Internet DRAFT - draft-ietf-dnsop-serve-stale

draft-ietf-dnsop-serve-stale







DNSOP Working Group                                          D. Lawrence
Internet-Draft                                                    Oracle
Updates: 1034, 1035, 2181 (if approved)                        W. Kumari
Intended status: Standards Track                                 P. Sood
Expires: June 11, 2020                                            Google
                                                       December 09, 2019


              Serving Stale Data to Improve DNS Resiliency
                    draft-ietf-dnsop-serve-stale-10

Abstract

   This draft defines a method (serve-stale) for recursive resolvers to
   use stale DNS data to avoid outages when authoritative nameservers
   cannot be reached to refresh expired data.  One of the motivations
   for serve-stale is to make the DNS more resilient to DoS attacks, and
   thereby make them less attractive as an attack vector.  This document
   updates the definitions of TTL from RFC 1034 and RFC 1035 so that
   data can be kept in the cache beyond the TTL expiry, updates RFC 2181
   by interpreting values with the high order bit set as being positive,
   rather than 0, and suggests a cap of 7 days.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on June 11, 2020.

Copyright Notice

   Copyright (c) 2019 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of



Lawrence, et al.          Expires June 11, 2020                 [Page 1]

Internet-Draft               DNS Serve Stale               December 2019


   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   3
   3.  Background  . . . . . . . . . . . . . . . . . . . . . . . . .   3
   4.  Standards Action  . . . . . . . . . . . . . . . . . . . . . .   4
   5.  Example Method  . . . . . . . . . . . . . . . . . . . . . . .   4
   6.  Implementation Considerations . . . . . . . . . . . . . . . .   6
   7.  Implementation Caveats  . . . . . . . . . . . . . . . . . . .   8
   8.  Implementation Status . . . . . . . . . . . . . . . . . . . .   9
   9.  EDNS Option . . . . . . . . . . . . . . . . . . . . . . . . .  10
   10. Security Considerations . . . . . . . . . . . . . . . . . . .  10
   11. Privacy Considerations  . . . . . . . . . . . . . . . . . . .  11
   12. NAT Considerations  . . . . . . . . . . . . . . . . . . . . .  11
   13. IANA Considerations . . . . . . . . . . . . . . . . . . . . .  11
   14. Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  11
   15. References  . . . . . . . . . . . . . . . . . . . . . . . . .  11
     15.1.  Normative References . . . . . . . . . . . . . . . . . .  11
     15.2.  Informative References . . . . . . . . . . . . . . . . .  12
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  12

1.  Introduction

   Traditionally the Time To Live (TTL) of a DNS resource record has
   been understood to represent the maximum number of seconds that a
   record can be used before it must be discarded, based on its
   description and usage in [RFC1035] and clarifications in [RFC2181].

   This document expands the definition of the TTL to explicitly allow
   for expired data to be used in the exceptional circumstance that a
   recursive resolver is unable to refresh the information.  It is
   predicated on the observation that authoritative answer
   unavailability can cause outages even when the underlying data those
   servers would return is typically unchanged.

   We describe a method below for this use of stale data, balancing the
   competing needs of resiliency and freshness.

   This document updates the definitions of TTL from [RFC1034] and
   [RFC1035] so that data can be kept in the cache beyond the TTL
   expiry, and also updates [RFC2181] by interpreting values with the



Lawrence, et al.          Expires June 11, 2020                 [Page 2]

Internet-Draft               DNS Serve Stale               December 2019


   high order bit set as being positive, rather than 0, and also
   suggests a cap of 7 days.

2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   For a glossary of DNS terms, please see [RFC8499].

3.  Background

   There are a number of reasons why an authoritative server may become
   unreachable, including Denial of Service (DoS) attacks, network
   issues, and so on.  If a recursive server is unable to contact the
   authoritative servers for a query but still has relevant data that
   has aged past its TTL, that information can still be useful for
   generating an answer under the metaphorical assumption that "stale
   bread is better than no bread."

   [RFC1035] Section 3.2.1 says that the TTL "specifies the time
   interval that the resource record may be cached before the source of
   the information should again be consulted", and Section 4.1.3 further
   says the TTL, "specifies the time interval (in seconds) that the
   resource record may be cached before it should be discarded."

