Network Working Group E. Allman Internet-Draft Sendmail, Inc. Intended status: Standards Track J. Fenton Expires: June 20, 2009 Cisco Systems, Inc. M. Delany Yahoo! Inc. J. Levine Taughannock Networks December 17, 2008 DomainKeys Identified Mail (DKIM) Author Domain Signing Practices (ADSP) draft-ietf-dkim-ssp-08 Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on June 20, 2009. Abstract DomainKeys Identified Mail (DKIM) defines a domain-level authentication framework for email to permit verification of the source and contents of messages. This document specifies an adjunct mechanism to aid in assessing messages that do not contain a DKIM signature for the domain used in the author's address. It defines a record that can advertise whether a domain signs its outgoing mail, and how other hosts can access that record. Allman, et al. Expires June 20, 2009 [Page 1] Internet-Draft ADSP December 2008 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Language and Terminology . . . . . . . . . . . . . . . . . . . 4 2.1. Terms Imported from DKIM Signatures Specification . . . . 4 2.2. Valid Signature . . . . . . . . . . . . . . . . . . . . . 5 2.3. Author Address . . . . . . . . . . . . . . . . . . . . . . 5 2.4. Author Domain . . . . . . . . . . . . . . . . . . . . . . 5 2.5. Alleged Author . . . . . . . . . . . . . . . . . . . . . . 5 2.6. Author Domain Signing Practices . . . . . . . . . . . . . 5 2.7. Author Signature . . . . . . . . . . . . . . . . . . . . . 5 3. Operation Overview . . . . . . . . . . . . . . . . . . . . . . 6 3.1. ADSP Applicability . . . . . . . . . . . . . . . . . . . . 6 3.2. ADSP Usage . . . . . . . . . . . . . . . . . . . . . . . . 6 3.3. ADSP Results . . . . . . . . . . . . . . . . . . . . . . . 7 4. Detailed Description . . . . . . . . . . . . . . . . . . . . . 7 4.1. DNS Representation . . . . . . . . . . . . . . . . . . . . 7 4.2. Publication of ADSP Records . . . . . . . . . . . . . . . 8 4.3. ADSP Lookup Procedure . . . . . . . . . . . . . . . . . . 8 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 10 5.1. ADSP Specification Tag Registry . . . . . . . . . . . . . 10 5.2. ADSP Outbound Signing Practices Registry . . . . . . . . . 10 6. Security Considerations . . . . . . . . . . . . . . . . . . . 11 6.1. ADSP Threat Model . . . . . . . . . . . . . . . . . . . . 11 6.2. DNS Considerations . . . . . . . . . . . . . . . . . . . . 12 6.3. DNS Wildcards . . . . . . . . . . . . . . . . . . . . . . 12 7. References . . . . . . . . . . . . . . . . . . . . . . . . . . 13 7.1. References - Normative . . . . . . . . . . . . . . . . . . 13 7.2. References - Informative . . . . . . . . . . . . . . . . . 13 Appendix A. Lookup Examples . . . . . . . . . . . . . . . . . . . 13 A.1. Domain and ADSP exist . . . . . . . . . . . . . . . . . . 14 A.2. Domain exists, ADSP does not exist . . . . . . . . . . . . 14 A.3. Domain does not exist . . . . . . . . . . . . . . . . . . 14 Appendix B. Usage Examples . . . . . . . . . . . . . . . . . . . 15 B.1. Single Location Domains . . . . . . . . . . . . . . . . . 15 B.2. Bulk Mailing Domains . . . . . . . . . . . . . . . . . . . 15 B.3. Bulk Mailing Domains with Discardable Mail . . . . . . . . 16 B.4. Third Party Senders . . . . . . . . . . . . . . . . . . . 16 B.5. Domains with Independent Users and Liberal Use Policies . 16 B.6. Non-email Domains . . . . . . . . . . . . . . . . . . . . 16 Appendix C. Acknowledgements . . . . . . . . . . . . . . . . . . 17 Appendix D. Change Log . . . . . . . . . . . . . . . . . . . . . 17 D.1. Changes since -ietf-dkim-07 . . . . . . . . . . . . . . . 17 D.2. Changes since -ietf-dkim-06 . . . . . . . . . . . . . . . 17 D.3. Changes since -ietf-dkim-05 . . . . . . . . . . . . . . . 17 D.4. Changes since -ietf-dkim-04 . . . . . . . . . . . . . . . 17 D.5. Changes since -ietf-dkim-03 . . . . . . . . . . . . . . . 18 D.6. Changes since -ietf-dkim-02 . . . . . . . . . . . . . . . 19 Allman, et al. Expires June 20, 2009 [Page 2] Internet-Draft ADSP December 2008 D.7. Changes since -ietf-dkim-ssp-01 . . . . . . . . . . . . . 19 D.8. Changes since -ietf-dkim-ssp-00 . . . . . . . . . . . . . 20 D.9. Changes since -allman-ssp-02 . . . . . . . . . . . . . . . 21 D.10. Changes since -allman-ssp-01 . . . . . . . . . . . . . . . 21 D.11. Changes since -allman-ssp-00 . . . . . . . . . . . . . . . 21 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 22 Intellectual Property and Copyright Statements . . . . . . . . . . 