SYNTAX MessageSize MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size." ::= { rsvpResvFwdEntry 17 } rsvpResvFwdTSpecMaxTU OBJECT-TYPE SYNTAX MessageSize MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus the interface headers, exceed the interface MTU." ::= { rsvpResvFwdEntry 18 } Baker and Krawczyk Expires December 1997 [Page 51] Internet Draft RSVP MIB June 1997 rsvpResvFwdRSpecRate OBJECT-TYPE SYNTAX BitRate UNITS "bytes per second" MAX-ACCESS read-only STATUS current DESCRIPTION "If the requested service is Guaranteed, as specified by rsvpResvService, this is the clearing rate that is being requested. Other- wise, it is zero, or the agent may return noSuchValue." ::= { rsvpResvFwdEntry 19 } rsvpResvFwdRSpecSlack OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "If the requested service is Guaranteed, as specified by rsvpResvService, this is the delay slack. Otherwise, it is zero, or the agent may return noSuchValue." ::= { rsvpResvFwdEntry 20 } rsvpResvFwdInterval OBJECT-TYPE SYNTAX RefreshInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The interval between refresh messages adver- tised to the Previous Hop." ::= { rsvpResvFwdEntry 21 } Baker and Krawczyk Expires December 1997 [Page 52] Internet Draft RSVP MIB June 1997 rsvpResvFwdScope OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..65536)) MAX-ACCESS read-only STATUS current DESCRIPTION "The contents of the scope object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length." ::= { rsvpResvFwdEntry 22 } rsvpResvFwdShared OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, a reservation shared among senders is requested. If FALSE, a reservation specific to this sender is requested." ::= { rsvpResvFwdEntry 23 } rsvpResvFwdExplicit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, individual senders are listed using Filter Specifications. If FALSE, all senders are implicitly selected. The Scope Object will contain a list of senders that need to receive this reservation request for the purpose of routing the RESV message." ::= { rsvpResvFwdEntry 24 } Baker and Krawczyk Expires December 1997 [Page 53] Internet Draft RSVP MIB June 1997 rsvpResvFwdRSVPHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If TRUE, the node believes that the next IP hop is an RSVP hop. If FALSE, the node be- lieves that the next IP hop may not be an RSVP hop." ::= { rsvpResvFwdEntry 25 } rsvpResvFwdLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time of the last change in this request; This is either the first time it was sent or the time of the most recent change in parame- ters." ::= { rsvpResvFwdEntry 26 } rsvpResvFwdPolicy OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..65536)) MAX-ACCESS read-only STATUS current DESCRIPTION "The contents of the policy object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length." ::= { rsvpResvFwdEntry 27 } rsvpResvFwdStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "'active' for all active RESV messages. This object may be used to delete RESV information." ::= { rsvpResvFwdEntry 28 } Baker and Krawczyk Expires December 1997 [Page 54] Internet Draft RSVP MIB June 1997 rsvpResvFwdTTL OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The TTL value in the RSVP header that was last received." ::= { rsvpResvFwdEntry 29 } Baker and Krawczyk Expires December 1997 [Page 55] Internet Draft RSVP MIB June 1997 -- The RSVP Interface Attributes Database contains the -- RSVP-specific information for an interface. Information -- that is shared with other reservation procedures such -- as ST-II is in the Integrated Interface Attributes -- Database. rsvpIfTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RSVP-specific attributes of the system's interfaces." ::= { rsvpObjects 6 } rsvpIfEntry OBJECT-TYPE SYNTAX RsvpIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RSVP-specific attributes of the a given interface." INDEX { ifIndex } ::= { rsvpIfTable 1 } RsvpIfEntry ::= SEQUENCE { rsvpIfUdpNbrs Gauge32, rsvpIfIpNbrs Gauge32, rsvpIfNbrs Gauge32, rsvpIfEnabled TruthValue, rsvpIfUdpRequired TruthValue, rsvpIfRefreshBlockadeMultiple