Internet DRAFT - draft-josefsson-scrypt-kdf
draft-josefsson-scrypt-kdf
Network Working Group C. Percival
Internet-Draft Tarsnap
Intended status: Informational S. Josefsson
Expires: November 19, 2016 SJD AB
May 18, 2016
The scrypt Password-Based Key Derivation Function
draft-josefsson-scrypt-kdf-05
Abstract
This document specifies the password-based key derivation function
scrypt. The function derives one or more secret keys from a secret
string. It is based on memory-hard functions which offer added
protection against attacks using custom hardware. The document also
provides an ASN.1 schema.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on November 19, 2016.
Copyright Notice
Copyright (c) 2016 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
Percival & Josefsson Expires November 19, 2016 [Page 1]
Internet-Draft scrypt May 2016
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Scrypt Parameters . . . . . . . . . . . . . . . . . . . . . . 3
3. The Salsa20/8 Core Function . . . . . . . . . . . . . . . . . 4
4. The scryptBlockMix Algorithm . . . . . . . . . . . . . . . . 4
5. The scryptROMix Algorithm . . . . . . . . . . . . . . . . . . 5
6. The scrypt Algorithm . . . . . . . . . . . . . . . . . . . . 6
7. ASN.1 Syntax . . . . . . . . . . . . . . . . . . . . . . . . 7
7.1. ASN.1 Module . . . . . . . . . . . . . . . . . . . . . . 8
8. Test Vectors for Salsa20/8 Core . . . . . . . . . . . . . . . 9
9. Test Vectors for scryptBlockMix . . . . . . . . . . . . . . . 9
10. Test Vectors for scryptROMix . . . . . . . . . . . . . . . . 10
11. Test Vectors for PBKDF2 with HMAC-SHA-256 . . . . . . . . . . 11
12. Test Vectors for scrypt . . . . . . . . . . . . . . . . . . . 11
13. Test Vectors for PKCS#8 . . . . . . . . . . . . . . . . . . . 12
14. Copying Conditions . . . . . . . . . . . . . . . . . . . . . 13
15. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 13
16. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 13
17. Security Considerations . . . . . . . . . . . . . . . . . . . 13
18. References . . . . . . . . . . . . . . . . . . . . . . . . . 14
18.1. Normative References . . . . . . . . . . . . . . . . . . 14
18.2. Informative References . . . . . . . . . . . . . . . . . 14
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 15
1. Introduction
Password-based key derivation functions are used in cryptography and
security protocols for deriving one or more secret keys from a secret
value. Over the years, several password-based key derivation
functions have been used, including the original DES-based UNIX
Crypt-function, FreeBSD MD5 crypt, PKCS#5 PBKDF2 [RFC2898] (typically
used with SHA-1), GNU SHA-256/512 crypt [SHA2CRYPT], Windows NT LAN
Manager (NTLM) [NTLM] hash, and the Blowfish-based bcrypt [BCRYPT].
These algorithms are all based on a cryptographic primitive combined
with salting and/or iteration. The iteration count is used to slow
down the computation, and the salt is used to make pre-computation
costlier.
All password-based key derivation functions mentioned above share the
same weakness against powerful attackers. Providing that the number
of iterations used is increased as computer systems get faster, this
allows legitimate users to spend a constant amount of time on key
derivation without losing ground to an attackers' ever-increasing
computing power - as long as attackers are limited to the same
Percival & Josefsson Expires November 19, 2016 [Page 2]
Internet-Draft scrypt May 2016
software implementations as legitimate users. While parallelized
hardware implementations may not change the number of operations
performed compared to software implementations, this does not prevent
them from dramatically changing the asymptotic cost, since in many
contexts - including the embarrassingly parallel task of performing a
brute-force search for a passphrase - dollar-seconds are the most
appropriate units for measuring the cost of a computation. As
semiconductor technology develops, circuits do not merely become
faster; they also become smaller, allowing for a larger amount of
parallelism at the same cost.
Consequently, existing key derivation algorithms, even when the
iteration count is increased so that the time taken to verify a
password remains constant, the cost of finding a password by using a
brute force attack implemented in hardware drops each year.
The scrypt function aims to reduce the advantage which attackers can
gain by using custom-designed parallel circuits for breaking
password-based key derivation functions.
This document do not introduce scrypt for the first time. The
original scrypt paper [SCRYPT] was published as a peer-reviewed
scientific paper, and contains further background and discussions.