23 Allman, et al. Expires June 20, 2009 [Page 3] Internet-Draft ADSP December 2008 1. Introduction DomainKeys Identified Mail (DKIM) defines a mechanism by which email messages can be cryptographically signed, permitting a signing domain to claim responsibility for the introduction of a message into the mail stream. Message recipients can verify the signature by querying the signer's domain directly to retrieve the appropriate public key, and thereby confirm that the message was attested to by a party in possession of the private key for the signing domain. However, the legacy of the Internet is such that not all messages will be signed, and the absence of a signature on a message is not an a priori indication of forgery. In fact, during early phases of deployment it is very likely that most messages will remain unsigned. However, some domains might decide to sign all of their outgoing mail, for example, to protect their brand names. It might be desirable for such domains to be able to advertise that fact to other hosts. This is the topic of Author Domain Signing Practices (ADSP). Hosts implementing this specification can inquire what Author Signing Practices a domain advertises. This inquiry is called an Author Signing Practices check. The basic requirements for ADSP are given in [RFC5016]. This document refers extensively to [RFC4871] and assumes the reader is familiar with it. Requirements Notation: The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119] 2. Language and Terminology 2.1. Terms Imported from DKIM Signatures Specification Some terminology used herein is derived directly from [RFC4871]. In several cases, references in that document to Sender have been changed to Author here, to emphasize the relationship to the Author address(es) in the From: header field described in [RFC5322]. Briefly, o A "Signer" is the agent that signs a message, as defined in section 2.1 of [RFC4871]. o A "Local-part" is the part of an address preceding the @ character, as defined in [RFC5322] and used in [RFC4871]. Allman, et al. Expires June 20, 2009 [Page 4] Internet-Draft ADSP December 2008 2.2. Valid Signature A "Valid Signature" is any signature on a message which correctly verifies using the procedure described in section 6.1 of [RFC4871]. 2.3. Author Address An "Author Address" is an email address in the From header field of a message [RFC5322]. If the From header field contains multiple addresses, the message has multiple Author Addresses. 2.4. Author Domain An "Author Domain" is everything to the right of the "@" in an Author Address (excluding the "@" itself). 2.5. Alleged Author An "Alleged Author" is an Author Address of a message; it is "alleged" because it has not yet been checked. 2.6. Author Domain Signing Practices "Author Domain Signing Practices" (or just "practices") consist of a machine-readable record published by the domain of an Alleged Author which includes statements about the domain's practices with respect to mail it sends with its domain in the From: line. 2.7. Author Signature An "Author Signature" is any Valid Signature where the identity of the user or agent on behalf of which the message is signed (listed in the "i=" tag or its default value from the "d=" tag) matches an Author Address in the message. When the identity of the user or agent includes a Local-part, the identities match if the Local-parts are the same string, and the domains are the same string. Otherwise, the identities match if the domains are the same string. Following [RFC5321], Local-part comparisons are case sensitive, but domain comparisons are case insensitive. For example, if a message has a Valid Signature, with the DKIM- Signature field containing "i=a@domain.example", then domain.example is asserting that it takes responsibility for the message. If the message's From: field contains the address "b@domain.example" and an ADSP query produces a "dkim=all" or "dkim=discardable" result, that would mean that the message does not have a valid Author Signature. Even though the message is signed by the same domain, it fails to satisfy ADSP. Allman, et al. Expires June 20, 2009 [Page 5] Internet-Draft ADSP December 2008 3. Operation Overview Domain owners can publish ADSP information via a query mechanism such as the Domain Name System; specific details are given in Section 4.1. Hosts can look up the ADSP information of the domain(s) specified by the Author Address(es) as described in Section 4.3. If a message has multiple Author Addresses the ADSP lookups SHOULD be performed independently on each address. This document does not address the process a host might use to combine the lookup results. 