INTEGER, rsvpIfRefreshMultiple INTEGER, rsvpIfTTL INTEGER, rsvpIfRefreshInterval TimeInterval, rsvpIfRouteDelay TimeInterval, rsvpIfStatus RowStatus } Baker and Krawczyk Expires December 1997 [Page 56] Internet Draft RSVP MIB June 1997 rsvpIfUdpNbrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbors perceived to be using only the RSVP UDP Encapsulation." ::= { rsvpIfEntry 1 } rsvpIfIpNbrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbors perceived to be using only the RSVP IP Encapsulation." ::= { rsvpIfEntry 2 } rsvpIfNbrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbors currently perceived; this will exceed rsvpIfIpNbrs + rsvpIfUdpNbrs by the number of neighbors using both encapsu- lations." ::= { rsvpIfEntry 3 } rsvpIfRefreshBlockadeMultiple OBJECT-TYPE SYNTAX INTEGER (1..65536) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the RSVP value 'Kb', Which is the minimum number of refresh intervals that blockade state will last once entered." DEFVAL { 4 } ::= { rsvpIfEntry 4 } Baker and Krawczyk Expires December 1997 [Page 57] Internet Draft RSVP MIB June 1997 rsvpIfRefreshMultiple OBJECT-TYPE SYNTAX INTEGER (1..65536) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the RSVP value 'K', which is the number of refresh intervals which must elapse (minimum) before a PATH or RESV message which is not being refreshed will be aged out." DEFVAL { 3 } ::= { rsvpIfEntry 5 } rsvpIfTTL OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of SEND_TTL used on this interface for messages this node originates. If set to zero, the node determines the TTL via other means." DEFVAL { 0 } -- which is to say, no override ::= { rsvpIfEntry 6 } rsvpIfRefreshInterval OBJECT-TYPE SYNTAX TimeInterval UNITS "hundredths of a second" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the RSVP value 'R', which is the minimum period between refresh transmissions of a given PATH or RESV message on an interface." DEFVAL { 3000 } -- 30 seconds ::= { rsvpIfEntry 7 } Baker and Krawczyk Expires December 1997 [Page 58] Internet Draft RSVP MIB June 1997 rsvpIfRouteDelay OBJECT-TYPE SYNTAX TimeInterval UNITS "hundredths of a second" MAX-ACCESS read-create STATUS current DESCRIPTION "The approximate period from the time a route is changed to the time a resulting message ap- pears on the interface." DEFVAL { 200 } -- 2 seconds ::= { rsvpIfEntry 8 } rsvpIfEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If TRUE, RSVP is enabled on this Interface. If FALSE, RSVP is not enabled on this inter- face." ::= { rsvpIfEntry 9 } rsvpIfUdpRequired OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If TRUE, manual configuration forces the use of UDP encapsulation on the interface. If FALSE, UDP encapsulation is only used if rsvpI- fUdpNbrs is not zero." ::= { rsvpIfEntry 10 } Baker and Krawczyk Expires December 1997 [Page 59] Internet Draft RSVP MIB June 1997 rsvpIfStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "'active' on interfaces that are configured for RSVP." ::= { rsvpIfEntry 11 } Baker and Krawczyk Expires December 1997 [Page 60] Internet Draft RSVP MIB June 1997 -- The RSVP Neighbor Database lists the neighbors the RSVP -- process currently is receiving messages from. rsvpNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing the Neighbors of an RSVP system." ::= { rsvpObjects 7 } rsvpNbrEntry OBJECT-TYPE SYNTAX RsvpNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information describing a single RSVP Neigh- bor." INDEX { ifIndex, rsvpNbrAddress } ::= { rsvpNbrTable 1 } RsvpNbrEntry ::= SEQUENCE { rsvpNbrAddress OCTET STRING, rsvpNbrProtocol RsvpEncapsulation, rsvpNbrStatus RowStatus } rsvpNbrAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP4 or IP6 Address used by this neighbor. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpNbrEntry 1 } Baker and Krawczyk Expires December 1997 [Page 61] Internet Draft RSVP MIB June 1997 rsvpNbrProtocol OBJECT-TYPE SYNTAX RsvpEncapsulation MAX-ACCESS read-create STATUS current DESCRIPTION "The encapsulation being used by this neigh- bor." ::= { rsvpNbrEntry 2 } rsvpNbrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "'active' for all neighbors. This object may be used to configure neighbors. In the pres- ence of configured neighbors, the implementa- tion may (but is not required to) limit the set of valid neighbors to those configured." ::= { rsvpNbrEntry 3 } Baker and Krawczyk Expires December 1997 [Page 62] Internet Draft RSVP MIB June 1997 -- -- Notifications used to signal events -- newFlow NOTIFICATION-TYPE OBJECTS { intSrvFlowStatus, rsvpSessionDestAddr, rsvpResvFwdStatus, rsvpResvStatus, rsvpSenderStatus } STATUS current DESCRIPTION "The newFlow trap indicates that the originat- ing system has installed a new flow in its classifier, or (when reservation authorization is in view) is prepared to install such a flow in the classifier and is requesting authoriza- tion. The objects included with the Notifica- tion may be used to read further information using the Integrated Services and RSVP MIBs. Authorization or non-authorization may be enacted by a write to the variable intSrvFlowS- tatus." ::= { rsvpNotifications 1 } lostFlow NOTIFICATION-TYPE OBJECTS { intSrvFlowStatus, rsvpSessionDestAddr, rsvpResvFwdStatus, rsvpResvStatus, rsvpSenderStatus } STATUS current DESCRIPTION "The lostFlow trap indicates that the originat- ing system has removed a flow from its classif- ier." ::= { rsvpNotifications 2 } Baker and Krawczyk Expires December 1997 [Page 63] Internet Draft RSVP MIB June 1997 -- conformance information rsvpGroups OBJECT IDENTIFIER ::= { rsvpConformance 1 } rsvpCompliances OBJECT IDENTIFIER ::= { rsvpConformance 2 } -- compliance statements Baker and Krawczyk Expires December 1997 [Page 64] Internet Draft RSVP MIB June 1997 rsvpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement. Note that the im- plementation of this module requires implemen- tation of the Integrated Services MIB as well." MODULE -- this module MANDATORY-GROUPS { rsvpSessionGroup, rsvpSenderGroup, rsvpResvGroup, rsvpIfGroup, rsvpNbrGroup } GROUP rsvpResvFwdGroup DESCRIPTION "The Reservation Requests table is appropriate in implementations that store upstream reserva- tion messages, but not appropriate in implemen- tations which calculate them on each transmis- sion." GROUP rsvpNotificationGroup DESCRIPTION "The notifications in this module may be used to advise a network management station of changes in flow status, and are required when this use is in view." OBJECT rsvpSessionRequests MIN-ACCESS not-accessible DESCRIPTION "This object is optional." OBJECT rsvpSessionFlowId MIN-ACCESS not-accessible DESCRIPTION "This object is needed only in a system that imple- ments IPv6." OBJECT rsvpSenderType MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderDestAddr Baker and Krawczyk Expires December 1997 [Page 65] Internet Draft RSVP MIB June 1997 MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderAddr MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderDestAddrLength MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderAddrLength MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderProtocol MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderDestPort MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderPort MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderHopAddr MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be Baker and Krawczyk Expires December 1997 [Page 66] Internet Draft RSVP MIB June 1997 read-only." OBJECT rsvpSenderHopLih MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderInterface MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderTSpecRate MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderTSpecPeakRate MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderTSpecBurst MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderTSpecMinTU MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderTSpecMaxTU MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderInterval Baker and Krawczyk Expires December 1997 [Page 67] Internet Draft RSVP MIB June 1997 MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderRSVPHop MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderPolicy MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderAdspecBreak MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderAdspecHopCount MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderAdspecPathBw MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderAdspecMinLatency MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpSenderAdspecMtu MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be Baker and Krawczyk Expires December 1997 [Page 68] Internet Draft RSVP MIB June 1997 read-only." OBJECT rsvpSenderAdspecGuaranteedSvc MIN-ACCESS not-accessible DESCRIPTION "This may be not-accessible if the system does not support Guaranteed Service." OBJECT rsvpSenderAdspecGuaranteedBreak MIN-ACCESS not-accessible DESCRIPTION "This may be not-accessible if the system does not support Guaranteed Service." OBJECT rsvpSenderAdspecGuaranteedCtot MIN-ACCESS not-accessible DESCRIPTION "This may be not-accessible if the system does not support Guaranteed Service." OBJECT rsvpSenderAdspecGuaranteedDtot MIN-ACCESS not-accessible DESCRIPTION "This may be not-accessible if the system does not support Guaranteed Service." OBJECT rsvpSenderAdspecGuaranteedCsum MIN-ACCESS not-accessible DESCRIPTION "This may be not-accessible if the system does not support Guaranteed Service." OBJECT rsvpSenderAdspecGuaranteedDsum MIN-ACCESS read-only DESCRIPTION "This may be not-accessible if the system does not support Guaranteed Service." OBJECT rsvpSenderAdspecGuaranteedHopCount MIN-ACCESS not-accessible DESCRIPTION "This may be not-accessible if the system does not support Guaranteed Service." OBJECT rsvpSenderAdspecGuaranteedPathBw Baker and Krawczyk Expires December 1997 [Page 69] Internet Draft RSVP MIB June 1997 MIN-ACCESS not-accessible DESCRIPTION "This may be not-accessible if the system does not support Guaranteed Service." OBJECT rsvpSenderAdspecGuaranteedMinLatency MIN-ACCESS not-accessible DESCRIPTION "This may be not-accessible if the system does not support Guaranteed Service." OBJECT rsvpSenderAdspecGuaranteedMtu MIN-ACCESS not-accessible DESCRIPTION "This may be not-accessible if the system does not support Guaranteed Service." OBJECT rsvpSenderAdspecCtrlLoadSvc MIN-ACCESS not-accessible DESCRIPTION "This may be not-accessible if the system does not support Controlled Load." OBJECT rsvpSenderAdspecCtrlLoadBreak MIN-ACCESS not-accessible DESCRIPTION "This may be not-accessible if the system does not support Controlled Load." OBJECT rsvpSenderAdspecCtrlLoadHopCount MIN-ACCESS not-accessible DESCRIPTION "This may be not-accessible if the system does not support Controlled Load." OBJECT rsvpSenderAdspecCtrlLoadPathBw MIN-ACCESS not-accessible DESCRIPTION "This may be not-accessible if the system does not support Controlled Load." OBJECT rsvpSenderAdspecCtrlLoadMinLatency MIN-ACCESS not-accessible DESCRIPTION "This may be not-accessible if the system does not Baker and Krawczyk Expires December 1997 [Page 70] Internet Draft RSVP MIB June 1997 support Controlled Load." OBJECT rsvpSenderAdspecCtrlLoadMtu MIN-ACCESS not-accessible DESCRIPTION "This may be not-accessible if the system does not support Controlled Load." OBJECT rsvpSenderStatus MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvType MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvDestAddr MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvSenderAddr MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvDestAddrLength MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvSenderAddrLength MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." Baker and Krawczyk Expires December 1997 [Page 71] Internet Draft RSVP MIB June 1997 OBJECT rsvpResvProtocol MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvDestPort MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvPort MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvHopAddr MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvHopLih MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvInterface MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvService MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvTSpecRate MIN-ACCESS read-only