The purpose of this document is to serve as a stable reference for
IETF documents making use of scrypt. The rest of this document is
divided into sections that each describe parameter choices and
algorithm steps needed for the final "scrypt" algorithm.
2. Scrypt Parameters
The scrypt function takes several parameters. The passphrase P is
typically a human-chosen password. The salt is normally uniquely and
randomly generated [RFC4086]. The parameter r ("blockSize") specify
the block size. The CPU/Memory cost parameter N ("costParameter")
must be larger than 1, a power of 2 and less than 2^(128 * r / 8).
The parallelization parameter p ("parallelizationParameter"), a
positive integer less than or equal to ((2^32-1) * 32) / (128 * r).
The intended output length dkLen in octets of the derived key
("keyLength"); a positive integer less than or equal to (2^32 - 1) *
32.
Users of scrypt can tune the parameters N, r, and p according to the
amount of memory and computing power available, the latency-bandwidth
product of the memory subsystem, and the amount of parallelism
desired. At the current time, taking r=8 and p=1 appears to yield
good results, but as memory latency and CPU parallelism increase it
is likely that the optimum values for both r and p will increase.
Percival & Josefsson Expires November 19, 2016 [Page 3]
Internet-Draft scrypt May 2016
Note also that since the computations of SMix are independent, a
large value of p can be used to increase the computational cost of
scrypt without increasing the memory usage; so we can expect scrypt
to remain useful even if the growth rates of CPU power and memory
capacity diverge.
3. The Salsa20/8 Core Function
Salsa20/8 Core is a round-reduced variant of the Salsa20 Core. It is
a hash function from 64-octet strings to 64-octet strings. Note that
Salsa20/8 Core is not a cryptographic hash function since it is not
collision-resistant. See section 8 of [SALSA20SPEC] for its
specification, and [SALSA20CORE] for more information. The algorithm
description, in C language, is included below as a stable reference,
without endianness conversion and alignment.
#define R(a,b) (((a) << (b)) | ((a) >> (32 - (b))))
void salsa20_word_specification(uint32 out[16],uint32 in[16])
{
int i;
uint32 x[16];
for (i = 0;i < 16;++i) x[i] = in[i];
for (i = 8;i > 0;i -= 2) {
x[ 4] ^= R(x[ 0]+x[12], 7); x[ 8] ^= R(x[ 4]+x[ 0], 9);
x[12] ^= R(x[ 8]+x[ 4],13); x[ 0] ^= R(x[12]+x[ 8],18);
x[ 9] ^= R(x[ 5]+x[ 1], 7); x[13] ^= R(x[ 9]+x[ 5], 9);
x[ 1] ^= R(x[13]+x[ 9],13); x[ 5] ^= R(x[ 1]+x[13],18);
x[14] ^= R(x[10]+x[ 6], 7); x[ 2] ^= R(x[14]+x[10], 9);
x[ 6] ^= R(x[ 2]+x[14],13); x[10] ^= R(x[ 6]+x[ 2],18);
x[ 3] ^= R(x[15]+x[11], 7); x[ 7] ^= R(x[ 3]+x[15], 9);
x[11] ^= R(x[ 7]+x[ 3],13); x[15] ^= R(x[11]+x[ 7],18);
x[ 1] ^= R(x[ 0]+x[ 3], 7); x[ 2] ^= R(x[ 1]+x[ 0], 9);
x[ 3] ^= R(x[ 2]+x[ 1],13); x[ 0] ^= R(x[ 3]+x[ 2],18);
x[ 6] ^= R(x[ 5]+x[ 4], 7); x[ 7] ^= R(x[ 6]+x[ 5], 9);
x[ 4] ^= R(x[ 7]+x[ 6],13); x[ 5] ^= R(x[ 4]+x[ 7],18);
x[11] ^= R(x[10]+x[ 9], 7); x[ 8] ^= R(x[11]+x[10], 9);
x[ 9] ^= R(x[ 8]+x[11],13); x[10] ^= R(x[ 9]+x[ 8],18);
x[12] ^= R(x[15]+x[14], 7); x[13] ^= R(x[12]+x[15], 9);
x[14] ^= R(x[13]+x[12],13); x[15] ^= R(x[14]+x[13],18);
}
for (i = 0;i < 16;++i) out[i] = x[i] + in[i];
}
4. The scryptBlockMix Algorithm
The scryptBlockMix algorithm is the same as the BlockMix algorithm
described in [SCRYPT] but with Salsa20/8 Core used as the hash
Percival & Josefsson Expires November 19, 2016 [Page 4]
Internet-Draft scrypt May 2016
function H. Below, Salsa(T) corresponds to the Salsa20/8 Core
function applied to the octet vector T.
