Internet DRAFT - draft-ietf-lamps-cms-shakes
draft-ietf-lamps-cms-shakes
LAMPS WG P. Kampanakis
Internet-Draft Cisco Systems
Updates: 3370 (if approved) Q. Dang
Intended status: Standards Track NIST
Expires: March 19, 2020 September 16, 2019
Use of the SHAKE One-way Hash Functions in the Cryptographic Message
Syntax (CMS)
draft-ietf-lamps-cms-shakes-18
Abstract
This document updates the "Cryptographic Message Syntax Algorithms"
(RFC3370) and describes the conventions for using the SHAKE family of
hash functions in the Cryptographic Message Syntax as one-way hash
functions with the RSA Probabilistic signature and ECDSA signature
algorithms. The conventions for the associated signer public keys in
CMS are also described.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on March 19, 2020.
Copyright Notice
Copyright (c) 2019 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
Kampanakis & Dang Expires March 19, 2020 [Page 1]
Internet-Draft SHAKEs in CMS September 2019
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Change Log . . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 6
3. Identifiers . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. Use in CMS . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.1. Message Digests . . . . . . . . . . . . . . . . . . . . . 7
4.2. Signatures . . . . . . . . . . . . . . . . . . . . . . . 8
4.2.1. RSASSA-PSS Signatures . . . . . . . . . . . . . . . . 8
4.2.2. ECDSA Signatures . . . . . . . . . . . . . . . . . . 9
4.3. Public Keys . . . . . . . . . . . . . . . . . . . . . . . 9
4.4. Message Authentication Codes . . . . . . . . . . . . . . 10
5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 10
6. Security Considerations . . . . . . . . . . . . . . . . . . . 11
7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 11
8. References . . . . . . . . . . . . . . . . . . . . . . . . . 11
8.1. Normative References . . . . . . . . . . . . . . . . . . 11
8.2. Informative References . . . . . . . . . . . . . . . . . 12
Appendix A. ASN.1 Module . . . . . . . . . . . . . . . . . . . . 14
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 18
1. Change Log
[ EDNOTE: Remove this section before publication. ]
o draft-ietf-lamps-cms-shake-18:
* Minor ASN.1 changes.
o draft-ietf-lamps-cms-shake-17:
* Minor updates for EDNOTE accuracy.
o draft-ietf-lamps-cms-shake-16:
* Minor nits.
* Using bytes instead of bits for consistency.
o draft-ietf-lamps-cms-shake-15:
* Minor editorial nits.
Kampanakis & Dang Expires March 19, 2020 [Page 2]
Internet-Draft SHAKEs in CMS September 2019
o draft-ietf-lamps-cms-shake-14:
* Fixing error with incorrect preimage resistance bits for SHA128
and SHA256.
o draft-ietf-lamps-cms-shake-13:
* Addressing comments from Dan M.'s secdir review.
* Addressing comment from Scott B.'s opsdir review about
references in the abstract.
o draft-ietf-lamps-cms-shake-12:
* Nits identified by Roman, Barry L. in ballot position review.
o draft-ietf-lamps-cms-shake-11:
* Minor nits.
* Nits identified by Roman in AD Review.
o draft-ietf-lamps-cms-shake-10:
* Updated IANA considerations section to request for OID
assignments.
o draft-ietf-lamps-cms-shake-09:
* Fixed minor text nit.
* Updates in Sec Considerations section.
o draft-ietf-lamps-cms-shake-08:
* id-shake128-len and id-shake256-len were replaced with id-
sha128 with 32 bytes output length and id-shake256 with 64
bytes output length.
* Fixed a discrepancy between section 3 and 4.4 about the KMAC
OIDs that have parameters as optional.
o draft-ietf-lamps-cms-shake-07:
* Small nit from Russ while in WGLC.
o draft-ietf-lamps-cms-shake-06:
Kampanakis & Dang Expires March 19, 2020 [Page 3]
Internet-Draft SHAKEs in CMS September 2019
* Incorporated Eric's suggestion from WGLC.
o draft-ietf-lamps-cms-shake-05:
* Added informative references.
* Updated ASN.1 so it compiles.
* Updated IANA considerations.
o draft-ietf-lamps-cms-shake-04:
* Added RFC8174 reference and text.
* Explicitly explained why RSASSA-PSS-params are omitted in
section 4.2.1.
* Simplified Public Keys section by removing redundant info from
RFCs.
o draft-ietf-lamps-cms-shake-03:
* Removed paragraph suggesting KMAC to be used in generating k in
Deterministic ECDSA. That should be RFC6979-bis.
