IETF PKIX WG Sean Turner, IECA Internet Draft Daniel Brown, Certicom Intended Status: Standard Track Kelvin Yiu, Microsoft Updates: 3279 (once approved) Russ Housley, Vigil Security Expires: June 11, 2009 Tim Polk, NIST December 11, 2008 Elliptic Curve Cryptography Subject Public Key Information draft-ietf-pkix-ecc-subpubkeyinfo-11.txt Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html This Internet-Draft will expire on June 11, 2009. Copyright Notice Copyright (C) The IETF Trust (2008). Abstract This document specifies the syntax and semantics for the Subject Public Key Information field in certificates that support Elliptic Curve Cryptography. This document updates Sections 2.3.5 and 5, and the ASN.1 module of Algorithms and Identifiers for the Internet X.509 Turner, et al Expires June 11, 2009 [Page 1] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile, RFC 3279. Table of Contents 1. Introduction...................................................2 1.1. Terminology...............................................3 2. Subject Public Key Information Fields..........................3 2.1. Elliptic Curve Cryptography Public Key Algorithm Identifiers...............................................4 2.2. Subject Public Key........................................7 3. Key Usage Bits.................................................8 4. Security Considerations........................................9 5. ASN.1 Considerations..........................................11 6. IANA Considerations...........................................11 7. Acknowledgments...............................................12 8. References....................................................12 8.1. Normative References.....................................12 8.2. Informative References...................................13 Appendix A. ASN.1 Module.........................................13 1. Introduction This document specifies the format of the subjectPublicKeyInfo field in X.509 certificates [PKI] that use Elliptic Curve Cryptography (ECC). It updates RFC 3279 [PKI-ALG]. This document specifies the encoding formats for public keys used with the following ECC algorithms: o Elliptic Curve Digital Signature Algorithm (ECDSA); o Elliptic Curve Diffie-Hellman (ECDH) family schemes; and o Elliptic Curve Menezes-Qu-Vanstone (ECMQV) family schemes. Two methods for specifying the algorithms that can be used with the subjectPublicKey are defined. One method does not restrict the algorithms the key can be used with while the other method does restrict the algorithms the key can be used with. To promote interoperability, this document indicates which is required to implement for Certification Authorities (CAs) that implement ECC algorithms and relying parties that claim to process ECC algorithms. The ASN.1 module in this document includes ASN.1 for ECC algorithms. It also includes ASN.1 for non-ECC algorithms defined in [PKI-ALG] and [PKI-ADALG] even though the associated text is unaffected. By Turner, et al Expires June 11, 2009 [Page 2] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 updating all of the ASN.1 from [PKI-ALG] in this document, implementers only need to use the module found in this document. 1.1. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [MUSTSHOULD]. 2. Subject Public Key Information Fields In the X.509 certificate, the subjectPublicKeyInfo field has the SubjectPublicKeyInfo type, which has the following ASN.1 syntax: SubjectPublicKeyInfo ::= SEQUENCE { algorithm AlgorithmIdentifier, subjectPublicKey BIT STRING } The fields in SubjectPublicKeyInfo have the following meanings: o algorithm is the algorithm identifier and parameters for the ECC public key. o subjectPublicKey is the ECC public key. See Section 2.2. The AlgorithmIdentifier type, which is included for convenience [PKI], is defined as follows: AlgorithmIdentifier ::= SEQUENCE { algorithm OBJECT IDENTIFIER, parameters ANY DEFINED BY algorithm OPTIONAL } The fields in AlgorithmIdentifier have the following meanings: o algorithm identifies the cryptographic algorithm with an object identifier. See Section 2.1. o