Algorithm scryptBlockMix
Parameters:
r Block size parameter.
Input:
B[0] || B[1] || ... || B[2 * r - 1]
Input octet string (of size 128 * r octets),
treated as 2 * r 64-octet blocks,
where each element in B is a 64-octet block.
Output:
B'[0] || B'[1] || ... || B'[2 * r - 1]
Output octet string.
Steps:
1. X = B[2 * r - 1]
2. for i = 0 to 2 * r - 1 do
T = X xor B[i]
X = Salsa (T)
Y[i] = X
end for
3. B' = (Y[0], Y[2], ..., Y[2 * r - 2],
Y[1], Y[3], ..., Y[2 * r - 1])
5. The scryptROMix Algorithm
The scryptROMix algorithm is the same as the ROMix algorithm
described in [SCRYPT] but with scryptBlockMix used as the hash
function H and the Integerify function explained inline.
Percival & Josefsson Expires November 19, 2016 [Page 5]
Internet-Draft scrypt May 2016
Algorithm scryptROMix
Input:
r Block size parameter.
B Input octet vector of length 128 * r octets.
N CPU/Memory cost parameter, must be larger than 1,
a power of 2 and less than 2^(128 * r / 8).
Output:
B' Output octet vector of length 128 * r octets.
Steps:
1. X = B
2. for i = 0 to N - 1 do
V[i] = X
X = scryptBlockMix (X)
end for
3. for i = 0 to N - 1 do
j = Integerify (X) mod N
where Integerify (B[0] ... B[2 * r - 1]) is defined
as the result of interpreting B[2 * r - 1] as a
little-endian integer.
T = X xor V[j]
X = scryptBlockMix (T)
end for
4. B' = X
6. The scrypt Algorithm
The PBKDF2-HMAC-SHA-256 function used below denote the PBKDF2
algorithm [RFC2898] used with HMAC-SHA-256 [RFC6234] as the PRF. The
HMAC-SHA-256 function generates 32 octet outputs.
Percival & Josefsson Expires November 19, 2016 [Page 6]
Internet-Draft scrypt May 2016
Algorithm scrypt
Input:
P Passphrase, an octet string.
S Salt, an octet string.
N CPU/Memory cost parameter, must be larger than 1,
a power of 2 and less than 2^(128 * r / 8).
r Block size parameter.
p Parallelization parameter, a positive integer
less than or equal to ((2^32-1) * hLen) / MFLen
where hLen is 32 and MFlen is 128 * r.
dkLen Intended output length in octets of the derived
key; a positive integer less than or equal to
(2^32 - 1) * hLen where hLen is 32.
Output:
DK Derived key, of length dkLen octets.
Steps:
1. Initialize an array B consisting of p blocks of 128 * r octets each:
B[0] || B[1] || ... || B[p - 1] =
PBKDF2-HMAC-SHA256 (P, S, 1, p * 128 * r)
2. for i = 0 to p - 1 do
B[i] = scryptROMix (r, B[i], N)
end for
3. DK = PBKDF2-HMAC-SHA256 (P, B[0] || B[1] || ... || B[p - 1],
1, dkLen)
7. ASN.1 Syntax
This section defines ASN.1 syntax for the scrypt key derivation
function. This is intended to operate on the same abstraction level
as PKCS#5's PBKDF2. The OID id-scrypt below can be used where id-
PBKDF2 is used, with scrypt-params corresponding to PBKDF2-params.
The intended application of these definitions includes PKCS #8 and
other syntax for key management.
The object identifier id-scrypt identifies the scrypt key derivation
function.
id-scrypt OBJECT IDENTIFIER ::= {1 3 6 1 4 1 11591 4 11}
The parameters field associated with this OID in an
AlgorithmIdentifier shall have type scrypt-params:
Percival & Josefsson Expires November 19, 2016 [Page 7]
Internet-Draft scrypt May 2016
scrypt-params ::= SEQUENCE {
salt OCTET STRING,
costParameter INTEGER (1..MAX),
blockSize INTEGER (1..MAX),
parallelizationParameter INTEGER (1..MAX),
keyLength INTEGER (1..MAX) OPTIONAL }
The fields of type scrypt-params have the following meanings:
- salt specifies the salt value. It shall be an octet string.