* Removed paragraph from Security Considerations that talks about
randomness of k because we are using deterministic ECDSA.
* Completed ASN.1 module and fixed KMAC ASN.1 based on Jim's
feedback.
* Text fixes.
o draft-ietf-lamps-cms-shake-02:
* Updates based on suggestions and clarifications by Jim.
* Started ASN.1 module.
o draft-ietf-lamps-cms-shake-01:
* Significant reorganization of the sections to simplify the
introduction, the new OIDs and their use in CMS.
* Added new OIDs for RSASSA-PSS that hardcodes hash, salt and
MGF, according the WG consensus.
Kampanakis & Dang Expires March 19, 2020 [Page 4]
Internet-Draft SHAKEs in CMS September 2019
* Updated Public Key section to use the new RSASSA-PSS OIDs and
clarify the algorithm identifier usage.
* Removed the no longer used SHAKE OIDs from section 3.1.
o draft-ietf-lamps-cms-shake-00:
* Various updates to title and section names.
* Content changes filling in text and references.
o draft-dang-lamps-cms-shakes-hash-00:
* Initial version
2. Introduction
The "Cryptographic Message Syntax (CMS)" [RFC5652] is used to
digitally sign, digest, authenticate, or encrypt arbitrary message
contents. "Cryptographic Message Syntax (CMS) Algorithms" [RFC3370]
defines the use of common cryptographic algorithms with CMS. This
specification updates RFC3370 and describes the use of the SHAKE128
and SHAKE256 specified in [SHA3] as new hash functions in CMS. In
addition, it describes the use of these functions with the RSASSA-PSS
signature algorithm [RFC8017] and the Elliptic Curve Digital
Signature Algorithm (ECDSA) [X9.62] with the CMS signed-data content
type.
In the SHA-3 family, two extendable-output functions (SHAKEs),
SHAKE128 and SHAKE256, are defined. Four other hash function
instances, SHA3-224, SHA3-256, SHA3-384, and SHA3-512, are also
defined but are out of scope for this document. A SHAKE is a
variable length hash function defined as SHAKE(M, d) where the output
is a d-bits-long digest of message M. The corresponding collision
and second-preimage-resistance strengths for SHAKE128 are
min(d/2,128) and min(d,128) bits, respectively (Appendix A.1 [SHA3]).
And the corresponding collision and second-preimage-resistance
strengths for SHAKE256 are min(d/2,256) and min(d,256) bits,
respectively. In this specification we use d=256 (for SHAKE128) and
d=512 (for SHAKE256).
A SHAKE can be used in CMS as the message digest function (to hash
the message to be signed) in RSASSA-PSS and ECDSA, message
authentication code and as the mask generation function (MGF) in
RSASSA-PSS. This specification describes the identifiers for SHAKEs
to be used in CMS and their meaning.
Kampanakis & Dang Expires March 19, 2020 [Page 5]
Internet-Draft SHAKEs in CMS September 2019
2.1. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
3. Identifiers
This section identifies eight new object identifiers (OIDs) for using
SHAKE128 and SHAKE256 in CMS.
Two object identifiers for SHAKE128 and SHAKE256 hash functions are
defined in [shake-nist-oids] and we include them here for
convenience.
id-shake128 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2)
country(16) us(840) organization(1) gov(101) csor(3)
nistAlgorithm(4) 2 11 }
id-shake256 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2)
country(16) us(840) organization(1) gov(101) csor(3)
nistAlgorithm(4) 2 12 }
In this specification, when using the id-shake128 or id-shake256
algorithm identifiers, the parameters MUST be absent. That is, the
identifier SHALL be a SEQUENCE of one component, the OID.
[I-D.ietf-lamps-pkix-shake] [ EDNOTE: Update reference with the RFC
when it is published. ] defines two identifiers for RSASSA-PSS
signatures using SHAKEs which we include here for convenience.
id-RSASSA-PSS-SHAKE128 OBJECT IDENTIFIER ::= { iso(1)
identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) algorithms(6) 30 }
id-RSASSA-PSS-SHAKE256 OBJECT IDENTIFIER ::= { iso(1)
identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) algorithms(6) 31 }
The same RSASSA-PSS algorithm identifiers can be used for identifying
public keys and signatures.
[I-D.ietf-lamps-pkix-shake] [ EDNOTE: Update reference with the RFC
when it is published. ] also defines two algorithm identifiers of
ECDSA signatures using SHAKEs which we include here for convenience.