parameters, which are optional, are the associated parameters for the algorithm identifier in the algorithm field. See Section 2.1.1. Turner, et al Expires June 11, 2009 [Page 3] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 2.1. Elliptic Curve Cryptography Public Key Algorithm Identifiers The algorithm field in the SubjectPublicKeyInfo structure [PKI] indicates the algorithm and any associated parameters for the ECC public key (see Section 2.2). Three algorithm identifiers are defined in this document: o id-ecPublicKey indicates that the algorithms that can be used with the subject public key is unrestricted. The key is only restricted by the values indicated in the key usage certificate extension (see Section 3). id-ecPublicKey MUST be supported. See Section 2.1.1. This value is also included in certificates when a public key is used with ECDSA. o id-ecDH indicates that the algorithm that can be used with the subject public key is restricted to the Elliptic Curve Diffie- Hellman algorithm. See Section 2.1.2. id-ecDH MAY be supported. o id-ecMQV indicates that the algorithm that can be used with the subject public key is restricted to the Elliptic Curve Menezes- Qu-Vanstone key agreement algorithm. See Section 2.1.2. id- ecMQV MAY be supported. 2.1.1. Unrestricted Algorithm Identifier and Parameters The "unrestricted" algorithm identifier is: id-ecPublicKey OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) ansi-X9-62(10045) keyType(2) 1 } The public key (ECPoint) syntax is described in Section 2.2. The parameter for id-ecPublicKey is as follows and MUST always be present: ECParameters ::= CHOICE { namedCurve OBJECT IDENTIFIER -- implicitCurve NULL -- specifiedCurve SpecifiedECDomain } -- implicitCurve and specifiedCurve MUST NOT be used in PKIX. -- Details for SpecifiedECDomain can be found in [X9.62]. -- Any future additions to this CHOICE should be coordinated -- with ANSI X9. Turner, et al Expires June 11, 2009 [Page 4] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 The fields in ECParameters have the following meanings: o namedCurve identifies all the required values for a particular set of elliptic curve domain parameters to be represented by an object identifier. This choice MUST be supported. See Section 2.1.1.1. o implicitCurve allows the elliptic curve domain parameters to be inherited. This choice MUST NOT be used. o specifiedCurve, which is of type SpecifiedECDomain type (defined in [X9.62]), allows all of the elliptic curve domain parameters to be explicitly specified. This choice MUST NOT be used. See the ASN.1 Considerations section. The addition of any new choices in ECParameters needs to be coordinated with ANSI X9. The AlgorithmIdentifier within subjectPublicKeyInfo is the only place within a certificate where the elliptic curve domain parameters may be located. If the elliptic curve domain parameters are not present, then clients MUST reject the certificate. 2.1.1.1. Named Curve The namedCurve field in ECParameters uses object identifiers to name well known curves. This document publishes curve identifiers for the fifteen NIST recommended curves [FIPS186-3]. Other documents can publish other name curve identifiers. The NIST named curves are: -- Note that in [X9.62] the curves are referred to as 'ansiX9' as -- opposed to 'sec'. For example secp192r1 is the same curve as -- ansix9p192r1. -- Note that in [PKI-ALG] the secp192r1 curve was referred to as -- prime192v1 and the secp256r1 curve was referred to as -- prime256v1. -- Note that [FIPS186-3] refers to secp192r1 as P-192, secp224r1 as -- P-224, secp256r1 as P-256, secp384r1 as P-384, and secp521r1 as -- P-521. secp192r1 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) ansi-X9-62(10045) curves(3) prime(1) 1 } Turner, et al Expires June 11, 2009 [Page 5] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 sect163k1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 1 } sect163r2 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 15 } secp224r1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 33 } sect233k1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 