- costParameter specifies the CPU/Memory cost parameter N.
- blockSize specifies the block size parameter r.
- parallelizationParameter specifies the parallelization parameter.
- keyLength, an optional field, is the length in octets of the
derived key. The maximum key length allowed depends on the
implementation; it is expected that implementation profiles may
further constrain the bounds. This field only provides convenience;
the key length is not cryptographically protected.
To be usable in PKCS#8 [RFC5208] and Asymmetric Key Packages
[RFC5958] the following extension of the PBES2-KDFs type is needed.
PBES2-KDFs ALGORITHM-IDENTIFIER ::=
{ {scrypt-params IDENTIFIED BY id-scrypt}, ... }
7.1. ASN.1 Module
For reference purposes, the ASN.1 syntax is presented as an ASN.1
module here.
Percival & Josefsson Expires November 19, 2016 [Page 8]
Internet-Draft scrypt May 2016
-- scrypt ASN.1 Module
scrypt-0 {1 3 6 1 4 1 11591 4 10}
DEFINITIONS ::= BEGIN
id-scrypt OBJECT IDENTIFIER ::= {1 3 6 1 4 1 11591 4 11}
scrypt-params ::= SEQUENCE {
salt OCTET STRING,
costParameter INTEGER (1..MAX),
blockSize INTEGER (1..MAX),
parallelizationParameter INTEGER (1..MAX),
keyLength INTEGER (1..MAX) OPTIONAL
}
PBES2-KDFs ALGORITHM-IDENTIFIER ::=
{ {scrypt-params IDENTIFIED BY id-scrypt}, ... }
END
8. Test Vectors for Salsa20/8 Core
Below is a sequence of octets to illustrate input and output values
for the Salsa20/8 Core. The octets are hex encoded and whitespace is
inserted for readability. The value corresponds to the first input
and output pair generated by the first scrypt test vector below.
INPUT:
7e 87 9a 21 4f 3e c9 86 7c a9 40 e6 41 71 8f 26
ba ee 55 5b 8c 61 c1 b5 0d f8 46 11 6d cd 3b 1d
ee 24 f3 19 df 9b 3d 85 14 12 1e 4b 5a c5 aa 32
76 02 1d 29 09 c7 48 29 ed eb c6 8d b8 b8 c2 5e
OUTPUT:
a4 1f 85 9c 66 08 cc 99 3b 81 ca cb 02 0c ef 05
04 4b 21 81 a2 fd 33 7d fd 7b 1c 63 96 68 2f 29
b4 39 31 68 e3 c9 e6 bc fe 6b c5 b7 a0 6d 96 ba
e4 24 cc 10 2c 91 74 5c 24 ad 67 3d c7 61 8f 81
9. Test Vectors for scryptBlockMix
Below is a sequence of octets to illustrate input and output values
for scryptBlockMix. The test vector uses an r value of 1. The
octets are hex encoded and whitespace is inserted for readability.
The value corresponds to the first input and output pair generated by
the first scrypt test vector below.
Percival & Josefsson Expires November 19, 2016 [Page 9]
Internet-Draft scrypt May 2016
INPUT
B[0] = f7 ce 0b 65 3d 2d 72 a4 10 8c f5 ab e9 12 ff dd
77 76 16 db bb 27 a7 0e 82 04 f3 ae 2d 0f 6f ad
89 f6 8f 48 11 d1 e8 7b cc 3b d7 40 0a 9f fd 29
09 4f 01 84 63 95 74 f3 9a e5 a1 31 52 17 bc d7
B[1] = 89 49 91 44 72 13 bb 22 6c 25 b5 4d a8 63 70 fb
cd 98 43 80 37 46 66 bb 8f fc b5 bf 40 c2 54 b0
67 d2 7c 51 ce 4a d5 fe d8 29 c9 0b 50 5a 57 1b
7f 4d 1c ad 6a 52 3c da 77 0e 67 bc ea af 7e 89
OUTPUT
B'[0] = a4 1f 85 9c 66 08 cc 99 3b 81 ca cb 02 0c ef 05
04 4b 21 81 a2 fd 33 7d fd 7b 1c 63 96 68 2f 29
b4 39 31 68 e3 c9 e6 bc fe 6b c5 b7 a0 6d 96 ba
e4 24 cc 10 2c 91 74 5c 24 ad 67 3d c7 61 8f 81
B'[1] = 20 ed c9 75 32 38 81 a8 05 40 f6 4c 16 2d cd 3c
21 07 7c fe 5f 8d 5f e2 b1 a4 16 8f 95 36 78 b7
7d 3b 3d 80 3b 60 e4 ab 92 09 96 e5 9b 4d 53 b6
5d 2a 22 58 77 d5 ed f5 84 2c b9 f1 4e ef e4 25
10. Test Vectors for scryptROMix
Below is a sequence of octets to illustrate input and output values
for scryptROMix. The test vector uses an r value of 1 and an N value
of 16. The octets are hex encoded and whitespace is inserted for
readability. The value corresponds to the first input and output
pair generated by the first scrypt test vector below.