Kampanakis & Dang Expires March 19, 2020 [Page 6]
Internet-Draft SHAKEs in CMS September 2019
id-ecdsa-with-shake128 OBJECT IDENTIFIER ::= { iso(1)
identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) algorithms(6) 32 }
id-ecdsa-with-shake256 OBJECT IDENTIFIER ::= { iso(1)
identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) algorithms(6) 33 }
The parameters for the four RSASSA-PSS and ECDSA identifiers MUST be
absent. That is, each identifier SHALL be a SEQUENCE of one
component, the OID.
Two object identifiers for KMACs using SHAKE128 and SHAKE256 as
defined in by the National Institute of Standards and Technology
(NIST) in [shake-nist-oids] and we include them here for convenience.
id-KmacWithSHAKE128 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2)
country(16) us(840) organization(1) gov(101) csor(3)
nistAlgorithm(4) 2 19 }
id-KmacWithSHAKE256 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2)
country(16) us(840) organization(1) gov(101) csor(3)
nistAlgorithm(4) 2 20 }
The parameters for id-KmacWithSHAKE128 and id-KmacWithSHAKE256 are
OPTIONAL.
Section 4.1, Section 4.2.1, Section 4.2.2 and Section 4.4 specify the
required output length for each use of SHAKE128 or SHAKE256 in
message digests, RSASSA-PSS, ECDSA and KMAC.
4. Use in CMS
4.1. Message Digests
The id-shake128 and id-shake256 OIDs (Section 3) can be used as the
digest algorithm identifiers located in the SignedData, SignerInfo,
DigestedData, and the AuthenticatedData digestAlgorithm fields in CMS
[RFC5652]. The OID encoding MUST omit the parameters field and the
output length of SHAKE128 or SHAKE256 as the message digest MUST be
32 or 64 bytes, respectively.
The digest values are located in the DigestedData field and the
Message Digest authenticated attribute included in the
signedAttributes of the SignedData signerInfo. In addition, digest
values are input to signature algorithms. The digest algorithm MUST
be the same as the message hash algorithms used in signatures.
Kampanakis & Dang Expires March 19, 2020 [Page 7]
Internet-Draft SHAKEs in CMS September 2019
4.2. Signatures
In CMS, signature algorithm identifiers are located in the SignerInfo
signatureAlgorithm field of SignedData content type and
countersignature attribute. Signature values are located in the
SignerInfo signature field of SignedData content type and
countersignature attribute.
Conforming implementations that process RSASSA-PSS and ECDSA with
SHAKE signatures when processing CMS data MUST recognize the
corresponding OIDs specified in Section 3.
When using RSASSA-PSS or ECDSA with SHAKEs, the RSA modulus or ECDSA
curve order SHOULD be chosen in line with the SHAKE output length.
Refer to Section 6 for more details.
4.2.1. RSASSA-PSS Signatures
The RSASSA-PSS algorithm is defined in [RFC8017]. When id-RSASSA-
PSS-SHAKE128 or id-RSASSA-PSS-SHAKE256 specified in Section 3 is
used, the encoding MUST omit the parameters field. That is, the
AlgorithmIdentifier SHALL be a SEQUENCE of one component, id-RSASSA-
PSS-SHAKE128 or id-RSASSA-PSS-SHAKE256. [RFC4055] defines RSASSA-
PSS-params that are used to define the algorithms and inputs to the
algorithm. This specification does not use parameters because the
hash, mask generation algorithm, trailer and salt are embedded in the
OID definition.
The hash algorithm to hash a message being signed and the hash
algorithm as the mask generation function used in RSASSA-PSS MUST be
the same: both SHAKE128 or both SHAKE256. The output length of the
hash algorithm which hashes the message SHALL be 32 (for SHAKE128) or
64 bytes (for SHAKE256).
The mask generation function takes an octet string of variable length
and a desired output length as input, and outputs an octet string of
the desired length. In RSASSA-PSS with SHAKEs, the SHAKEs MUST be
used natively as the MGF function, instead of the MGF1 algorithm that
uses the hash function in multiple iterations as specified in
Section B.2.1 of [RFC8017]. In other words, the MGF is defined as
the SHAKE128 or SHAKE256 with input being the mgfSeed for id-RSASSA-
PSS- SHAKE128 and id-RSASSA-PSS-SHAKE256, respectively. The mgfSeed
is the seed from which mask is generated, an octet string [RFC8017].