26 } sect233r1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 27 } secp256r1 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) ansi-X9-62(10045) curves(3) prime(1) 7 } sect283k1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 16 } sect283r1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 17 } secp384r1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 34 } sect409k1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 36 } sect409r1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 37 } secp521r1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 35 } sect571k1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 38 } sect571r1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 39 } 2.1.2. Restricted Algorithm Identifiers and Parameters Two "restricted" algorithms are defined for key agreement algorithms: the Elliptic Curve Diffie-Hellman (ECDH) key agreement family schemes Turner, et al Expires June 11, 2009 [Page 6] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 and the Elliptic Curve Menezes-Qu-Vanstone (ECMQV) key agreement family schemes. Both algorithms are identified by an object identifier and have parameters. The object identifier varies based on the algorithm but the parameters are always ECParameters and they MUST always be present (see Section 2.1.1). The ECDH algorithm uses the following object identifier: id-ecDH OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) schemes(1) ecdh(12) } The ECMQV algorithm uses the following object identifier: id-ecMQV OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) schemes(1) ecmqv(13) } 2.2. Subject Public Key The subjectPublicKey from SubjectPublicKeyInfo is the ECC public key. ECC public keys have the following syntax: ECPoint ::= OCTET STRING Implementations of elliptic curve cryptography according to this document MUST support the uncompressed form and MAY support the compressed form of the ECC public key. The hybrid form of the ECC public key from [X9.62] MUST NOT be used. As specified in [SEC1]: o The elliptic curve public key (a value of type ECPoint which is an OCTET STRING) is mapped to a subjectPublicKey (a value of type BIT STRING) as follows: the most significant bit of the OCTET STRING value becomes the most significant bit of the BIT STRING value, and so on; the least significant bit of the OCTET STRING becomes the least significant bit of the BIT STRING. Conversion routines are found in Sections 2.3.1 and 2.3.2 of [SEC1]. o The first octet of the OCTET STRING indicates whether the key is compressed or uncompressed. The uncompressed form is indicated by 0x04 and the compressed form is indicated by either 0x02 or 0x03 (see 2.3.3 in [SEC1]). The public key MUST be rejected if any other value is included in the first octet. Turner, et al Expires June 11, 2009 [Page 7] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 3. Key Usage Bits If the keyUsage extension is present in a Certification Authority (CA) certificate that indicates id-ecPublicKey in subjectPublicKeyInfo, then any combination of the following values MAY be present: digitalSignature; nonRepudiation; keyAgreement; keyCertSign; and cRLSign. If the CA certificate keyUsage extension asserts keyAgreement, then it MAY assert either encipherOnly or decipherOnly. However, this specification RECOMMENDS that if keyCertSign or cRLSign is present, then keyAgreement, encipherOnly, and decipherOnly SHOULD NOT be present. If the keyUsage extension is present in an End Entity (EE) certificate that indicates id-ecPublicKey in subjectPublicKeyInfo, then any combination of the following values MAY be present: digitalSignature; nonRepudiation; and keyAgreement. If the EE certificate keyUsage extension asserts keyAgreement, then it MAY assert either encipherOnly or decipherOnly. If the keyUsage extension is present in a certificate that indicates id-ecDH or id-ecMQV in subjectPublicKeyInfo, then the following MUST be present: keyAgreement; one of the following MAY be present: encipherOnly; or decipherOnly. If the keyUsage extension is present in a certificate that indicates id-ecDH or id-ecMQV in subjectPublicKeyInfo, then the following values MUST NOT be present: digitalSignature; nonRepudiation; Turner, et al Expires June 11, 2009 [Page 8] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 keyTransport; keyCertSign; and cRLSign. 