INTERNET-DRAFT Donald E. Eastlake 3rd UPDATES RFC 2845 Motorola Laboratories Expires: August 2005 February 2005 HMAC SHA TSIG Algorithm Identifiers ---- --- ---- --------- ----------- Status of This Document By submitting this Internet-Draft, I certify that any applicable patent or other IPR claims of which I am aware have been disclosed, or will be disclosed, and any of which I become aware will be disclosed, in accordance with RFC 3668. This draft is intended to be become a Proposed Standard RFC. Distribution of this document is unlimited. Comments should be sent to the DNSEXT working group mailing list . Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than a "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/1id-abstracts.html The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html Abstract Use of the TSIG DNS resource record requires specification of a cryptographic message authentication code. Currently identifiers have been specified only for the HMAC-MD5 and GSS TSIG algorithms. This document standardizes identifiers and implementation requirements for additional HMAC SHA TSIG algorithms and standardizes how to specify the truncation of HMAC values. Copyright Notice Copyright (C) The Internet Society 2005. All Rights Reserved. D. Eastlake 3rd [Page 1] INTERNET-DRAFT HMAC-SHA TSIG Identifiers Table of Contents Status of This Document....................................1 Abstract...................................................1 Copyright Notice...........................................1 Table of Contents..........................................2 1. Introduction............................................3 2. Algorithms and Identifiers..............................4 3. Specifying Truncation...................................5 4. IANA Considerations.....................................6 5. Security Considerations.................................6 6. Copyright and Disclaimer................................6 7. Normative References....................................7 8. Informative References..................................7 Author's Address...........................................8 Expiration and File Name...................................8 D. Eastlake 3rd [Page 2] INTERNET-DRAFT HMAC-SHA TSIG Identifiers 1. Introduction [RFC 2845] specifies a TSIG Resource Record (RR) that can be used to authenticate DNS queries and responses. This RR contains a domain name syntax data item which names the authentication algorithm used. [RFC 2845] defines the HMAC-MD5.SIG-ALG.REG.INT name for authentication codes using the HMAC [RFC 2104] algorithm with the MD5 [RFC 1321] hash algorithm. IANA has also registered "gss-tsig" as an identifier for TSIG authentication where the cryptographic operations are delegated to GSS [RFC 3645]. In section 2, this document specifies additional names for TSIG authentication algorithms based on US NIST SHA algorithms and HMAC and specifies the implementation requirements for those algorithms. In section 3, this document specifies the meaning of inequality between the normal output size of the specified hash function and the length of MAC (message authentication code) data given in the TSIG RR. In particular, it specifies that a shorter length field value specifies truncation and a longer length field is an error. D. Eastlake 3rd [Page 3] INTERNET-DRAFT HMAC-SHA TSIG Identifiers 2. Algorithms and Identifiers TSIG Resource Records (RRs) [RFC 2845] are used to authenticate DNS queries and responses. They are intended to be efficient symmetric authentication codes based on a shared secret. (Asymmetric signatures can be provided using the SIG RR [RFC 2931]. In particular, SIG(0) can be used for transaction signatures.) Used with a strong hash function, HMAC [RFC 2104] provides a way to calculate such symmetric authentication codes. The only specified HMAC based TSIG algorithm identifier has been HMAC-MD5.SIG-ALG.REG.INT based on MD5 [RFC 1321]. The use of SHA-1 [FIPS 180-1, RFC 3174], which is a 160 bit hash, as compared with the 128 bits for MD5, and additional hash algorithms in the SHA family [FIPS 180-2, RFC 3874] with 224, 256, 384, and 512 bits, may be preferred in some case particularly since increasingly successful cryptanalytic attacks are being made on the shorter hashes. Use of TSIG between a DNS resolver and server is by mutual agreement. That agreement can include the support of additional algorithms and may specify policies as to which algorithms are acceptable. The current HMAC-MD5.SIG-ALG.REG.INT identifier is included in the table below for convenience. Implementations which support TSIG MUST also