As explained in Step 9 of section 9.1.1 of [RFC8017], the output
length of the MGF is emLen - hLen - 1 bytes. emLen is the maximum
message length ceil((n-1)/8), where n is the RSA modulus in bits.
hLen is 32 and 64-bytes for id-RSASSA-PSS-SHAKE128 and id-RSASSA-PSS-
SHAKE256, respectively. Thus when SHAKE is used as the MGF, the
Kampanakis & Dang Expires March 19, 2020 [Page 8]
Internet-Draft SHAKEs in CMS September 2019
SHAKE output length maskLen is (8*emLen - 264) or (8*emLen - 520)
bits, respectively. For example, when RSA modulus n is 2048, the
output length of SHAKE128 or SHAKE256 as the MGF will be 1784 or
1528-bits when id-RSASSA-PSS-SHAKE128 or id-RSASSA-PSS-SHAKE256 is
used, respectively.
The RSASSA-PSS saltLength MUST be 32 bytes for id-RSASSA-PSS-SHAKE128
or 64 bytes for id-RSASSA-PSS-SHAKE256. Finally, the trailerField
MUST be 1, which represents the trailer field with hexadecimal value
0xBC [RFC8017].
4.2.2. ECDSA Signatures
The Elliptic Curve Digital Signature Algorithm (ECDSA) is defined in
[X9.62]. When the id-ecdsa-with-shake128 or id-ecdsa-with-shake256
(specified in Section 3) algorithm identifier appears, the respective
SHAKE function is used as the hash. The encoding MUST omit the
parameters field. That is, the AlgorithmIdentifier SHALL be a
SEQUENCE of one component, the OID id-ecdsa-with-shake128 or id-
ecdsa-with-shake256.
For simplicity and compliance with the ECDSA standard specification,
the output length of the hash function must be explicitly determined.
The output length for SHAKE128 or SHAKE256 used in ECDSA MUST be 32
or 64 bytes, respectively.
Conforming CA implementations that generate ECDSA with SHAKE
signatures in certificates or CRLs SHOULD generate such signatures
with a deterministically generated, non-random k in accordance with
all the requirements specified in [RFC6979]. They MAY also generate
such signatures in accordance with all other recommendations in
[X9.62] or [SEC1] if they have a stated policy that requires
conformance to those standards. Those standards have not specified
SHAKE128 and SHAKE256 as hash algorithm options. However, SHAKE128
and SHAKE256 with output length being 32 and 64 octets, respectively
can be used instead of 256 and 512-bit output hash algorithms such as
SHA256 and SHA512.
4.3. Public Keys
In CMS, the signer's public key algorithm identifiers are located in
the OriginatorPublicKey's algorithm attribute. The conventions and
encoding for RSASSA-PSS and ECDSA public keys algorithm identifiers
are as specified in Section 2.3 of [RFC3279], Section 3.1 of
[RFC4055] and Section 2.1 of [RFC5480].
Traditionally, the rsaEncryption object identifier is used to
identify RSA public keys. The rsaEncryption object identifier
Kampanakis & Dang Expires March 19, 2020 [Page 9]
Internet-Draft SHAKEs in CMS September 2019
continues to identify the public key when the RSA private key owner
does not wish to limit the use of the public key exclusively to
RSASSA-PSS with SHAKEs. When the RSA private key owner wishes to
limit the use of the public key exclusively to RSASSA-PSS, the
AlgorithmIdentifier for RSASSA-PSS defined in Section 3 SHOULD be
used as the algorithm attribute in the OriginatorPublicKey sequence.
Conforming client implementations that process RSASSA-PSS with SHAKE
public keys in CMS message MUST recognize the corresponding OIDs in
Section 3.
Conforming implementations MUST specify and process the algorithms
explicitly by using the OIDs specified in Section 3 when encoding
ECDSA with SHAKE public keys in CMS messages.
The identifier parameters, as explained in Section 3, MUST be absent.
4.4. Message Authentication Codes
KMAC message authentication code (KMAC) is specified in [SP800-185].
In CMS, KMAC algorithm identifiers are located in the
AuthenticatedData macAlgorithm field. The KMAC values are located in
the AuthenticatedData mac field.
When the id-KmacWithSHAKE128 or id-KmacWithSHAKE256 OID is used as
the MAC algorithm identifier, the parameters field is optional
(absent or present). If absent, the SHAKE256 output length used in
KMAC is 32 or 64 bytes, respectively, and the customization string is
an empty string by default.
Conforming implementations that process KMACs with the SHAKEs when
processing CMS data MUST recognize these identifiers.