   A natural English interpretation of these remarks would seem to be
   clear enough that records past their TTL expiration must not be used.
   However, [RFC1035] predates the more rigorous terminology of
   [RFC2119] which softened the interpretation of "may" and "should".

   [RFC2181] aimed to provide "the precise definition of the Time to
   Live", but in Section 8 was mostly concerned with the numeric range
   of values rather than data expiration behavior.  It does, however,
   close that section by noting, "The TTL specifies a maximum time to
   live, not a mandatory time to live."  This wording again does not
   contain BCP 14 [RFC2119] key words, but does convey the natural
   language connotation that data becomes unusable past TTL expiry.

   As of the time of this writing, several large-scale operators use
   stale data for answers in some way.  A number of recursive resolver
   packages, including BIND, Knot, OpenDNS, and Unbound, provide options
   to use stale data.  Apple MacOS can also use stale data as part of
   the Happy Eyeballs algorithms in mDNSResponder.  The collective




Lawrence, et al.          Expires June 11, 2020                 [Page 3]

Internet-Draft               DNS Serve Stale               December 2019


   operational experience is that using stale data can provide
   significant benefit with minimal downside.

4.  Standards Action

   The definition of TTL in [RFC1035] Sections 3.2.1 and 4.1.3 is
   amended to read:

   TTL  a 32-bit unsigned integer number of seconds that specifies the
      duration that the resource record MAY be cached before the source
      of the information MUST again be consulted.  Zero values are
      interpreted to mean that the RR can only be used for the
      transaction in progress, and should not be cached.  Values SHOULD
      be capped on the orders of days to weeks, with a recommended cap
      of 604,800 seconds (seven days).  If the data is unable to be
      authoritatively refreshed when the TTL expires, the record MAY be
      used as though it is unexpired.  See [RFC Editor: replace by RFC
      number] Section 5 and Section 6 for details.

   Interpreting values which have the high-order bit set as being
   positive, rather than 0, is a change from [RFC2181], the rationale
   for which is explained in Section 6.  Suggesting a cap of seven days,
   rather than the 68 years allowed by [RFC2181], reflects the current
   practice of major modern DNS resolvers.

   When returning a response containing stale records, a recursive
   resolver MUST set the TTL of each expired record in the message to a
   value greater than 0, with a RECOMMENDED value of 30 seconds.  See
   Section 6 for explanation.

   Answers from authoritative servers that have a DNS Response Code of
   either 0 (NoError) or 3 (NXDomain) and the Authoritative Answers (AA)
   bit set MUST be considered to have refreshed the data at the
   resolver.  Answers from authoritative servers that have any other
   response code SHOULD be considered a failure to refresh the data and
   therefore leave any previous state intact.  See Section 6 for a
   discussion.

5.  Example Method

   There is more than one way a recursive resolver could responsibly
   implement this resiliency feature while still respecting the intent
   of the TTL as a signal for when data is to be refreshed.

   In this example method four notable timers drive considerations for
   the use of stale data:





Lawrence, et al.          Expires June 11, 2020                 [Page 4]

Internet-Draft               DNS Serve Stale               December 2019


   o  A client response timer, which is the maximum amount of time a
      recursive resolver should allow between the receipt of a
      resolution request and sending its response.

   o  A query resolution timer, which caps the total amount of time a
      recursive resolver spends processing the query.

   o  A failure recheck timer, which limits the frequency at which a
      failed lookup will be attempted again.

   o  A maximum stale timer, which caps the amount of time that records
      will be kept past their expiration.

   Most recursive resolvers already have the query resolution timer, and
   effectively some kind of failure recheck timer.  The client response
   timer and maximum stale timer are new concepts for this mechanism.

   When a recursive resolver receives a request, it should start the
   client response timer.  This timer is used to avoid client timeouts.
   It should be configurable, with a recommended value of 1.8 seconds as
   being just under a common timeout value of 2 seconds while still
   giving the resolver a fair shot at resolving the name.

