Internet Engineering Task Force L. Velvindron Internet-Draft Hackers.mu Updates: 4419 (if approved) M. Baushke Intended status: Standards Track Juniper Networks, Inc. Expires: November 17, 2017 May 16, 2017 Increase minimum recommended modulus size to 2048 bits draft-ietf-curdle-ssh-dh-group-exchange-01 Abstract The Diffie-Hellman (DH) Group Exchange for the Secure Shell (SSH) Transport layer Protocol specifies that servers and clients should support groups with a modulus length of k bits, where the recommended minumum value is 1024 bits. Recent security research has shown that a minimum value of 1024 bits is insufficient against state-sponsored actors. As such, this document formally updates the specification such that the minimum recommended value for k is 2048 bits and the group size is 2048 bits at minimum. This RFC updates RFC4419 which allowed for DH moduli less than 2048 bits. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on November 17, 2017. Copyright Notice Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents Velvindron & Baushke Expires November 17, 2017 [Page 1] Internet-Draft Recommended minimum modulus size May 2017 carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. 1. Introduction [RFC4419] specifies a recommended minimum size of 1024 bits for k, which is the modulus length of the DH Group. It also suggests that in all cases, the size of the group needs be at least 1024 bits. This document updates [RFC4419] so that the minimum recommended size be 2048 bits. 1.1. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. 2. 2048 bits DH Group Recent research [LOGJAM] strongly suggests that DH groups that are 1024 bits can be broken by state actors, and possibly an organization with enough computing resources. The authors show how they are able to break 768 bits DH group and extrapolate the attack to 1024 bits DH groups. In their analysis, they show that breaking 1024 bits can be done with enough computing resources. This document updates section 3 Paragraph 9 : Servers and clients SHOULD support groups with a modulus length of k bits where 2048 <= k <= 8192. The recommended minimum values for min and max are 2048 and 8192, respectively. This document also updates Section 3 Paragraph 11: In all cases, ths size of the group SHOULD be at least 2048 bits. Velvindron & Baushke Expires November 17, 2017 [Page 2] Internet-Draft Recommended minimum modulus size May 2017 3. Security Considerations This document discusses security issues of DH groups that are 1024 bits in size, and formally updates the minimum size of DH groups to be 2048 bits. 4. IANA Considerations This document contains no considerations for IANA. 5. References 5.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . 5.2. Informative References [LOGJAM] Adrian, D., Bhargavan, K., Durumeric, Z., Gaudry, P., Green, M., Halderman, J., Heninger, N., Springall, D., ThomAƒA(C), E., Valenta, L., VanderSloot, B., Wustrow, E., Zanella-BAƒA(C)guelin, S., and P. Zimmermann, "Imperfect Forward Secrecy: How Diffie-Hellman Fails in Practice", ACM Conference on Computer and Communications Security (CCS) 2015, 2015, . [RFC4419] Friedl, M., Provos, N., and W. Simpson, "Diffie-Hellman Group Exchange for the Secure Shell (SSH) Transport Layer Protocol", RFC 4419, DOI 10.17487/RFC4419, March 2006, . Authors' Addresses Loganaden Velvindron Hackers.mu 88, Avenue De Plevitz Roches Brunes MU Phone: +230 59762817 Email: logan@hackers.mu Velvindron & Baushke Expires November 17, 2017 [Page 3] Internet-Draft Recommended minimum modulus size May 2017 Mark D. Baushke Juniper Networks, Inc. Email: mdb@juniper.net Velvindron & Baushke Expires November 17, 2017 [Page 4]