When calculating the KMAC output, the variable N is 0xD2B282C2, S is
an empty string, and L, the integer representing the requested output
length in bits, is 256 or 512 for KmacWithSHAKE128 or
KmacWithSHAKE256, respectively, in this specification.
5. IANA Considerations
One object identifier for the ASN.1 module in Appendix A was
requested for the SMI Security for S/MIME Module Identifiers
(1.2.840.113549.1.9.16.0) registry:
+---------+----------------------+--------------------+
| Decimal | Description | References |
+---------+----------------------+--------------------+
| 70 | CMSAlgsForSHAKE-2019 | [EDNOTE: THIS RFC] |
+---------+----------------------+--------------------+
Kampanakis & Dang Expires March 19, 2020 [Page 10]
Internet-Draft SHAKEs in CMS September 2019
6. Security Considerations
This document updates [RFC3370]. The security considerations section
of that document applies to this specification as well.
NIST has defined appropriate use of the hash functions in terms of
the algorithm strengths and expected time frames for secure use in
Special Publications (SPs) [SP800-78-4] and [SP800-107]. These
documents can be used as guides to choose appropriate key sizes for
various security scenarios.
SHAKE128 with output length of 32 bytes offers 128-bits of collision
and preimage resistance. Thus, SHAKE128 OIDs in this specification
are RECOMMENDED with 2048 (112-bit security) or 3072-bit (128-bit
security) RSA modulus or curves with group order of 256-bits (128-bit
security). SHAKE256 with 64 bytes output length offers 256-bits of
collision and preimage resistance. Thus, the SHAKE256 OIDs in this
specification are RECOMMENDED with 4096-bit RSA modulus or higher or
curves with group order of at least 512 bits such as NIST Curve P-521
(256-bit security). Note that we recommended 4096-bit RSA because we
would need 15360-bit modulus for 256-bits of security which is
impractical for today's technology.
When more than two parties share the same message-authentication key,
data origin authentication is not provided. Any party that knows the
message-authentication key can compute a valid MAC, therefore the
content could originate from any one of the parties.
7. Acknowledgements
This document is based on Russ Housley's draft
[I-D.housley-lamps-cms-sha3-hash]. It replaces SHA3 hash functions
by SHAKE128 and SHAKE256 as the LAMPS WG agreed.
The authors would like to thank Russ Housley for his guidance and
very valuable contributions with the ASN.1 module. Valuable feedback
was also provided by Eric Rescorla.
8. References
8.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
Kampanakis & Dang Expires March 19, 2020 [Page 11]
Internet-Draft SHAKEs in CMS September 2019
[RFC3370] Housley, R., "Cryptographic Message Syntax (CMS)
Algorithms", RFC 3370, DOI 10.17487/RFC3370, August 2002,
<https://www.rfc-editor.org/info/rfc3370>.
[RFC4055] Schaad, J., Kaliski, B., and R. Housley, "Additional
Algorithms and Identifiers for RSA Cryptography for use in
the Internet X.509 Public Key Infrastructure Certificate
and Certificate Revocation List (CRL) Profile", RFC 4055,
DOI 10.17487/RFC4055, June 2005,
<https://www.rfc-editor.org/info/rfc4055>.
[RFC5480] Turner, S., Brown, D., Yiu, K., Housley, R., and T. Polk,
"Elliptic Curve Cryptography Subject Public Key
Information", RFC 5480, DOI 10.17487/RFC5480, March 2009,
<https://www.rfc-editor.org/info/rfc5480>.
[RFC5652] Housley, R., "Cryptographic Message Syntax (CMS)", STD 70,
RFC 5652, DOI 10.17487/RFC5652, September 2009,
<https://www.rfc-editor.org/info/rfc5652>.
[RFC8017] Moriarty, K., Ed., Kaliski, B., Jonsson, J., and A. Rusch,
"PKCS #1: RSA Cryptography Specifications Version 2.2",
RFC 8017, DOI 10.17487/RFC8017, November 2016,
<https://www.rfc-editor.org/info/rfc8017>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[SHA3] National Institute of Standards and Technology, U.S.
Department of Commerce, "SHA-3 Standard - Permutation-
Based Hash and Extendable-Output Functions", FIPS PUB 202,
August 2015.
[SP800-185]
National Institute of Standards and Technology, "SHA-3
Derived Functions: cSHAKE, KMAC, TupleHash and
ParallelHash. NIST SP 800-185", December 2016,
<http://nvlpubs.nist.gov/nistpubs/SpecialPublications/
NIST.SP.800-185.pdf>.