3.1. ADSP Applicability ADSP as defined in this document is bound to DNS. For this reason, ADSP is applicable only to Author Domains with appropriate DNS records (see Note below). The handling of other Author Domains is outside the scope of this document. However, attackers may use such domain names in a deliberate attempt to sidestep an organization's ADSP policy statements. It is up to the ADSP checker implementation to return an appropriate error result for Author Domains outside the scope of ADSP. ADSP applies to specific domains, not domain subtrees. If, for example, an Author Address were user@domain.example, the Author Domain would be domain.example, and the applicable ADSP record would be at _adsp._domainkey.domain.example. An Author Address in a subdomain such as user@sub.domain.example would have a different ADSP record at _adsp._domainkey.sub.domain.example. ADSP makes no connection between a domain and its parent or child domains. Note: The results from DNS queries that are intended to validate a domain name unavoidably approximate the set of Author Domains that can appear in legitimate email. For example, a DNS A record could belong to a device that does not even have an email implementation. It is up to the checker to decide what degree of approximation is acceptable. 3.2. ADSP Usage Depending on the Author Domain(s) and the signatures in a message, a recipient gets varying amounts of useful information from each ADSP lookup. o If a message has no Valid Signature, the ADSP result is directly relevant to the message. o If a message has a Valid Signature from an Author Domain, ADSP provides no benefit relative to that domain since the message is Allman, et al. Expires June 20, 2009 [Page 6] Internet-Draft ADSP December 2008 already known to be compliant with any possible ADSP for that domain. o If a message has a Valid Signature from a domain other than an Author Domain, the receiver can use both the Signature and the ADSP result in its evaluation of the message. 3.3. ADSP Results An ADSP lookup for an Author Address produces one of four possible results: o Messages from this domain might or might not have an author signature. This is the default if the domain exists in the DNS but no ADSP record is found. o All messages from this domain are signed. o All messages from this domain are signed and discardable, i.e., if a message arrives without a valid Author Signature, the domain encourages the recipient(s) to discard it. o This domain is out of scope, i.e., the domain does not exist in the DNS. An ADSP lookup could terminate without producing any result if a DNS lookup results in a temporary failure. 4. Detailed Description 4.1. DNS Representation ADSP records are published using the DNS TXT resource record type. The RDATA for ADSP resource records is textual in format, with specific syntax and semantics relating to their role in describing ADSP. The "Tag=Value List" syntax described in section 3.2 of [RFC4871] is used, modified to use WSP rather than FWS. Records not in compliance with that syntax or the syntax of individual tags described in Section 4.3 MUST be ignored (considered equivalent to a NODATA result) for purposes of ADSP, although they MAY cause the logging of warning messages via an appropriate system logging mechanism. If the RDATA contains multiple character strings, the strings are logically concatenated with no delimiters between the strings. Allman, et al. Expires June 20, 2009 [Page 7] Internet-Draft ADSP December 2008 Note: ADSP changes the "Tag=Value List" syntax from [RFC4871] to use WSP rather than FWS in its DNS records. Domains MUST NOT publish ADSP records with wildcard names. Wildcards within a domain publishing ADSP records pose a particular problem, as discussed in more detail in Section 6.3. 4.2. Publication of ADSP Records ADSP is intended to apply to all mail sent using the domain name string of an Alleged Author. 4.2.1. Record Syntax ADSP records use the "tag=value" syntax described in section 3.2 of [RFC4871], modified to use WSP rather than FWS. Every ADSP record MUST start with an outbound signing practices tag, so the first four characters of the record are lower case "dkim", followed by optional whitespace and "=". Tags used in ADSP records are described below. Unrecognized tags MUST be ignored. In the ABNF below, the WSP token, and the ALPHA and DIGIT tokens are imported from [RFC5234]. dkim= Outbound signing practices for the domain (plain-text; REQUIRED). Possible values are as follows: unknown The domain might sign some or all email. all All mail from the domain is signed with an Author Signature. discardable All mail from the domain is signed with an Author Signature. Furthermore, if a message arrives without a valid Author Signature due to modification in transit, submission via a path without access to a signing key, or any other reason, the domain encourages the recipient(s) to discard it. Any other values are treated as "unknown". ABNF: adsp-dkim-tag = %x64.6b.69.6d *WSP "=" *WSP ("unknown" / "all" / "discardable") 4.3. ADSP Lookup Procedure Hosts doing an ADSP lookup MUST produce a result that is semantically equivalent to applying the following steps in the order listed below. In practice, these steps