implement HMAC SHA1 and HMAC SHA256 and MAY implement gss-tsig and the other algorithms listed below. Mandatory HMAC-MD5.SIG-ALG.REG.INT Mandatory hmac-sha1 Optional hmac-sha224 Mandatory hmac-sha256 Optional hamc-sha384 Optional hmac-sha512 D. Eastlake 3rd [Page 4] INTERNET-DRAFT HMAC-SHA TSIG Identifiers 3. Specifying Truncation In some cases, it is reasonable to truncate the output of HMAC and use the truncated value for authentication. HMAC SHA-1 truncated to 96 bits is an optional available in several IETF protocols including IPSEC and TLS. The TSIG RR [RFC 2845] includes a "MAC size" field, which gives the size of the MAC field in octets. But [RFC 2845] does not specify what to do if this MAC size differs from the length of the output of HMAC for a particular hash function. The specification for TSIG handling is changed as follows: 1. If The "MAC size" field is larger than the HMAC output length or is zero: This case MUST NOT be generated and if received MUST cause the packet to be dropped and RCODE 1 (FORMERR) to be returned. 2. If the "MAC size" field equals the HMAC output length: Operation is as described in [RFC 2845]. 3. If the "MAC size" field is less than the HMAC output length but is not zero: This is sent when the signer has truncated the HMAC output as described in RFC 2104, taking initial octets and discarding trailing octets. TSIG truncation can only be to an integral number of octets. On receipt of a packet with truncation thus indicated, the locally calculated MAC is similarly truncated and only the truncated values compared for authentication. TSIG implementations SHOULD implement SHA-1 truncated to 96 bits (12 octets) and MAY implement any or all other truncations valid under case 3 above. D. Eastlake 3rd [Page 5] INTERNET-DRAFT HMAC-SHA TSIG Identifiers 4. IANA Considerations This document, on approval for publication as a standards track RFC, registers the new TSIG algorithm identifiers listed in Section 2 with IANA. 5. Security Considerations For all of the message authentication code algorithms listed herein, those producing longer values are believed to be stronger; however, while there are some arguments that mild truncation can strengthen a MAC by reducing the information available to an attacker, excessive truncation clearly weakens authentication by reducing the number of bits an attacker has to try to force. See [RFC 2104] which recommends that an HMAC never be truncated to less than half its length nor to less than 80 bits (10 octets). Significant progress has been made recently in cryptanalysis of hash function of the type used herein. While the results so far should not effect HMAC, the stronger SHA-1 and SHA-256 algorithms are being made mandatory due to caution. See also the Security Considerations section of [RFC 2845]. 6. Copyright and Disclaimer Copyright (C) The Internet Society 2005. This document is subject to the rights, licenses and restrictions contained in BCP 78 and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. D. Eastlake 3rd [Page 6] INTERNET-DRAFT HMAC-SHA TSIG Identifiers 7. Normative References [FIPS 180-2] - "Secure Hash Standard", (SHA-1/224/256/384/512) US Federal Information Processing Standard, with Change Notice 1, February 2004. [RFC 1321] - Rivest, R., "The MD5 Message-Digest Algorithm ", RFC 1321, April 1992. [RFC 2104] - Krawczyk, H., Bellare, M., and R. Canetti, "HMAC: Keyed- Hashing for Message Authentication", RFC 2104, February 1997. [RFC 2434] - Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 2434, October 1998. [RFC 2845] - Vixie, P., Gudmundsson, O., Eastlake 3rd, D., and B. Wellington, "Secret Key Transaction Authentication for DNS (TSIG)", RFC 2845, May 2000. 8. Informative References. [RFC 2931] - Eastlake 3rd, D., "DNS Request and Transaction Signatures ( SIG(0)s )", RFC 2931, September 2000. [RFC 3174] - Eastlake 3rd, D. and P. Jones, "US Secure Hash Algorithm 1 (SHA1)", RFC 3174, September 2001. [RFC 3645] - Kwan, S., Garg, P., Gilroy, J., Esibov, L., Westhead, J., and R. Hall, "Generic Security Service Algorithm for Secret Key Transaction Authentication for DNS (GSS-TSIG)", RFC 3645, October 2003. [RFC 3874] - "A 224-bit One-way Hash Function: SHA-224", R. Housley, September 2004, D. Eastlake 3rd [Page 7] INTERNET-DRAFT HMAC-SHA TSIG Identifiers Author's Address Donald E. Eastlake 3rd Motorola Laboratories 155 Beaver Street Milford, MA 01757 USA Telephone: +1-508-786-7554 (w) +1-508-634-2066 (h) EMail: Donald.Eastlake@motorola.com Expiration and File Name This draft expires in August 2005. Its file name is draft-ietf-dnsext-tsig-sha-01.txt D. Eastlake 3rd [Page 8]