DESCRIPTION Baker and Krawczyk Expires December 1997 [Page 72] Internet Draft RSVP MIB June 1997 "read-create access is not required. This may be read-only." OBJECT rsvpResvTSpecPeakRate MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvTSpecBurst MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvTSpecMinTU MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvTSpecMaxTU MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvRSpecRate MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvRSpecSlack MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvInterval MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." Baker and Krawczyk Expires December 1997 [Page 73] Internet Draft RSVP MIB June 1997 OBJECT rsvpResvScope MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvShared MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvExplicit MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvRSVPHop MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvPolicy MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvStatus MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." OBJECT rsvpResvFwdStatus MIN-ACCESS read-only DESCRIPTION "read-create access is not required. This may be read-only." ::= { rsvpCompliances 1 } Baker and Krawczyk Expires December 1997 [Page 74] Internet Draft RSVP MIB June 1997 rsvpSessionGroup OBJECT-GROUP OBJECTS { rsvpSessionType, rsvpSessionDestAddr, rsvpSessionDestAddrLength, rsvpSessionProtocol, rsvpSessionPort, rsvpSessionSenders, rsvpSessionReceivers, rsvpSessionRequests, rsvpSessionFlowId } STATUS current DESCRIPTION "These objects are required for RSVP Systems." ::= { rsvpGroups 1 } rsvpSenderGroup OBJECT-GROUP OBJECTS { rsvpSenderType, rsvpSenderDestAddr, rsvpSenderAddr, rsvpSenderDestAddrLength, rsvpSenderAddrLength, rsvpSenderProtocol, rsvpSenderDestPort, rsvpSenderPort, rsvpSenderHopAddr, rsvpSenderHopLih, rsvpSenderInterface, rsvpSenderTSpecRate, rsvpSenderTSpecPeakRate, rsvpSenderTSpecBurst, rsvpSenderTSpecMinTU, rsvpSenderTSpecMaxTU, rsvpSenderInterval, rsvpSenderLastChange, rsvpSenderStatus, rsvpSenderRSVPHop, rsvpSenderPolicy, rsvpSenderAdspecBreak, rsvpSenderAdspecHopCount, rsvpSenderAdspecPathBw, rsvpSenderAdspecMinLatency, rsvpSenderAdspecMtu, rsvpSenderAdspecGuaranteedSvc, rsvpSenderAdspecGuaranteedBreak, rsvpSenderAdspecGuaranteedCtot, rsvpSenderAdspecGuaranteedDtot, rsvpSenderAdspecGuaranteedCsum, rsvpSenderAdspecGuaranteedDsum, rsvpSenderAdspecGuaranteedHopCount, rsvpSenderAdspecGuaranteedPathBw, rsvpSenderAdspecGuaranteedMinLatency, rsvpSenderAdspecGuaranteedMtu, rsvpSenderAdspecCtrlLoadSvc, rsvpSenderAdspecCtrlLoadBreak, rsvpSenderAdspecCtrlLoadHopCount, rsvpSenderAdspecCtrlLoadPathBw, rsvpSenderAdspecCtrlLoadMinLatency, rsvpSenderAdspecCtrlLoadMtu, rsvpSenderNewIndex } STATUS current DESCRIPTION "These objects are required for RSVP Systems." ::= { rsvpGroups 2 } Baker and Krawczyk Expires December 1997 [Page 75] Internet Draft RSVP MIB June 1997 rsvpResvGroup OBJECT-GROUP OBJECTS { rsvpResvType, rsvpResvDestAddr, rsvpResvSenderAddr, rsvpResvDestAddrLength, rsvpResvSenderAddrLength, rsvpResvProtocol, rsvpResvDestPort, rsvpResvPort, rsvpResvHopAddr, rsvpResvHopLih, rsvpResvInterface, rsvpResvService, rsvpResvTSpecRate, rsvpResvTSpecBurst, rsvpResvTSpecPeakRate, rsvpResvTSpecMinTU, rsvpResvTSpecMaxTU, rsvpResvRSpecRate, rsvpResvRSpecSlack, rsvpResvInterval, rsvpResvScope, rsvpResvShared, rsvpResvExplicit, rsvpResvRSVPHop, rsvpResvLastChange, rsvpResvPolicy, rsvpResvStatus, rsvpResvNewIndex } STATUS current DESCRIPTION "These objects are required for RSVP Systems." ::= { rsvpGroups 3 } rsvpResvFwdGroup OBJECT-GROUP OBJECTS { rsvpResvFwdType, rsvpResvFwdDestAddr, rsvpResvFwdSenderAddr, rsvpResvFwdDestAddrLength, rsvpResvFwdSenderAddrLength, rsvpResvFwdProtocol, rsvpResvFwdDestPort, rsvpResvFwdPort, rsvpResvFwdHopAddr, rsvpResvFwdHopLih, rsvpResvFwdInterface, rsvpResvFwdNewIndex, rsvpResvFwdService, rsvpResvFwdTSpecPeakRate, rsvpResvFwdTSpecMinTU, rsvpResvFwdTSpecMaxTU, rsvpResvFwdTSpecRate, rsvpResvFwdTSpecBurst, rsvpResvFwdRSpecRate, rsvpResvFwdRSpecSlack, rsvpResvFwdInterval, rsvpResvFwdScope, rsvpResvFwdShared, rsvpResvFwdExplicit, rsvpResvFwdRSVPHop, rsvpResvFwdLastChange, rsvpResvFwdPolicy, rsvpResvFwdStatus } STATUS current DESCRIPTION "These objects are optional, used for some RSVP Systems." ::= { rsvpGroups 4 } Baker and Krawczyk Expires December 1997 [Page 76] Internet Draft RSVP MIB June 1997 rsvpIfGroup OBJECT-GROUP OBJECTS { rsvpIfUdpNbrs, rsvpIfIpNbrs, rsvpIfNbrs, rsvpIfEnabled, rsvpIfUdpRequired, rsvpIfRefreshBlockadeMultiple, rsvpIfRefreshMultiple, rsvpIfRefreshInterval, rsvpIfTTL, rsvpIfRouteDelay, rsvpIfStatus } STATUS current DESCRIPTION "These objects are required for RSVP Systems." ::= { rsvpGroups 6 } rsvpNbrGroup OBJECT-GROUP OBJECTS { rsvpNbrProtocol, rsvpNbrStatus } STATUS current DESCRIPTION "These objects are required for RSVP Systems." ::= { rsvpGroups 7 } rsvpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { newFlow, lostFlow } STATUS current DESCRIPTION "This notification is required for Systems sup- porting the RSVP Policy Module using an SNMP interface to the Policy Manager." ::= { rsvpGroups 8 } END Baker and Krawczyk Expires December 1997 [Page 77] Internet Draft RSVP MIB June 1997 6. Security Issues Security issues for this MIB are entirely covered by the SNMP Security Architecture, and have not been expanded within the contents of this MIB. RSVP has its own set of security issues, which are outside the scope of this MIB. 7. Authors' Addresses Fred Baker Postal: Cisco Systems 519 Lado Drive Santa Barbara, California 93111 Tel: +1 805 681 0115 E-Mail: fred@cisco.com John Krawczyk Postal: ArrowPoint Communications 235 Littleton Road Westford, Massachusetts 01886 Tel: +1 508 692 5875 E-Mail: jjk@tiac.net" 8. Acknowledgements This document was produced by the RSVP Working Group. Baker and Krawczyk Expires December 1997 [Page 78] Internet Draft RSVP MIB June 1997 9. References [1] M.T. Rose (editor), Management Information Base for Network Management of TCP/IP-based internets, Internet Working Group Request for Comments 1213. Network Information Center, SRI International, Menlo Park, California, (May, 1990). [2] Information processing systems - Open Systems Interconnection - Specification of Abstract Syntax Notation One (ASN.1), International Organization for Standardization. International Standard 8824, (December, 1987). [3] Information processing systems - Open Systems Interconnection - Specification of Basic Encoding Rules for Abstract Notation One (ASN.1), International Organization for Standardization. International Standard 8825, (December, 1987). Baker and Krawczyk Expires December 1997 [Page 79] Internet Draft RSVP MIB June 1997 Table of Contents 1 Status of this Memo ................................... 1 2 Abstract .............................................. 2 3 The SNMPv2 Network Management Framework ............... 3 3.1 Object Definitions .................................. 3 4 Overview .............................................. 3 4.1 Textual Conventions ................................. 3 4.2 Structure of MIB .................................... 4 4.3 Semantics of Writing the Path and Reservation State Databases .................................... 4 4.4 Intended use of Flow Notifications .................. 5 4.4.1 The lostFlow Notification ......................... 5 4.4.2 The newFlow Notification .......................... 5 5 Definitions ........................................... 6 5.1 RSVP Session Statistics Database .................... 7 5.1 RSVP Session Sender Database ........................ 11 5.2 RSVP Reservations Requested Database ................ 31 5.3 RSVP Reservation Requests Database .................. 43 5.4 RSVP Interface Attributes Database .................. 55 5.5 RSVP Neighbor Database .............................. 60 5.4 Notifications ....................................... 62 6 Security Issues ....................................... 78 7 Authors' Addresses .................................... 78 8 Acknowledgements ...................................... 78 9 References ............................................ 79 Baker and Krawczyk Expires December 1997 [Page 80]