can be performed in parallel in order to Allman, et al. Expires June 20, 2009 [Page 8] Internet-Draft ADSP December 2008 improve performance. However, implementations SHOULD avoid doing unnecessary DNS lookups. For the purposes of this section a "valid ADSP record" is one that is both syntactically and semantically correct; in particular, it matches the ABNF for a "tag-list" and starts with a valid "dkim" tag. Check Domain Scope: An ADSP checker implementation MUST determine whether a given Author Domain is within scope for ADSP. Given the background in Section 3.1 the checker MUST decide which degree of approximation is acceptable. The checker MUST return an appropriate error result for Author Domains that are outside the scope of ADSP. The host MUST perform a DNS query for a record corresponding to the Author Domain (with no prefix). The type of the query can be of any type, since this step is only to determine if the domain itself exists in DNS. This query MAY be done in parallel with the query to fetch the named ADSP Record. If the result of this query is that the Author domain does not exist in the DNS (often called an "NXDOMAIN" error, rcode=3 in [RFC1035]), the algorithm MUST terminate with an error indicating that the domain is out of scope. Note that a result with rcode=0 but no records (often called "NODATA") is not the same as NXDOMAIN. NON-NORMATIVE DISCUSSION: Any resource record type could be used for this query since the existence of a resource record of any type will prevent an "NXDOMAIN" error. MX is a reasonable choice for this purpose because this record type is thought to be the most common for domains used in e-mail, and will therefore produce a result which can be more readily cached than a negative result. If the domain does exist, the checker MAY make more extensive checks to verify the existence of the domain, such as the ones described in Section 5 of [RFC5321]. If those checks indicate that the Author domain does not exist for mail, e.g., the domain has no MX, A, or AAAA record, the checker SHOULD terminate with an error indicating that the domain is out of scope. Fetch Named ADSP Record: The host MUST query DNS for a TXT record corresponding to the Author Domain prefixed by "_adsp._domainkey." (note the trailing dot). If the result of this query is a "NOERROR" response (rcode=0 in [RFC1035]) with an answer which is a single record that is a valid ADSP record, use that record, and the algorithm terminates. Allman, et al. Expires June 20, 2009 [Page 9] Internet-Draft ADSP December 2008 If the result of the query is NXDOMAIN or NOERROR with zero records, there is no ADSP record. If the result of the query contains more than one record, or a record that is not a valid ADSP record, the ADSP result is undefined. If a query results in a "SERVFAIL" error response (rcode=2 in [RFC1035]), the algorithm terminates without returning a result; possible actions include queuing the message or returning an SMTP error indicating a temporary failure. See Appendix A for examples of ADSP Lookup. 5. IANA Considerations ADSP adds the following namespaces to the IANA registry. In all cases, new values are assigned only for values that have been documented in a published RFC after IETF Review as specified in [RFC5226]. 5.1. ADSP Specification Tag Registry An ADSP record provides for a list of specification tags. IANA has established the ADSP Specification Tag Registry for specification tags that can be used in ADSP fields. The initial entry in the registry is: +------+-----------------+ | TYPE | REFERENCE | +------+-----------------+ | dkim | (this document) | +------+-----------------+ ADSP Specification Tag Registry Initial Values 5.2. ADSP Outbound Signing Practices Registry The "dkim=" tag spec, defined in Section 4.2.1, provides for a value specifying Outbound Signing Practices. IANA has established the ADSP Outbound Signing Practices Registry for Outbound Signing Practices. The initial entries in the registry comprise: Allman, et al. Expires June 20, 2009 [Page 10] Internet-Draft ADSP December 2008 +-------------+-----------------+ | TYPE | REFERENCE | +-------------+-----------------+ | unknown | (this document) | | all | (this document) | | discardable | (this document) | +-------------+-----------------+ ADSP Outbound Signing Practices Registry Initial Values 6. Security Considerations Security considerations in the ADSP are mostly related to attempts on the part of malicious senders to represent themselves as authors for whom they are not authorized to send mail, often in an attempt to defraud either the recipient or an Alleged Author. Additional security considerations regarding Author Domain Signing Practices are found in the DKIM threat analysis [RFC4686]. 