4. Security Considerations The security considerations in [PKI-ALG] apply. When implementing ECC in X.509 Certificates and Certificate Revocation Lists (CRLs), there are three algorithm related choices that need to be made for the signatureAlgorithm field in a Certificate: 1) What is the public key size? 2) What is the hash algorithm [FIPS180-3]? 3) What is the curve? Consideration must be given by the CA to the strength of the security provided by each of these choices. Security is measured in bits, where a strong symmetric cipher with a key of X bits is said to provide X bits of security. It is recommended that the bits of security provided by each choice are roughly equivalent. The following table provides comparable minimum bits of security [SP800- 57] for the ECDSA key sizes and message digest algorithms. It also lists curves (see Section 2.1.1.1) for the key sizes. Turner, et al Expires June 11, 2009 [Page 9] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 Minimum | ECDSA | Message | Curves Bits of | Key Size | Digest | Security | | Algorithms | ---------+----------+------------+----------- 80 | 160-223 | SHA-1 | sect163k1 | | SHA-224 | secp163r2 | | SHA-256 | secp192r1 | | SHA-384 | | | SHA-512 | ---------+----------+------------+----------- 112 | 224-255 | SHA-224 | secp224r1 | | SHA-256 | sect233k1 | | SHA-384 | sect233r1 | | SHA-512 | ---------+----------+------------+----------- 128 | 256-383 | SHA-256 | secp256r1 | | SHA-384 | sect283k1 | | SHA-512 | sect283r1 ---------+----------+------------+----------- 192 | 384-511 | SHA-384 | secp384r1 | | SHA-512 | sect409k1 | | | sect409r1 ---------+----------+------------+----------- 256 | 512+ | SHA-512 | secp521r1 | | | sect571k1 | | | sect571r1 ---------+----------+------------+----------- To promote interoperability, the following choices are RECOMMENDED: Minimum | ECDSA | Message | Curves Bits of | Key Size | Digest | Security | | Algorithms | ---------+----------+------------+----------- 80 | 192 | SHA-256 | secp192r1 ---------+----------+------------+----------- 112 | 224 | SHA-256 | secp224r1 ---------+----------+------------+----------- 128 | 256 | SHA-256 | secp256r1 ---------+----------+------------+----------- 192 | 384 | SHA-384 | secp384r1 ---------+----------+------------+----------- 256 | 512 | SHA-512 | secp521r1 ---------+----------+------------+----------- Using a larger hash value and then truncating it, consumes more processing power than is necessary. This is more important on Turner, et al Expires June 11, 2009 [Page 10] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 constrained devices. Since the signer does not know the environment that the recipient will use to validate the signature, it is better to use a hash function that provides the desired hash value output size, and no more. There are security risks with using keys not associated with well known and widely reviewed curves. For example, the curve may not satisfy the Menezes-Okamoto-Vanstone (MOV) condition [X9.62] or the curve may be vulnerable to the Anomalous attack [X9.62]. Additionally, either a) all of the arithmetic properties of a candidate ECC public key must be validated to ensure that it has the unique correct representation in the correct (additive) subgroup (and therefore is also in the correct EC group) specified by the associated ECC domain parameters or b) some of the arithmetic properties of a candidate ECC public key must be validated to ensure that it is in the correct group (but not necessarily the correct subgroup) specified by the associated ECC domain parameters [SP800- 56A]. As noted in [PKI-ALG], the use of MD2 and MD5 for new applications is discouraged. It is still reasonable to use MD2 and MD5 to verify existing signatures. 