   The resolver then checks its cache for any unexpired records that
   satisfy the request and returns them if available.  If it finds no
   relevant unexpired data and the Recursion Desired flag is not set in
   the request, it should immediately return the response without
   consulting the cache for expired records.  Typically this response
   would be a referral to authoritative nameservers covering the zone,
   but the specifics are implementation-dependent.

   If iterative lookups will be done, then the failure recheck timer is
   consulted.  Attempts to refresh from non-responsive or otherwise
   failing authoritative nameservers are recommended to be done no more
   frequently than every 30 seconds.  If this request was received
   within this period, the cache may be immediately consulted for stale
   data to satisfy the request.

   Outside the period of the failure recheck timer, the resolver should
   start the query resolution timer and begin the iterative resolution
   process.  This timer bounds the work done by the resolver when
   contacting external authorities, and is commonly around 10 to 30
   seconds.  If this timer expires on an attempted lookup that is still
   being processed, the resolution effort is abandoned.

   If the answer has not been completely determined by the time the
   client response timer has elapsed, the resolver should then check its
   cache to see whether there is expired data that would satisfy the



Lawrence, et al.          Expires June 11, 2020                 [Page 5]

Internet-Draft               DNS Serve Stale               December 2019


   request.  If so, it adds that data to the response message with a TTL
   greater than 0 (as specified in Section 4).  The response is then
   sent to the client while the resolver continues its attempt to
   refresh the data.

   When no authorities are able to be reached during a resolution
   attempt, the resolver should attempt to refresh the delegation and
   restart the iterative lookup process with the remaining time on the
   query resolution timer.  This resumption should be done only once per
   resolution effort.

   Outside the resolution process, the maximum stale timer is used for
   cache management and is independent of the query resolution process.
   This timer is conceptually different from the maximum cache TTL that
   exists in many resolvers, the latter being a clamp on the value of
   TTLs as received from authoritative servers and recommended to be
   seven days in the TTL definition in Section 4.  The maximum stale
   timer should be configurable, and defines the length of time after a
   record expires that it should be retained in the cache.  The
   suggested value is between 1 and 3 days.

6.  Implementation Considerations

   This document mainly describes the issues behind serving stale data
   and intentionally does not provide a formal algorithm.  The concept
   is not overly complex, and the details are best left to resolver
   authors to implement in their codebases.  The processing of serve-
   stale is a local operation, and consistent variables between
   deployments are not needed for interoperability.  However, we would
   like to highlight the impact of various implementation choices,
   starting with the timers involved.

   The most obvious of these is the maximum stale timer.  If this
   variable is too large it could cause excessive cache memory usage,
   but if it is too small, the serve-stale technique becomes less
   effective, as the record may not be in the cache to be used if
   needed.  Shorter values, even less than a day, can effectively handle
   the vast majority of outages.  Longer values, as much as a week, give
   time for monitoring systems to notice a resolution problem and for
   human intervention to fix it; operational experience has been that
   sometimes the right people can be hard to track down and
   unfortunately slow to remedy the situation.

   Increased memory consumption could be mitigated by prioritizing
   removal of stale records over non-expired records during cache
   exhaustion.  Implementations may also wish to consider whether to
   track the names in requests for their last time of use or their
   popularity, using that as an additional factor when considering cache



Lawrence, et al.          Expires June 11, 2020                 [Page 6]

Internet-Draft               DNS Serve Stale               December 2019


   eviction.  A feature to manually flush only stale records could also
   be useful.

   The client response timer is another variable which deserves
   consideration.  If this value is too short, there exists the risk
   that stale answers may be used even when the authoritative server is
   actually reachable but slow; this may result in undesirable answers
   being returned.  Conversely, waiting too long will negatively impact
   user experience.

   The balance for the failure recheck timer is responsiveness in
   detecting the renewed availability of authorities versus the extra
   resource use for resolution.  If this variable is set too large,
   stale answers may continue to be returned even after the
   authoritative server is reachable; per [RFC2308], Section 7, this
   should be no more than five minutes.  If this variable is too small,
   authoritative servers may be targeted with a significant amount of
   excess traffic.