6.1. ADSP Threat Model Email recipients often have a core set of content authors that they already trust. Common examples include financial institutions with which they have an existing relationship and Internet web transaction sites with which they conduct business. Email abuse often seeks to exploit a legitimate email author's name- recognition among recipients, by using the author's domain name in the From: header field. Especially since many popular MUAs do not display the author's email address, there is no empirical evidence of the extent that this particular unauthorized use of a domain name contributes to recipient deception or that eliminating it will have significant effect. However, closing this exploit could facilitate some types of optimized processing by receive-side message filtering engines, since it could permit them to maintain higher-confidence assertions about From: header field uses of a domain, when the occurrence is authorized. Unauthorized uses of domain names occur elsewhere in messages, as do unauthorized uses of organizations' names. These attacks are outside the scope of this specification. ADSP does not provide any benefit--nor, indeed, have any effect at all--unless an external system acts upon the verdict, either by treating the message differently during the delivery process or by Allman, et al. Expires June 20, 2009 [Page 11] Internet-Draft ADSP December 2008 showing some indicator to the end recipient. Such a system is out of scope for this specification. ADSP checkers may perform multiple DNS lookups per Alleged Author Domain. Since these lookups are driven by domain names in email message headers of possibly fraudulent email, legitimate ADSP checkers can become participants in traffic multiplication attacks on domains that appear in fraudulent email. 6.2. DNS Considerations An attacker might attack the DNS infrastructure in an attempt to impersonate ADSP records to influence a receiver's decision on how it will handle mail. However, such an attacker is more likely to attack at a higher level, e.g., redirecting A or MX record lookups in order to capture traffic that was legitimately intended for the target domain. These DNS security issues are addressed by DNSSEC [RFC4033]. Because ADSP operates within the framework of the legacy e-mail system, the default result in the absence of an ADSP record is that the domain does not sign all of its messages. It is therefore important that the ADSP clients distinguish a DNS failure such as "SERVFAIL" from other DNS errors so that appropriate actions can be taken. 6.3. DNS Wildcards DNS wildcards (described in [RFC4592]) that exist in the DNS hierarchy at or above the domain being checked interfere with the ability to verify the scope of the ADSP check described in Section 4.3. For example, a wildcard record for *.domain.example makes all subdomains such as foo.domain.example exist in the DNS. Domains that intend to make active use of ADSP by publishing a practice other than Unknown are advised to avoid the use of wildcards elsewhere in their hierarchy. If a domain contains wildcards, then any name that matches the wildcard can appear to be a valid mail domain eligible for ADSP. But the "_adsp._domainkey." prefix on ADSP records does not allow publication of wildcard records that cover ADSP records without also covering non-ADSP records, nor of wildcard records that cover non- ADSP records without also covering ADSP records. Hence a domain MUST NOT publish wildcard ADSP records. 7. References Allman, et al. Expires June 20, 2009 [Page 12] Internet-Draft ADSP December 2008 7.1. References - Normative [RFC1035] Mockapetris, P., "Domain names - implementation and specification", STD 13, RFC 1035, November 1987. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC4033] Arends, R., Austein, R., Larson, M., Massey, D., and S. Rose, "DNS Security Introduction and Requirements", RFC 4033, March 2005. [RFC4592] Lewis, E., "The Role of Wildcards in the Domain Name System", RFC 4592, July 2006. [RFC4871] Allman, E., Callas, J., Delany, M., Libbey, M., Fenton, J., and M. Thomas, "DomainKeys Identified Mail (DKIM) Signatures", RFC 4871, May 2007. [RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 5226, May 2008. [RFC5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, January 2008. [RFC5322] Resnick, P., Ed., "Internet Message Format", RFC 5322, October 2008. 