Percival & Josefsson Expires November 19, 2016 [Page 10]
Internet-Draft scrypt May 2016
INPUT:
B = f7 ce 0b 65 3d 2d 72 a4 10 8c f5 ab e9 12 ff dd
77 76 16 db bb 27 a7 0e 82 04 f3 ae 2d 0f 6f ad
89 f6 8f 48 11 d1 e8 7b cc 3b d7 40 0a 9f fd 29
09 4f 01 84 63 95 74 f3 9a e5 a1 31 52 17 bc d7
89 49 91 44 72 13 bb 22 6c 25 b5 4d a8 63 70 fb
cd 98 43 80 37 46 66 bb 8f fc b5 bf 40 c2 54 b0
67 d2 7c 51 ce 4a d5 fe d8 29 c9 0b 50 5a 57 1b
7f 4d 1c ad 6a 52 3c da 77 0e 67 bc ea af 7e 89
OUTPUT:
B = 79 cc c1 93 62 9d eb ca 04 7f 0b 70 60 4b f6 b6
2c e3 dd 4a 96 26 e3 55 fa fc 61 98 e6 ea 2b 46
d5 84 13 67 3b 99 b0 29 d6 65 c3 57 60 1f b4 26
a0 b2 f4 bb a2 00 ee 9f 0a 43 d1 9b 57 1a 9c 71
ef 11 42 e6 5d 5a 26 6f dd ca 83 2c e5 9f aa 7c
ac 0b 9c f1 be 2b ff ca 30 0d 01 ee 38 76 19 c4
ae 12 fd 44 38 f2 03 a0 e4 e1 c4 7e c3 14 86 1f
4e 90 87 cb 33 39 6a 68 73 e8 f9 d2 53 9a 4b 8e
11. Test Vectors for PBKDF2 with HMAC-SHA-256
Below is a sequence of octets illustring input and output values for
PBKDF2-HMAC-SHA-256. The octets are hex encoded and whitespace is
inserted for readability. The test vectors below can be used to
verify the PBKDF2-HMAC-SHA-256 [RFC2898] function. The password and
salt strings are passed as sequences of ASCII [RFC0020] octets.
PBKDF2-HMAC-SHA-256 (P="passwd", S="salt",
c=1, dkLen=64) =
55 ac 04 6e 56 e3 08 9f ec 16 91 c2 25 44 b6 05
f9 41 85 21 6d de 04 65 e6 8b 9d 57 c2 0d ac bc
49 ca 9c cc f1 79 b6 45 99 16 64 b3 9d 77 ef 31
7c 71 b8 45 b1 e3 0b d5 09 11 20 41 d3 a1 97 83
PBKDF2-HMAC-SHA-256 (P="Password", S="NaCl",
c=80000, dkLen=64) =
4d dc d8 f6 0b 98 be 21 83 0c ee 5e f2 27 01 f9
64 1a 44 18 d0 4c 04 14 ae ff 08 87 6b 34 ab 56
a1 d4 25 a1 22 58 33 54 9a db 84 1b 51 c9 b3 17
6a 27 2b de bb a1 d0 78 47 8f 62 b3 97 f3 3c 8d
12. Test Vectors for scrypt
For reference purposes, we provide the following test vectors for
scrypt, where the password and salt strings are passed as sequences
of ASCII [RFC0020] octets.