8.2. Informative References
[I-D.housley-lamps-cms-sha3-hash]
Housley, R., "Use of the SHA3 One-way Hash Functions in
the Cryptographic Message Syntax (CMS)", draft-housley-
lamps-cms-sha3-hash-00 (work in progress), March 2017.
Kampanakis & Dang Expires March 19, 2020 [Page 12]
Internet-Draft SHAKEs in CMS September 2019
[I-D.ietf-lamps-pkix-shake]
Kampanakis, P. and Q. Dang, "Internet X.509 Public Key
Infrastructure: Additional Algorithm Identifiers for
RSASSA-PSS and ECDSA using SHAKEs", draft-ietf-lamps-pkix-
shake-15 (work in progress), July 2019.
[RFC3279] Bassham, L., Polk, W., and R. Housley, "Algorithms and
Identifiers for the Internet X.509 Public Key
Infrastructure Certificate and Certificate Revocation List
(CRL) Profile", RFC 3279, DOI 10.17487/RFC3279, April
2002, <https://www.rfc-editor.org/info/rfc3279>.
[RFC5753] Turner, S. and D. Brown, "Use of Elliptic Curve
Cryptography (ECC) Algorithms in Cryptographic Message
Syntax (CMS)", RFC 5753, DOI 10.17487/RFC5753, January
2010, <https://www.rfc-editor.org/info/rfc5753>.
[RFC5911] Hoffman, P. and J. Schaad, "New ASN.1 Modules for
Cryptographic Message Syntax (CMS) and S/MIME", RFC 5911,
DOI 10.17487/RFC5911, June 2010,
<https://www.rfc-editor.org/info/rfc5911>.
[RFC6268] Schaad, J. and S. Turner, "Additional New ASN.1 Modules
for the Cryptographic Message Syntax (CMS) and the Public
Key Infrastructure Using X.509 (PKIX)", RFC 6268,
DOI 10.17487/RFC6268, July 2011,
<https://www.rfc-editor.org/info/rfc6268>.
[RFC6979] Pornin, T., "Deterministic Usage of the Digital Signature
Algorithm (DSA) and Elliptic Curve Digital Signature
Algorithm (ECDSA)", RFC 6979, DOI 10.17487/RFC6979, August
2013, <https://www.rfc-editor.org/info/rfc6979>.
[SEC1] Standards for Efficient Cryptography Group, "SEC 1:
Elliptic Curve Cryptography", May 2009,
<http://www.secg.org/sec1-v2.pdf>.
[shake-nist-oids]
National Institute of Standards and Technology, "Computer
Security Objects Register", October 2017,
<https://csrc.nist.gov/Projects/Computer-Security-Objects-
Register/Algorithm-Registration>.
Kampanakis & Dang Expires March 19, 2020 [Page 13]
Internet-Draft SHAKEs in CMS September 2019
[SP800-107]
National Institute of Standards and Technology (NIST),
"SP800-107: Recommendation for Applications Using Approved
Hash Algorithms", May 2014,
<https://csrc.nist.gov/csrc/media/publications/sp/800-107/
rev-1/final/documents/draft_revised_sp800-107.pdf>.
[SP800-78-4]
National Institute of Standards and Technology (NIST),
"SP800-78-4: Cryptographic Algorithms and Key Sizes for
Personal Identity Verification", May 2014,
<https://csrc.nist.gov/csrc/media/publications/sp/800-
78/4/final/documents/sp800_78-4_revised_draft.pdf>.
[X9.62] American National Standard for Financial Services (ANSI),
"X9.62-2005 Public Key Cryptography for the Financial
Services Industry: The Elliptic Curve Digital Signature
Standard (ECDSA)", November 2005.
Appendix A. ASN.1 Module
This appendix includes the ASN.1 modules for SHAKEs in CMS. This
module includes some ASN.1 from other standards for reference.