5. ASN.1 Considerations [X9.62] defines additional options for ECParameters and ECDSA-Sig- Value [PKI-ALG]. If an implementation needs to use these options, then use the [X9.62] ASN.1 module. This RFC contains a conformant subset of the ASN.1 module defined in [X9.62]. If an implementation generates a PER [X.691] encoding using the ASN.1 module found in this specification, it might not achieve the same encoded output as one that uses the [X9.62] module. PER is not required by either the PKIX or S/MIME environments. If an implementation environment requires PER, then implementation concerns are less likely with the use of the [X9.62] module. 6. IANA Considerations This document makes extensive use of object identifiers to register public key types, elliptic curves, and algorithms. Most are registered in the ANSI X9.62 arc with the exception of the hash algorithms, which are in NIST arc, and many of the curves, which are in the Certicom Inc. arc (these curves have been adopted by ANSI and NIST). Additionally, an object identifier is used to identify the ASN.1 module found in Appendix A. It is defined in an arc delegated Turner, et al Expires June 11, 2009 [Page 11] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 by IANA to the PKIX Working Group. No further action by IANA is necessary for this document or any anticipated updates. 7. Acknowledgments The authors wish to thank Stephen Farrell, Alfred Hoenes, Johannes Merkle, Jim Schaad, and Carl Wallace for their valued input. 8. References 8.1. Normative References [FIPS180-3] National Institute of Standards and Technology (NIST), FIPS Publication 180-3: Secure Hash Standard, October 2008. [FIPS186-3] National Institute of Standards and Technology (NIST), FIPS Publication 186-3: Digital Signature Standard, (draft) November 2008. [PKI] Cooper, D., Santesson, S., Farrell, S., Boeyen, S. Housley, R., and W. Polk, "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 5280, May 2008. [PKI-ALG] Polk, W., Housley, R. and L. Bassham, "Algorithm Identifiers for the Internet X.509 Public Key Infrastructure", RFC 3279, April 2002. [MUSTSHOULD] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RSAOAEP] Schaad, J., Kaliski, B., and R. Housley, "Additional Algorithms and Identifiers for RSA Cryptography for use in the Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 4055, June 2005. [SEC1] Standards for Efficient Cryptography Group (SECG), "SEC 1: Elliptic Curve Cryptography", Version 1.0, September 2000. [X9.62] American National Standards Institute (ANSI), ANS X9.62-2005: The Elliptic Curve Digital Signature Algorithm (ECDSA), 2005. Turner, et al Expires June 11, 2009 [Page 12] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 [X.680] ITU-T Recommendation X.680 (2002) | ISO/IEC 8824- 1:2002. Information Technology - Abstract Syntax Notation One. 8.2. Informative References [PKI-ADALG] Dang, Q., Santesson, S., Moriarty, K., Brown, D., and T. Polk, "Internet X.509 Public Key Infrastructure: Additional Algorithms and Identifiers for DSA and ECDSA", draft-ietf-pkix-sha2-dsa-ecdsa-05.txt, work-in- progress, October 2008. [SP800-56A] National Institute of Standards and Technology (NIST), Special Publication 800-56A: Recommendation for Pair- Wise Key Establishment Schemes Using Discrete Logarithm Cryptography (Revised), March 2007. [SP800-57] National Institute of Standards and Technology (NIST), Special Publication 800-57: Recommendation for Key Management - Part 1 (Revised), March 2007. [X.691] ITU-T Recommendation X.691 (2002) | ISO/IEC 8825- 2:2002. Information Technology - ASN.1 Encoding Rules: Specification of Packed Encoding Rules. Appendix A. ASN.1 Module NOTE: The value for TBA1 will be included during AUTH48. //** RFC Editor: Remove this note prior to publication **// PKIX1Algorithms2008 { iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) TBA1 } DEFINITIONS EXPLICIT TAGS ::= BEGIN -- EXPORTS ALL; Turner, et al Expires June 11, 2009 [Page 13] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 IMPORTS -- From RFC 4055 [RSAOAEP] id-sha224, id-sha256, id-sha384, id-sha512 FROM PKIX1-PSS-OAEP-Algorithms { iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-pkix1-rsa-pkalgs(33) } ; -- -- Message Digest Algorithms -- -- MD-2 -- Parameters are NULL