Internet DRAFT - draft-ietf-idr-rfc2842bis


Network Working Group                                      Ravi Chandra
Internet Draft                                         Redback Networks
Expiration Date: October 2002                           John G. Scudder
Obsoletes RFC2842                                         cisco Systems

                 Capabilities Advertisement with BGP-4


1. Status of this Memo

   This document is an Internet-Draft and is in full conformance with
   all provisions of Section 10 of RFC2026.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as ``work in progress.''

   The list of current Internet-Drafts can be accessed at

   The list of Internet-Draft Shadow Directories can be accessed at

2. Abstract

   Currently BGP-4 requires that when a BGP speaker receives an OPEN
   message with one or more unrecognized Optional Parameters, the
   speaker must terminate BGP peering. This complicates introduction of
   new capabilities in BGP.

   This document defines new Optional Parameter, called Capabilities,
   that is expected to facilitate introduction of new capabilities in
   BGP by providing graceful capability advertisement without requiring
   that BGP peering be terminated.

   This document obsoletes RFC2842.

Chandra, Scudder                                                [Page 1]

Internet Draft      draft-ietf-idr-rfc2842bis-02.txt          April 2002

3. Specification of Requirements

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   document are to be interpreted as described in RFC 2119 [RFC2119].

4. Overview of Operations

   When a BGP speaker [BGP-4] that supports capabilities advertisement
   sends an OPEN message to its BGP peer, the message MAY include an
   Optional Parameter, called Capabilities. The parameter lists the
   capabilities supported by the speaker.

   A BGP speaker determines the capabilities supported by its peer by
   examining the list of capabilities present in the Capabilities
   Optional Parameter carried by the OPEN message that the speaker
   receives from the peer.

   A BGP speaker that supports a particular capability may use this
   capability with its peer after the speaker determines (as described
   above) that the peer supports this capability.

   A BGP speaker determines that its peer doesn't support capabilities
   advertisement, if in response to an OPEN message that carries the
   Capabilities Optional Parameter, the speaker receives a NOTIFICATION
   message with the Error Subcode set to Unsupported Optional Parameter.
   In this case the speaker SHOULD attempt to re-establish a BGP
   connection with the peer without sending to the peer the Capabilities
   Optional Parameter.

   If a BGP speaker that supports a certain capability determines that
   its peer doesn't support this capability, the speaker MAY send a
   NOTIFICATION message to the peer, and terminate peering (see Section
   "Extensions to Error Handling" for more details). The Error Subcode
   in the message is set to Unsupported Capability. The message SHOULD
   contain the capability (capabilities) that causes the speaker to send
   the message.  The decision to send the message and terminate peering
   is local to the speaker. If terminated, such peering SHOULD NOT be
   re-established automatically.

Chandra, Scudder                                                [Page 2]

Internet Draft      draft-ietf-idr-rfc2842bis-02.txt          April 2002

5. Capabilities Optional Parameter (Parameter Type 2):

   This is an Optional Parameter that is used by a BGP speaker to convey
   to its BGP peer the list of capabilities supported by the speaker.

   The parameter contains one or more triples <Capability Code,
   Capability Length, Capability Value>, where each triple is encoded as
   shown below:

      | Capability Code (1 octet)    |
      | Capability Length (1 octet)  |
      | Capability Value (variable)  |

   The use and meaning of these fields are as follows:

      Capability Code:

         Capability Code is a one octet field that unambiguously
         identifies individual capabilities.

      Capability Length:

         Capability Length is a one octet field that contains the length
         of the Capability Value field in octets.

      Capability Value:

         Capability Value is a variable length field that is interpreted
         according to the value of the Capability Code field.

   BGP speakers SHOULD NOT include more than one instance of a
   capability with the same Capability Code, Capability Length, and
   Capability Value.  Note however, that processing of multiple
   instances of such capability does not require special handling, as
   additional instances do not change the meaning of announced

Chandra, Scudder                                                [Page 3]

Internet Draft      draft-ietf-idr-rfc2842bis-02.txt          April 2002

   BGP speakers MAY include more than one instance of a capability (as
   identified by the Capability Code) with non-zero Capability Length
   field, but with different Capability Value, and either the same or
   different Capability Length.  Processing of these capability
   instances is specific to the Capability Code and MUST be described in
   the document introducing the new capability.

6. Extensions to Error Handling

   This document defines new Error Subcode - Unsupported Capability.
   The value of this Subcode is 7. The Data field in the NOTIFICATION
   message SHOULD list the set of capabilities that cause the speaker to
   send the message. Each such capability is encoded the same way as it
   would be encoded in the OPEN message.

7. IANA Considerations

   This document defines a Capability Optional Parameter along with an
   Capability Code field. IANA is expected to create and maintain the
   registry for Capability Code values. Capability Code value 0 is
   reserved. Capability Code values 1 through 63 are to be assigned by
   IANA using the "IETF Consensus" policy defined in RFC2434. Capability
   Code values 64 through 127 are to be assigned by IANA, using the
   "First  Come First Served" policy defined in RFC2434. Capability Code
   values 128 through 255 are for "Private Use" as defined in RFC2434.

8. Security Considerations

   This extension to BGP does not change the underlying security issues
   inherent in the existing BGP [Heffernan].

9. Acknowledgements

   The authors would like to thank members of the IDR Working Group for
   their review and comments.

Chandra, Scudder                                                [Page 4]

Internet Draft      draft-ietf-idr-rfc2842bis-02.txt          April 2002

10. Comparison with RFC2842

   In addition to several minor editorial changes, this document also
   clarifies how to handle multiple instances of the same capability.

11. References

   [BGP-4]   Rekhter, Y., and T. Li, "A Border Gateway Protocol 4
   (BGP-4)", RFC 1771, March 1995.

   [Heffernan]  Heffernan, A., "Protection of BGP Sessions via the TCP
   MD5 Signature Option", RFC2385, August 1998.

   [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
   Requirement Levels", BCP 14, RFC 2119, March 1997.

12. Author Information

   Ravi Chandra
   Redback Networks Inc.
   350, Holger Way
   San Jose, CA 95134


   John G. Scudder
   Cisco Systems, Inc.
   170 West Tasman Drive
   San Jose, CA 95134

Chandra, Scudder                                                [Page 5]