CMSAlgsForSHAKE-2019 { iso(1) member-body(2) us(840)
rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) modules(0)
id-mod-cms-shakes-2019(70) }
DEFINITIONS EXPLICIT TAGS ::=
BEGIN
-- EXPORTS ALL;
IMPORTS
DIGEST-ALGORITHM, MAC-ALGORITHM, SMIME-CAPS
FROM AlgorithmInformation-2009
{ iso(1) identified-organization(3) dod(6) internet(1) security(5)
mechanisms(5) pkix(7) id-mod(0)
id-mod-algorithmInformation-02(58) }
RSAPublicKey, rsaEncryption, id-ecPublicKey
FROM PKIXAlgs-2009 { iso(1) identified-organization(3) dod(6)
internet(1) security(5) mechanisms(5) pkix(7) id-mod(0)
id-mod-pkix1-algorithms2008-02(56) }
sa-rsassapssWithSHAKE128, sa-rsassapssWithSHAKE256,
Kampanakis & Dang Expires March 19, 2020 [Page 14]
Internet-Draft SHAKEs in CMS September 2019
sa-ecdsaWithSHAKE128, sa-ecdsaWithSHAKE256
FROM PKIXAlgsForSHAKE-2019 {
iso(1) identified-organization(3) dod(6)
internet(1) security(5) mechanisms(5) pkix(7) id-mod(0)
id-mod-pkix1-shakes-2019(94) } ;
-- Message Digest Algorithms (mda-)
-- used in SignedData, SignerInfo, DigestedData,
-- and the AuthenticatedData digestAlgorithm
-- fields in CMS
--
-- This expands MessageAuthAlgs from [RFC5652] and
-- MessageDigestAlgs in [RFC5753]
--
-- MessageDigestAlgs DIGEST-ALGORITHM ::= {
-- mda-shake128 |
-- mda-shake256,
-- ...
-- }
--
-- One-Way Hash Functions
-- SHAKE128
mda-shake128 DIGEST-ALGORITHM ::= {
IDENTIFIER id-shake128 -- with output length 32 bytes.
}
id-shake128 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16)
us(840) organization(1) gov(101)
csor(3) nistAlgorithm(4)
hashAlgs(2) 11 }
-- SHAKE256
mda-shake256 DIGEST-ALGORITHM ::= {
IDENTIFIER id-shake256 -- with output length 64 bytes.
}
id-shake256 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16)
us(840) organization(1) gov(101)
csor(3) nistAlgorithm(4)
hashAlgs(2) 12 }
--
-- Public key algorithm identifiers located in the
-- OriginatorPublicKey's algorithm attribute in CMS.
-- And Signature identifiers used in SignerInfo
-- signatureAlgorithm field of SignedData content
-- type and countersignature attribute in CMS.
--
-- From RFC5280, for reference.
Kampanakis & Dang Expires March 19, 2020 [Page 15]
Internet-Draft SHAKEs in CMS September 2019
-- rsaEncryption OBJECT IDENTIFIER ::= { pkcs-1 1 }
-- When the rsaEncryption algorithm identifier is used
-- for a public key, the AlgorithmIdentifier parameters
-- field MUST contain NULL.
--
id-RSASSA-PSS-SHAKE128 OBJECT IDENTIFIER ::= { iso(1)
identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) algorithms(6) 30 }
id-RSASSA-PSS-SHAKE256 OBJECT IDENTIFIER ::= { iso(1)
identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) algorithms(6) 31 }
-- When the id-RSASSA-PSS-* algorithm identifiers are used
-- for a public key or signature in CMS, the AlgorithmIdentifier
-- parameters field MUST be absent. The message digest algorithm
-- used in RSASSA-PSS MUST be SHAKE128 or SHAKE256 with a 32 or
-- 64 byte outout length, respectively. The mask generation
-- function MUST be SHAKE128 or SHAKE256 with an output length
-- of (8*ceil((n-1)/8) - 264) or (8*ceil((n-1)/8) - 520) bits,
-- respectively, where n is the RSA modulus in bits.
-- The RSASSA-PSS saltLength MUST be 32 or 64 bytes, respectively.
-- The trailerField MUST be 1, which represents the trailer
-- field with hexadecimal value 0xBC. Regardless of
-- id-RSASSA-PSS-* or rsaEncryption being used as the
-- AlgorithmIdentifier of the OriginatorPublicKey, the RSA
-- public key MUST be encoded using the RSAPublicKey type.
-- From RFC4055, for reference.
-- RSAPublicKey ::= SEQUENCE {
-- modulus INTEGER, -- -- n
-- publicExponent INTEGER } -- -- e
id-ecdsa-with-shake128 OBJECT IDENTIFIER ::= { iso(1)
identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) algorithms(6) 32 }
id-ecdsa-with-shake256 OBJECT IDENTIFIER ::= { iso(1)
identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) algorithms(6) 33 }
-- When the id-ecdsa-with-shake* algorithm identifiers are
-- used in CMS, the AlgorithmIdentifier parameters field
-- MUST be absent and the signature algorithm should be
-- deterministic ECDSA [RFC6979]. The message digest MUST
-- be SHAKE128 or SHAKE256 with a 32 or 64 byte outout
-- length, respectively. In both cases, the ECDSA public key,
-- MUST be encoded using the id-ecPublicKey type.