Percival & Josefsson Expires November 19, 2016 [Page 11]
Internet-Draft scrypt May 2016
The parameters to the scrypt function below are, in order, the
password P (octet string), the salt S (octet string), the CPU/Memory
cost parameter N, the block size parameter r, and the parallelization
parameter p, and the output size dkLen. The output is hex encoded
and whitespace is inserted for readability.
scrypt (P="", S="",
N=16, r=1, p=1, dklen=64) =
77 d6 57 62 38 65 7b 20 3b 19 ca 42 c1 8a 04 97
f1 6b 48 44 e3 07 4a e8 df df fa 3f ed e2 14 42
fc d0 06 9d ed 09 48 f8 32 6a 75 3a 0f c8 1f 17
e8 d3 e0 fb 2e 0d 36 28 cf 35 e2 0c 38 d1 89 06
scrypt (P="password", S="NaCl",
N=1024, r=8, p=16, dkLen=64) =
fd ba be 1c 9d 34 72 00 78 56 e7 19 0d 01 e9 fe
7c 6a d7 cb c8 23 78 30 e7 73 76 63 4b 37 31 62
2e af 30 d9 2e 22 a3 88 6f f1 09 27 9d 98 30 da
c7 27 af b9 4a 83 ee 6d 83 60 cb df a2 cc 06 40
scrypt (P="pleaseletmein", S="SodiumChloride",
N=16384, r=8, p=1, dkLen=64) =
70 23 bd cb 3a fd 73 48 46 1c 06 cd 81 fd 38 eb
fd a8 fb ba 90 4f 8e 3e a9 b5 43 f6 54 5d a1 f2
d5 43 29 55 61 3f 0f cf 62 d4 97 05 24 2a 9a f9
e6 1e 85 dc 0d 65 1e 40 df cf 01 7b 45 57 58 87
scrypt (P="pleaseletmein", S="SodiumChloride",
N=1048576, r=8, p=1, dkLen=64) =
21 01 cb 9b 6a 51 1a ae ad db be 09 cf 70 f8 81
ec 56 8d 57 4a 2f fd 4d ab e5 ee 98 20 ad aa 47
8e 56 fd 8f 4b a5 d0 9f fa 1c 6d 92 7c 40 f4 c3
37 30 40 49 e8 a9 52 fb cb f4 5c 6f a7 7a 41 a4
13. Test Vectors for PKCS#8
PKCS#8 [RFC5208] and Asymmetric Key Packages [RFC5958] encode
encrypted private-keys. Using PBES2 with scrypt as the KDF, the
following illustrates an example of a PKCS#8 encoded private-key.
The password is "Rabbit" (without the quotes) with N=1048576, r=8 and
p=1. The salt is "Mouse" and the encryption algorithm used is
aes256-CBC. The derived key is: E2 77 EA 2C AC B2 3E DA-FC 03 9D 22
9B 79 DC 13 EC ED B6 01 D9 9B 18 2A-9F ED BA 1E 2B FB 4F 58.
Percival & Josefsson Expires November 19, 2016 [Page 12]
Internet-Draft scrypt May 2016
-----BEGIN ENCRYPTED PRIVATE KEY-----
MIHiME0GCSqGSIb3DQEFDTBAMB8GCSsGAQQB2kcECzASBAVNb3VzZQIDEAAAAgEI
AgEBMB0GCWCGSAFlAwQBKgQQyYmguHMsOwzGMPoyObk/JgSBkJb47EWd5iAqJlyy
+ni5ftd6gZgOPaLQClL7mEZc2KQay0VhjZm/7MbBUNbqOAXNM6OGebXxVp6sHUAL
iBGY/Dls7B1TsWeGObE0sS1MXEpuREuloZjcsNVcNXWPlLdZtkSH6uwWzR0PyG/Z
+ZXfNodZtd/voKlvLOw5B3opGIFaLkbtLZQwMiGtl42AS89lZg==
-----END ENCRYPTED PRIVATE KEY-----
14. Copying Conditions
The authors agree to grant third parties the irrevocable right to
copy, use and distribute this entire document or any portion of it,
with or without modification, in any medium, without royalty,
provided that, unless separate permission is granted, redistributed
modified works do not contain misleading author, version, name of
work, or endorsement information.
15. Acknowledgements
Text in this document was borrowed from [SCRYPT] and [RFC2898]. The
PKCS#8 test vector was provided by Stephen N. Henson.
Feedback on this document were received from Dmitry Chestnykh,
Alexander Klink, Rob Kendrick, Royce Williams Ted Rolle, Jr., Eitan
Adler, Stephen Farrel, Nikos Mavrogiannopoulos, and Paul Kyzivat.