7.2. References - Informative [RFC4686] Fenton, J., "Analysis of Threats Motivating DomainKeys Identified Mail (DKIM)", RFC 4686, September 2006. [RFC5016] Thomas, M., "Requirements for a DomainKeys Identified Mail (DKIM) Signing Practices Protocol", RFC 5016, October 2007. [RFC5321] Klensin, J., "Simple Mail Transfer Protocol", RFC 5321, October 2008. Appendix A. Lookup Examples Assume the example domain publishes these DNS records: (In these examples, the numbers in parentheses are comments to help identify the records, not part of the records themselves.) Allman, et al. Expires June 20, 2009 [Page 13] Internet-Draft ADSP December 2008 aaa.example A 192.0.2.1 (1) _adsp._domainkey.aaa.example TXT "dkim=all" (2) bbb.example MX 10 mail.bbb.example (3) mail.bbb.example A 192.0.2.2 (4) A.1. Domain and ADSP exist A mail message contains this From: header line: From: bob@aaa.example (Bob the Author) The ADSP Lookup first identifies the Author Address bob@aaa.example and the Author Domain aaa.example. It does an MX DNS query for aaa.example, and gets back a NOERROR result with no DNS records. (There's no MX record, but since record (1) exists, the name exists in the DNS.) Since that query didn't return an error, the Lookup proceeds to a TXT DNS query for _adsp._domainkey.aaa.example, which returns record (2). Since this is a valid DKIM record, the result is that all messages from this domain are signed. A.2. Domain exists, ADSP does not exist A mail message contains this From: header line: From: alice@bbb.example (Old-fashioned Alice) The ADSP Lookup first identifies the Author Address alice@bbb.example and the Author Domain bbb.example. It does an MX DNS query for bbb.example, and gets back record (3). Since that query didn't return an error, it then proceeds to a TXT DNS query for _adsp._domainkey.bbb.example, which returns NXDOMAIN. Since the domain exists but there is no ADSP record, ADSP returns the default unknown result: messages may or may not have an author signature. A.3. Domain does not exist A mail message contains this From: header line: From: frank@ccc.example (Unreliable Frank) The ADSP Lookup first identifies the Author Address frank@ccc.example and the Author Domain ccc.example. It does an MX DNS query for ccc.example, and gets back an NXDOMAIN result since there are no records at all for ccc.example. The lookup terminates with the result that the domain does not exist in the DNS and so is out of scope. Allman, et al. Expires June 20, 2009 [Page 14] Internet-Draft ADSP December 2008 Appendix B. Usage Examples These examples are intended to illustrate typical uses of ADSP. They are not intended to be exhaustive, nor to apply to every domain's or mail system's individual situation. Domain managers are advised to consider the ways that mail processing can modify messages in ways that will invalidate an existing DKIM signature, such as mailing lists, courtesy forwarders, and other paths that could add or modify headers, or modify the message body. In that case, if the modifications invalidate the DKIM signature, recipient hosts will consider the mail not to have an Author Signature, even though the signature was present when the mail was originally sent. B.1. Single Location Domains A common mail system configuration handles all of a domain's users' incoming and outgoing mail through a single MTA or group of MTAs. In that case, the MTA(s) can be configured to sign outgoing mail with an Author Signature. In this situation it might be appropriate to publish an ADSP record for the domain containing "all", depending on whether the users also send mail through other paths that do not apply an Author Signature. Such paths could include MTAs at hotels or hotspot networks used by travelling users, web sites that provide "mail an article" features, user messages sent through mailing lists, or third party mail clients that support multiple user identities. B.2. Bulk Mailing Domains Another common configuration uses a domain solely for bulk or broadcast mail, with no individual human users, again typically sending all the mail through a single MTA or group of MTAs that can apply an Author Signature. In this case, the domain's management can be confident that all of its outgoing mail will be sent through the signing MTA. Lacking individual users, the domain is unlikely to participate in mailing lists, but could still send mail through other paths that might invalidate signatures. Domain owners often use specialist mailing providers to send their bulk mail. In that case, the mailing provider needs access to a suitable signing key in order to apply an Author Signature. One possible route would be for the domain owner to generate the key and give it to the mailing provider. Another would be for the domain to delegate a subdomain to the mailing provider, for example, bigbank.example might delegate email.bigbank.example to such a Allman, et al. Expires June 20, 2009 [Page 15] Internet-Draft ADSP December 2008 provider. In that case, the provider can generate the keys and DKIM DNS records itself and use the subdomain in the Author address in the mail. Regardless of the DNS and key management strategy chosen, whoever maintains the DKIM records for the domain could