   Regarding the TTL to set on stale records in the response,
   historically TTLs of zero seconds have been problematic for some
   implementations, and negative values can't effectively be
   communicated to existing software.  Other very short TTLs could lead
   to congestive collapse as TTL-respecting clients rapidly try to
   refresh.  The recommended value of 30 seconds not only sidesteps
   those potential problems with no practical negative consequences, it
   also rate limits further queries from any client that honors the TTL,
   such as a forwarding resolver.

   As for the change to treat a TTL with the high-order bit set as
   positive and then clamping it, as opposed to [RFC2181] treating it as
   zero, the rationale here is basically one of engineering simplicity
   versus an inconsequential operational history.  Negative TTLs had no
   rational intentional meaning that wouldn't have been satisfied by
   just sending 0 instead, and similarly there was realistically no
   practical purpose for sending TTLs of 2^25 seconds (1 year) or more.
   There's also no record of TTLs in the wild having the most
   significant bit set in DNS-OARC's "Day in the Life" samples [DITL].
   With no apparent reason for operators to use them intentionally, that
   leaves either errors or non-standard experiments as explanations as
   to why such TTLs might be encountered, with neither providing an
   obviously compelling reason as to why having the leading bit set
   should be treated differently from having any of the next eleven bits
   set and then capped per Section 4.

   Another implementation consideration is the use of stale nameserver
   addresses for lookups.  This is mentioned explicitly because, in some
   resolvers, getting the addresses for nameservers is a separate path



Lawrence, et al.          Expires June 11, 2020                 [Page 7]

Internet-Draft               DNS Serve Stale               December 2019


   from a normal cache lookup.  If authoritative server addresses are
   not able to be refreshed, resolution can possibly still be successful
   if the authoritative servers themselves are up.  For instance,
   consider an attack on a top-level domain that takes its nameservers
   offline; serve-stale resolvers that had expired glue addresses for
   subdomains within that TLD would still be able to resolve names
   within those subdomains, even those it had not previously looked up.

   The directive in Section 4 that only NoError and NXDomain responses
   should invalidate any previously associated answer stems from the
   fact that no other RCODEs that a resolver normally encounters make
   any assertions regarding the name in the question or any data
   associated with it.  This comports with existing resolver behavior
   where a failed lookup (say, during pre-fetching) doesn't impact the
   existing cache state.  Some authoritative server operators have said
   that they would prefer stale answers to be used in the event that
   their servers are responding with errors like ServFail instead of
   giving true authoritative answers.  Implementers MAY decide to return
   stale answers in this situation.

   Since the goal of serve-stale is to provide resiliency for all
   obvious errors to refresh data, these other RCODEs are treated as
   though they are equivalent to not getting an authoritative response.
   Although NXDomain for a previously existing name might well be an
   error, it is not handled that way because there is no effective way
   to distinguish operator intent for legitimate cases versus error
   cases.

   During discussion in the IETF, it was suggested that, if all
   authorities return responses with RCODE of Refused, it may be an
   explicit signal to take down the zone from servers that still have
   the zone's delegation pointed to them.  Refused, however, is also
   overloaded to mean multiple possible failures which could represent
   transient configuration failures.  Operational experience has shown
   that purposely returning Refused is a poor way to achieve an explicit
   takedown of a zone compared to either updating the delegation or
   returning NXDomain with a suitable SOA for extended negative caching.
   Implementers MAY nonetheless consider whether to treat all
   authorities returning Refused as preempting the use of stale data.

7.  Implementation Caveats

   Stale data is used only when refreshing has failed in order to adhere
   to the original intent of the design of the DNS and the behaviour
   expected by operators.  If stale data were to always be used
   immediately and then a cache refresh attempted after the client
   response has been sent, the resolver would frequently be sending data
   that it would have had no trouble refreshing.  Because modern



Lawrence, et al.          Expires June 11, 2020                 [Page 8]

Internet-Draft               DNS Serve Stale               December 2019


   resolvers use techniques like pre-fetching and request coalescing for
   efficiency, it is not necessary that every client request needs to
   trigger a new lookup flow in the presence of stale data, but rather
   that a good-faith effort has been recently made to refresh the stale
   data before it is delivered to any client.