id-md2 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) digestAlgorithm(2) 2 } -- MD-5 -- Parameters are NULL id-md5 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549)digestAlgorithm(2) 5 } -- SHA-1 -- Parameters are preferred absent id-sha1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) oiw(14) secsig(3) algorithm(2) 26 } -- SHA-224 -- Parameters are preferred absent -- id-sha224 OBJECT IDENTIFIER ::= { -- joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) -- csor(3) nistalgorithm(4) hashalgs(2) 4 } Turner, et al Expires June 11, 2009 [Page 14] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 -- SHA-256 -- Parameters are preferred absent -- id-sha256 OBJECT IDENTIFIER ::= { -- joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) -- csor(3) nistalgorithm(4) hashalgs(2) 1 } -- SHA-384 -- Parameters are preferred absent -- id-sha384 OBJECT IDENTIFIER ::= { -- joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) -- csor(3) nistalgorithm(4) hashalgs(2) 2 } -- SHA-512 -- Parameters are preferred absent -- id-sha512 OBJECT IDENTIFIER ::= { -- joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) -- csor(3) nistalgorithm(4) hashalgs(2) 3 } -- -- Public Key (PK) Algorithms -- -- RSA PK Algorithm and Key rsaEncryption OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-1(1) 1 } RSAPublicKey ::= SEQUENCE { modulus INTEGER, -- n publicExponent INTEGER -- e } -- DSA PK Algorithm, Key, and Parameters id-dsa OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) x9-57(10040) x9algorithm(4) 1 } DSAPublicKey ::= INTEGER -- public key, y DSS-Parms ::= SEQUENCE { p INTEGER, q INTEGER, g INTEGER } Turner, et al Expires June 11, 2009 [Page 15] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 -- Diffie-Hellman PK Algorithm, Key, and Parameters dhpublicnumber OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) ansi-x942(10046) number-type(2) 1 } DHPublicKey ::= INTEGER -- public key, y = g^x mod p DomainParameters ::= SEQUENCE { p INTEGER, -- odd prime, p=jq +1 g INTEGER, -- generator, g q INTEGER, -- factor of p-1 j INTEGER OPTIONAL, -- subgroup factor, j>= 2 validationParms ValidationParms OPTIONAL } ValidationParms ::= SEQUENCE { seed BIT STRING, pgenCounter INTEGER } -- KEA PK Algorithm and Parameters id-keyExchangeAlgorithm OBJECT IDENTIFIER ::= { 2 16 840 1 101 2 1 1 22 } KEA-Parms-Id ::= OCTET STRING -- Sec 2.1.1 Unrestricted Algorithm ID, Key, and Parameters -- (ECDSA keys use id-ecPublicKey) id-ecPublicKey OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) ansi-X9-62(10045) keyType(2) 1 } ECPoint ::= OCTET STRING -- Parameters for both Restricted and Unrestricted ECParameters ::= CHOICE { namedCurve OBJECT IDENTIFIER -- implicitCurve NULL -- specifiedCurve SpecifiedECDomain } -- implicitCurve and specifiedCurve MUST NOT be used in PKIX. -- Details for SpecifiedECDomain can be found in [X9.62]. -- Any future additions to this CHOICE should be coordinated -- with ANSI X9. Turner, et al Expires June 11, 2009 [Page 16] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 -- Sec 2.1.2 Restricted Algorithm IDs, Key, and Parameters: ECDH id-ecDH OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) schemes(1) ecdh(12) } -- ECPoint ::= OCTET STRING -- Parameters are ECParameters. -- Sec 2.1.2 Restricted Algorithm IDs, Key, and Parameters: ECMQV id-ecMQV OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) schemes(1) ecmqv(13) } -- ECPoint ::= OCTET STRING -- Parameters are ECParameters. -- -- Signature Algorithms -- -- RSA with MD-2 -- Parameters are NULL md2WithRSAEncryption OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-1(1) 2 } -- RSA with MD-5 -- Parameters are NULL md5WithRSAEncryption OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-1(1) 4 } -- RSA with SHA-1 -- Parameters are NULL sha1WithRSAEncryption OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-1(1) 5 } -- DSA with SHA-1 -- Parameters are ABSENT id-dsa-with-sha1 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) x9-57(10040) x9algorithm(4) 3 } Turner, et al Expires June 11, 2009 [Page 17] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 -- DSA with SHA-224 -- Parameters are ABSENT id-dsa-with-sha224 OBJECT IDENTIFIER ::= { joint-iso-ccitt(2) country(16) us(840) organization(1) gov(101) csor(3) algorithms(4) id-dsa-with-sha2(3) 1 } -- DSA with SHA-256 -- Parameters are ABSENT id-dsa-with-sha256 OBJECT IDENTIFIER ::= { joint-iso-ccitt(2) country(16) us(840) organization(1) gov(101) csor(3) algorithms(4) id-dsa-with-sha2(3) 2 } -- ECDSA with SHA-1 -- Parameters are ABSENT ecdsa-with-SHA1 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) ansi-X9-62(10045) signatures(4) 1 } -- ECDSA with SHA-224 -- Parameters are ABSENT ecdsa-with-SHA224 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) ansi-X9-62(10045) signatures(4) ecdsa-with-SHA2(3) 1 } -- ECDSA with SHA-256 -- Parameters are ABSENT ecdsa-with-SHA256 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) ansi-X9-62(10045) signatures(4) ecdsa-with-SHA2(3) 2 } -- ECDSA with SHA-384 -- Parameters are ABSENT ecdsa-with-SHA384 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) ansi-X9-62(10045) signatures(4) ecdsa-with-SHA2(3) 3 } -- ECDSA with SHA-512 -- Parameters are ABSENT ecdsa-with-SHA512 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) ansi-X9-62(10045) signatures(4) ecdsa-with-SHA2(3) 4 } Turner, et al Expires June 11, 2009 [Page 18] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 -- -- Signature Values -- -- DSA DSA-Sig-Value ::= SEQUENCE { r INTEGER, s INTEGER } -- ECDSA ECDSA-Sig-Value ::= SEQUENCE { r INTEGER, s INTEGER } -- -- Named Elliptic Curves -- -- Note that in [X9.62] the curves are referred to as 'ansiX9' as -- opposed to 'sec'. For example secp192r1 is the same curve as -- ansix9p192r1. -- Note that in [PKI-ALG] the secp192r1 curve was referred to as -- prime192v1 and the secp256r1 curve was referred to as prime256v1. -- Note that [FIPS186-3] refers to secp192r1 as P-192, secp224r1 as -- P-224, secp256r1 as P-256, secp384r1 as P-384, and secp521r1 as -- P-521. secp192r1 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) ansi-X9-62(10045) curves(3) prime(1) 1 } sect163k1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 1 } sect163r2 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 15 } secp224r1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 33 } Turner, et al Expires June 11, 2009 [Page 19] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 sect233k1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 26 } sect233r1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 27 } secp256r1 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) ansi-X9-62(10045) curves(3) prime(1) 7 } sect283k1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 16 } sect283r1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 17 } secp384r1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 34 } sect409k1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 36 } sect409r1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 37 } secp521r1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 35 } sect571k1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 38 } sect571r1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) certicom(132) curve(0) 39 } END Turner, et al Expires June 11, 2009 [Page 20] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 Authors' Addresses Sean Turner IECA, Inc. 3057 Nutley Street, Suite 106 Fairfax, VA 22031 USA EMail: turners@ieca.com Kelvin Yiu Microsoft One Microsoft Way Redmond, WA 98052-6399 USA Email: kelviny@microsoft.com Daniel R. L. Brown Certicom Corp 5520 Explorer Drive #400 Mississauga, ON L4W 5L1 CANADA EMail: dbrown@certicom.com Russ Housley Vigil Security, LLC 918 Spring Knoll Drive Herndon, VA 20170 USA EMail: housley@vigilsec.com Tim Polk NIST Building 820, Room 426 Gaithersburg, MD 20899 USA EMail: wpolk@nist.gov Turner, et al Expires June 11, 2009 [Page 21] Internet-Draft ECC SubjectPublicKeyInfo Format November 2008 Full Copyright Statement Copyright (C) The IETF Trust (2008). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Acknowledgment Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA). Turner, et al Expires June 11, 2009 [Page 22]