Kampanakis & Dang Expires March 19, 2020 [Page 16]
Internet-Draft SHAKEs in CMS September 2019
-- From RFC5480, for reference.
-- id-ecPublicKey OBJECT IDENTIFIER ::= {
-- iso(1) member-body(2) us(840) ansi-X9-62(10045) keyType(2) 1 }
-- The id-ecPublicKey parameters must be absent or present
-- and are defined as
-- ECParameters ::= CHOICE {
-- namedCurve OBJECT IDENTIFIER
-- -- -- implicitCurve NULL
-- -- -- specifiedCurve SpecifiedECDomain
-- }
-- This expands SignatureAlgorithms from [RFC5912]
--
-- SignatureAlgs SIGNATURE-ALGORITHM ::= {
-- sa-rsassapssWithSHAKE128 |
-- sa-rsassapssWithSHAKE256 |
-- sa-ecdsaWithSHAKE128 |
-- sa-ecdsaWithSHAKE256,
-- ...
-- }
-- This expands MessageAuthAlgs from [RFC5652] and [RFC6268]
--
-- Message Authentication (maca-) Algorithms
-- used in AuthenticatedData macAlgorithm in CMS
--
MessageAuthAlgs MAC-ALGORITHM ::= {
maca-KMACwithSHAKE128 |
maca-KMACwithSHAKE256,
...
}
-- This expands SMimeCaps from [RFC5911]
--
SMimeCaps SMIME-CAPS ::= {
-- sa-rsassapssWithSHAKE128.&smimeCaps |
-- sa-rsassapssWithSHAKE256.&smimeCaps |
-- sa-ecdsaWithSHAKE128.&smimeCaps |
-- sa-ecdsaWithSHAKE256.&smimeCaps,
maca-KMACwithSHAKE128.&smimeCaps |
maca-KMACwithSHAKE256.&smimeCaps,
...
}
--
-- KMAC with SHAKE128
maca-KMACwithSHAKE128 MAC-ALGORITHM ::= {
IDENTIFIER id-KMACWithSHAKE128
Kampanakis & Dang Expires March 19, 2020 [Page 17]
Internet-Draft SHAKEs in CMS September 2019
PARAMS TYPE KMACwithSHAKE128-params ARE optional
-- If KMACwithSHAKE128-params parameters are absent
-- the SHAKE128 output length used in KMAC is 256 bits
-- and the customization string is an empty string.
IS-KEYED-MAC TRUE
SMIME-CAPS {IDENTIFIED BY id-KMACWithSHAKE128}
}
id-KMACWithSHAKE128 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2)
country(16) us(840) organization(1)
gov(101) csor(3) nistAlgorithm(4)
hashAlgs(2) 19 }
KMACwithSHAKE128-params ::= SEQUENCE {
kMACOutputLength INTEGER DEFAULT 256, -- Output length in bits
customizationString OCTET STRING DEFAULT ''H
}
-- KMAC with SHAKE256
maca-KMACwithSHAKE256 MAC-ALGORITHM ::= {
IDENTIFIER id-KMACWithSHAKE256
PARAMS TYPE KMACwithSHAKE256-params ARE optional
-- If KMACwithSHAKE256-params parameters are absent
-- the SHAKE256 output length used in KMAC is 512 bits
-- and the customization string is an empty string.
IS-KEYED-MAC TRUE
SMIME-CAPS {IDENTIFIED BY id-KMACWithSHAKE256}
}
id-KMACWithSHAKE256 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2)
country(16) us(840) organization(1)
gov(101) csor(3) nistAlgorithm(4)
hashAlgs(2) 20 }
KMACwithSHAKE256-params ::= SEQUENCE {
kMACOutputLength INTEGER DEFAULT 512, -- Output length in bits
customizationString OCTET STRING DEFAULT ''H
}
END
Authors' Addresses
Panos Kampanakis
Cisco Systems
Email: pkampana@cisco.com
Kampanakis & Dang Expires March 19, 2020 [Page 18]
Internet-Draft SHAKEs in CMS September 2019
Quynh Dang
NIST
100 Bureau Drive
Gaithersburg, MD 20899
Email: quynh.Dang@nist.gov
Kampanakis & Dang Expires March 19, 2020 [Page 19]