16. IANA Considerations
None.
17. Security Considerations
This document specifies a cryptographic algorithm, and there is
always a risk that someone will find a weakness in it. By following
the cryptographic research area you may learn of publications
relevant to scrypt.
ROMix has been proven sequential memory-hard under the Random Oracle
model for the hash function. The security of scrypt relies on the
assumption that BlockMix with Salsa20/8 Core does not exhibit any
"shortcuts" which would allow it to be iterated more easily than a
random oracle. For other claims about the security properties see
[SCRYPT].
Passwords and other sensitive data, such as intermediate values, may
continue to be stored in memory, core dumps, swap areas, etc, for a
long time after the implementation has processed them. This makes
attacks on the implementation easier. Thus, implementation should
Percival & Josefsson Expires November 19, 2016 [Page 13]
Internet-Draft scrypt May 2016
consider storing sensitive data in protected memory areas. How to
achieve this is system dependent.
By nature and depending on parameters, running the scrypt algorithm
may require large amounts of memory. Systems should protect against
a denial of service attack resulting from attackers presenting
unreasonably large parameters.
Poor parameter choices can be harmful for security; for example, if
you tune the parameters so that memory use is reduced to small
amounts that will affect the properties of the algorithm.
18. References
18.1. Normative References
[RFC2898] Kaliski, B., "PKCS #5: Password-Based Cryptography
Specification Version 2.0", RFC 2898,
DOI 10.17487/RFC2898, September 2000,
<http://www.rfc-editor.org/info/rfc2898>.
[RFC6234] Eastlake 3rd, D. and T. Hansen, "US Secure Hash Algorithms
(SHA and SHA-based HMAC and HKDF)", RFC 6234,
DOI 10.17487/RFC6234, May 2011,
<http://www.rfc-editor.org/info/rfc6234>.
18.2. Informative References
[RFC0020] Cerf, V., "ASCII format for network interchange", STD 80,
RFC 20, DOI 10.17487/RFC0020, October 1969,
<http://www.rfc-editor.org/info/rfc20>.
[RFC5208] Kaliski, B., "Public-Key Cryptography Standards (PKCS) #8:
Private-Key Information Syntax Specification Version 1.2",
RFC 5208, DOI 10.17487/RFC5208, May 2008,
<http://www.rfc-editor.org/info/rfc5208>.
[RFC5958] Turner, S., "Asymmetric Key Packages", RFC 5958,
DOI 10.17487/RFC5958, August 2010,
<http://www.rfc-editor.org/info/rfc5958>.
[RFC4086] Eastlake 3rd, D., Schiller, J., and S. Crocker,
"Randomness Requirements for Security", BCP 106, RFC 4086,
DOI 10.17487/RFC4086, June 2005,
<http://www.rfc-editor.org/info/rfc4086>.
Percival & Josefsson Expires November 19, 2016 [Page 14]
Internet-Draft scrypt May 2016
[SALSA20SPEC]
Bernstein, D., "Salsa20 specification",
WWW http://cr.yp.to/snuffle/spec.pdf, April 2005.
[SALSA20CORE]
Bernstein, D., "The Salsa20 Core",
WWW http://cr.yp.to/salsa20.html, March 2005.
[SCRYPT] Percival, C., "Stronger key derivation via sequential
memory-hard functions",
BSDCan'09 http://www.tarsnap.com/scrypt/scrypt.pdf, May
2009.
[BCRYPT] Provos, N. and D. Mazieres, "A Future-Adaptable Password
Scheme", USENIX 1999
https://www.usenix.org/legacy/event/usenix99/provos/
provos.pdf, June 1999.
[NTLM] "[MS-NLMP]: NT LAN Manager (NTLM) Authentication
Protocol", Microsoft https://msdn.microsoft.com/en-
us/library/cc236621.aspx, 2015.
[SHA2CRYPT]
Drepper, U., "Unix crypt using SHA-256 and SHA-512",
URL http://www.akkadia.org/drepper/SHA-crypt.txt, April
2008.
Authors' Addresses
Colin Percival
Tarsnap
Email: cperciva@tarsnap.com
Simon Josefsson
SJD AB
Email: simon@josefsson.org
URI: http://josefsson.org/
Percival & Josefsson Expires November 19, 2016 [Page 15]