   It is important to continue the resolution attempt after the stale
   response has been sent, until the query resolution timeout, because
   some pathological resolutions can take many seconds to succeed as
   they cope with unavailable servers, bad networks, and other problems.
   Stopping the resolution attempt when the response with expired data
   has been sent would mean that answers in these pathological cases
   would never be refreshed.

   The continuing prohibition against using data with a 0 second TTL
   beyond the current transaction explicitly extends to it being
   unusable even for stale fallback, as it is not to be cached at all.

   Be aware that Canonical Name (CNAME) and DNAME [RFC6672] records
   mingled in the expired cache with other records at the same owner
   name can cause surprising results.  This was observed with an initial
   implementation in BIND when a hostname changed from having an IPv4
   Address (A) record to a CNAME.  The version of BIND being used did
   not evict other types in the cache when a CNAME was received, which
   in normal operations is not a significant issue.  However, after both
   records expired and the authorities became unavailable, the fallback
   to stale answers returned the older A instead of the newer CNAME.

8.  Implementation Status

   The algorithm described in Section 5 was originally implemented as a
   patch to BIND 9.7.0.  It has been in use on Akamai's production
   network since 2011, and effectively smoothed over transient failures
   and longer outages that would have resulted in major incidents.  The
   patch was contributed to Internet Systems Consortium and the
   functionality is now available in BIND 9.12 and later via the options
   stale-answer-enable, stale-answer-ttl, and max-stale-ttl.

   Unbound has a similar feature for serving stale answers, and will
   respond with stale data immediately if it has recently tried and
   failed to refresh the answer by pre-fetching.

   Knot Resolver has a demo module here: https://knot-
   resolver.readthedocs.io/en/stable/modules.html#serve-stale

   Apple's system resolvers are also known to use stale answers, but the
   details are not readily available.




Lawrence, et al.          Expires June 11, 2020                 [Page 9]

Internet-Draft               DNS Serve Stale               December 2019


   In the research paper "When the Dike Breaks: Dissecting DNS Defenses
   During DDoS" [DikeBreaks], the authors detected some use of stale
   answers by resolvers when authorities came under attack.  Their
   research results suggest that more widespread adoption of the
   technique would significantly improve resiliency for the large number
   of requests that fail or experience abnormally long resolution times
   during an attack.

9.  EDNS Option

   During the discussion of serve-stale in the IETF, it was suggested
   that an EDNS option should be available to either explicitly opt-in
   to getting data that is possibly stale, or at least as a debugging
   tool to indicate when stale data has been used for a response.

   The opt-in use case was rejected as the technique was meant to be
   immediately useful in improving DNS resiliency for all clients.

   The reporting case was ultimately also rejected because even the
   simpler version of a proposed option was still too much bother to
   implement for too little perceived value.

10.  Security Considerations

   The most obvious security issue is the increased likelihood of DNSSEC
   validation failures when using stale data because signatures could be
   returned outside their validity period.  Stale negative records can
   increase the time window where newly published TLSA or DS RRs may not
   be used due to cached NSEC or NSEC3 records.  These scenarios would
   only be an issue if the authoritative servers are unreachable, the
   only time the techniques in this document are used, and thus does not
   introduce a new failure in place of what would have otherwise been
   success.

   Additionally, bad actors have been known to use DNS caches to keep
   records alive even after their authorities have gone away.  The serve
   stale feature potentially makes the attack easier, although without
   introducing a new risk.  In addition, attackers could combine this
   with a DDoS attack on authoritative servers with the explicit intent
   of having stale information cached for longer.  But if attackers have
   this capacity, they probably could do much worse than prolonging the
   life of old data.

   In [CloudStrife], it was demonstrated how stale DNS data, namely
   hostnames pointing to addresses that are no longer in use by the
   owner of the name, can be used to co-opt security such as to get
   domain-validated certificates fraudulently issued to an attacker.
   While this document does not create a new vulnerability in this area,



Lawrence, et al.          Expires June 11, 2020                [Page 10]

Internet-Draft               DNS Serve Stale               December 2019


   it does potentially enlarge the window in which such an attack could
   be made.  A proposed mitigation is that certificate authorities
   should fully look up each name starting at the DNS root for every
   name lookup.  Alternatively, CAs should use a resolver that is not
   serving stale data.