also install an ADSP record containing "all". B.3. Bulk Mailing Domains with Discardable Mail In some cases, a domain might sign all of its outgoing mail with an Author Signature, but prefer that recipient systems discard mail without a valid Author Signature to avoid confusion from mail sent from sources that do not apply an Author Signature. (In the case of domains with tightly controlled outgoing mail, this latter kind of mail is sometimes loosely called "forgeries".) In that case, it might be appropriate to publish an ADSP record containing "discardable". Note that a domain SHOULD NOT publish a "discardable" record if it wishes to maximize the likelihood that mail from the domain is delivered, since it could cause some fraction of the mail the domain sends to be discarded. B.4. Third Party Senders Another common use case is for a third party to enter into an agreement whereby that third party will send bulk or other mail on behalf of a designated author or author domain, using that domain in the RFC5322 From: or other headers. Due to the many and varied complexities of such agreements, third party signing is not addressed in this specification. B.5. Domains with Independent Users and Liberal Use Policies When a domain has independent users and its usage policy does not explicitly restrict them to sending mail only from designated mail servers (e.g. many ISP domains and even some corporate domains), then it is only appropriate to publish an ADSP record containing "unknown". Publishing either "all" or "discardable" will likely result in significant breakage because independent users are likely to send mail from the external paths enumerated in Appendix B.1. B.6. Non-email Domains If a domain sends no mail at all, it can safely publish a "discardable" ADSP record, since any mail with an author address in the domain is a forgery. Allman, et al. Expires June 20, 2009 [Page 16] Internet-Draft ADSP December 2008 Appendix C. Acknowledgements This document greatly benefited from comments by Steve Atkins, Jon Callas, Dave Crocker, JD Falk, Arvel Hathcock, Ellen Siegel, Michael Thomas, and Wietse Venema. Appendix D. Change Log *NOTE TO RFC EDITOR: This section may be removed upon publication of this document as an RFC.* D.1. Changes since -ietf-dkim-07 Clarify that ADSP records use WSP rather than FWS in 4.1 and 4.2.1. D.2. Changes since -ietf-dkim-06 Minor editorial changes suggested by AD: o expand DKIM in title o clarify that there's no subdomain matching in Section 3.1 o ADSP lookup can terminate without a result if the DNS lookup fails o random dkim= values are treated as unknown o in 4.2 note WSP not FWS o in 4.3 note that NODATA is not NXDOMAIN o add new Appendix A with lookup examples Also address Tony's nits in http://mipassoc.org/pipermail/ietf-dkim/2008q3/010720.html. Make the examples consistently use the .example domain. D.3. Changes since -ietf-dkim-05 Minor editorial nits: define NOERROR, SERVFAIL, NXDOMAIN as rfc1035 rcodes, change some punctuation, IANA section change IETF Consensus to the new IETF Review. D.4. Changes since -ietf-dkim-04 Allman, et al. Expires June 20, 2009 [Page 17] Internet-Draft ADSP December 2008 o Require dkim at the front of each record. o Disparage wildcard records. o Changed ABNF use of whitespace from FWS back to WSP, dkim-base is wrong. o RFC 2434 -> 5226, make ref to 4686 informational since it's not standards track. o Improve examples with material from Ellen. D.5. Changes since -ietf-dkim-03 o Name change for title and filename, to be ADSP o String changes throughout, to author Domain signing practices and to aDsp. o Added some keywords. o Clarified comparison of local part and domain in Author Address. o Streamlined the Abstract. o Revised text of last bullet in Results list. o Removed definitions not used in the document. o Removed all specification details pertaining to sub-domains. o Moved Lookup Procedure up one document level. o Revised domain validity specification. Part in ADSP Usage in Operations section, and part as it as first step in Lookup. o Fixed xml for figures, including labeling ABNF with new xml2rfc construct. o Revised wildcard text. o Removed 't' tag. o Removed ADSP Flags Registry section. o Changed ABNF use of whitespace from WSP back to FWS, for consistency with dkim-base. Allman, et al. Expires June 20, 2009 [Page 18] Internet-Draft ADSP December 2008 D.6. Changes since -ietf-dkim-02 o Merge in more text from ADSP draft. o Phrase actions as host's rather than checker. o Explanatory description of i= matching. o Lookup procedure consistently refers to one ADSP record per lookup. o Update security section w/ language from W. Venema o Simplify imports of terms from other RFCs, add Local-part, 4234 -> 5234. o Add usage example appendix. o Add IANA