11.  Privacy Considerations

   This document does not add any practical new privacy issues.

12.  NAT Considerations

   The method described here is not affected by the use of NAT devices.

13.  IANA Considerations

   There are no IANA considerations.

14.  Acknowledgements

   The authors wish to thank Brian Carpenter, Robert Edmonds, Tony
   Finch, Bob Harold, Tatuya Jinmei, Matti Klock, Jason Moreau, Giovane
   Moura, Jean Roy, Mukund Sivaraman, Davey Song, Paul Vixie, Ralf Weber
   and Paul Wouters for their review and feedback.  Paul Hoffman
   deserves special thanks for submitting a number of Pull Requests.

   Thank you also to the following members of the IESG for their final
   review: Roman Danyliw, Benjamin Kaduk, Suresh Krishnan, Mirja
   Kuehlewind, and Adam Roach.

15.  References

15.1.  Normative References

   [RFC1034]  Mockapetris, P., "Domain names - concepts and facilities",
              STD 13, RFC 1034, DOI 10.17487/RFC1034, November 1987,
              <https://www.rfc-editor.org/info/rfc1034>.

   [RFC1035]  Mockapetris, P., "Domain names - implementation and
              specification", STD 13, RFC 1035, DOI 10.17487/RFC1035,
              November 1987, <https://www.rfc-editor.org/info/rfc1035>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.





Lawrence, et al.          Expires June 11, 2020                [Page 11]

Internet-Draft               DNS Serve Stale               December 2019


   [RFC2181]  Elz, R. and R. Bush, "Clarifications to the DNS
              Specification", RFC 2181, DOI 10.17487/RFC2181, July 1997,
              <https://www.rfc-editor.org/info/rfc2181>.

   [RFC2308]  Andrews, M., "Negative Caching of DNS Queries (DNS
              NCACHE)", RFC 2308, DOI 10.17487/RFC2308, March 1998,
              <https://www.rfc-editor.org/info/rfc2308>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

15.2.  Informative References

   [CloudStrife]
              Borgolte, K., Fiebig, T., Hao, S., Kruegel, C., and G.
              Vigna, "Cloud Strife: Mitigating the Security Risks of
              Domain-Validated Certificates", ACM 2018 Applied
              Networking Research Workshop, DOI 10.1145/3232755.3232859,
              July 2018, <https://www.ndss-symposium.org/wp-
              content/uploads/2018/02/ndss2018_06A-
              4_Borgolte_paper.pdf>.

   [DikeBreaks]
              Moura, G., Heidemann, J., Mueller, M., Schmidt, R., and M.
              Davids, "When the Dike Breaks: Dissecting DNS Defenses
              During DDos", ACM 2018 Internet Measurement Conference,
              DOI 10.1145/3278532.3278534, October 2018,
              <https://www.isi.edu/~johnh/PAPERS/Moura18b.pdf>.

   [DITL]     "DITL Traces and Analysis | DNS-OARC", n.d.,
              <https://www.dns-oarc.net/oarc/data/ditl>.

   [RFC6672]  Rose, S. and W. Wijngaards, "DNAME Redirection in the
              DNS", RFC 6672, DOI 10.17487/RFC6672, June 2012,
              <https://www.rfc-editor.org/info/rfc6672>.

   [RFC8499]  Hoffman, P., Sullivan, A., and K. Fujiwara, "DNS
              Terminology", BCP 219, RFC 8499, DOI 10.17487/RFC8499,
              January 2019, <https://www.rfc-editor.org/info/rfc8499>.

Authors' Addresses

   David C Lawrence
   Oracle

   Email: tale@dd.org




Lawrence, et al.          Expires June 11, 2020                [Page 12]

Internet-Draft               DNS Serve Stale               December 2019


   Warren "Ace" Kumari
   Google
   1600 Amphitheatre Parkway
   Mountain View  CA 94043
   USA

   Email: warren@kumari.net


   Puneet Sood
   Google

   Email: puneets@google.com






































Lawrence, et al.          Expires June 11, 2020                [Page 13]