considerations. o Update authors list D.7. Changes since -ietf-dkim-ssp-01 o Reworded introduction for clarity. o Various definition clarifications. o Changed names of practices to unknown, all, and discardable. o Removed normative language mandating use of SSP in particular situations (issue 1538). o Clarified possible confusion over handling of syntax errors. o Removed normative language from Introduction (issue 1538). o Changed "Originator" to "Author" throughout (issue 1529). o Removed all references to Third-Party Signatures (issues 1512, 1521). o Removed all mention of "Suspicious" (issues 1528, 1530). o Removed "t=y" (testing) flag (issue 1540). o Removed "handling" tag (issue 1513). Allman, et al. Expires June 20, 2009 [Page 19] Internet-Draft ADSP December 2008 o Broke up the "Sender Signing Practices Check Procedure" into two algorithms: fetching the SSP record and interpretation thereof (issues 1531, 1535; partially addresses issue 1520). Interpretation is now the responsibility of the Evaluator. o Document restructuring for better flow and remove redundancies (some may address issue 1523, but I'm not sure I understand that issue completely; also issues 1532, 1537). o Removed all mention of how this interacts with users, even though it makes parts of the document harder to understand (issue 1526). o Introduced the concepts of "SSP Checker" and "Evaluator". o Multiple author case now handled my separate invocations of SSP checker by Evaluator (issue 1525). o Removed check to avoid querying top-level domains. o Changed ABNF use of whitespace from [FWS] to *WSP (partially addresses issue 1543). D.8. Changes since -ietf-dkim-ssp-00 o Clarified Operation Overview and eliminated use of Legitimate as the counterpart of Suspicious since the words have different meanings. o Improved discussion (courtesy of Arvel Hathcock) of the use of TXT records in DNS vs. a new RR type. o Clarified publication rules for multilevel names. o Better description of overall record syntax, in particular that records with unknown tags are considered syntactically correct. o Clarified Sender Signing Practices Check Procedure, primarily by use of new term Author Domain. o Eliminated section "Third-Party Signatures and Mailing Lists" that is better included in the DKIM overview document. o Added "handling" tag to express alleged sending domain's preference about handling of Suspicious messages. o Clarified handling of SERVFAIL error in SSP check. Allman, et al. Expires June 20, 2009 [Page 20] Internet-Draft ADSP December 2008 o Replaced "entity" with "domain", since with the removal of user- granularity SSP, the only entities having sender signing policies are domains. D.9. Changes since -allman-ssp-02 o Removed user-granularity SSP and u= tag. o Replaced DKIMP resource record with a TXT record. o Changed name of the primary tag from "p" to "dkim". o Replaced lookup algorithm with one which traverses upward at most one level. o Added description of records to be published, and effect of wildcard records within the domain, on SSP. D.10. Changes since -allman-ssp-01 o Changed term "Sender Signing Policy" to "Sender Signing Practices". o Changed query methodology to use a separate DNS resource record type, DKIMP. o Changed tag values from SPF-like symbols to words. o User level policies now default to that of the domain if not specified. o Removed the "Compliance" section since we're still not clear on what goes here. o Changed the "parent domain" policy to only search up one level (assumes that subdomains will publish SSP records if appropriate). o Added detailed description of SSP check procedure. D.11. Changes since -allman-ssp-00 From a "diff" perspective, the changes are extensive. Semantically, the changes are: o Added section on "Third-Party Signatures and Mailing Lists" o Added "Compliance" (transferred from -base document). I'm not clear on what needs to be done here. Allman, et al. Expires June 20, 2009 [Page 21] Internet-Draft ADSP December 2008 o Extensive restructuring. Authors' Addresses Eric Allman Sendmail, Inc. 6475 Christie Ave, Suite 350 Emeryville, CA 94608 Phone: +1 510 594 5501 Email: eric+dkim@sendmail.org Jim Fenton Cisco Systems, Inc. MS SJ-9/2 170 W. Tasman Drive San Jose, CA 95134-1706 Phone: +1 408 526 5914 Email: fenton@cisco.com Mark Delany Yahoo! Inc. 701 First Avenue Sunnyvale, CA 94089 Phone: +1 408 349 6831 Email: markd+dkim@yahoo-inc.com John Levine Taughannock Networks PO Box 727 Trumansburg, NY 14886 Phone: +1 831 480 2300 Email: standards@taugh.com URI: http://www.taugh.com Allman, et al. Expires June 20, 2009 [Page 22] Internet-Draft ADSP December 2008 Full Copyright Statement Copyright (C) The IETF Trust (2008). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Allman, et al. Expires June 20, 2009 [Page 23]