rfc2586









Network Working Group                                     J. Salsman
Request for Comments: 2586                             H. Alvestrand
Category: Informational                                      UNINETT
                                                            May 1999


                    The Audio/L16 MIME content type

Status of this Memo

   This memo provides information for the Internet community.  It does
   not specify an Internet standard of any kind.  Distribution of this
   memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (1999).  All Rights Reserved.

1.  Introduction

   This document defines the audio/L16 MIME type, a reasonable quality
   audio format for use in Internet applications.

   Possible application areas include E-mail, Web served content, file
   upload in Web forms, and more.

2.  The need for the Audio/L16 MIME type

   The set of IETF standard MIME types for audio is small; it consists
   of only the audio/basic and audio/32kadpcm types, which have a
   sampling rate of 8000 samples/second.

   Rates below 11025 may obscure consonant information, even for
   single-voice speech.  Common compressions, such as LPC, are known to
   be microphone-dependant and lossy.  Thus far all IETF MIME Audio
   types either default to 8000 samples per second or use LPC.

   In order for advanced speech recognition and related educational
   applications to make use of internet transports (such as RFC 1867
   file uploading) which use MIME typing, higher standards are required.

   This type repairs that lack by registering a very simple MIME type
   that allows higher rate, linear-encoded audio with multiple channels.

   This is an IESG approved MIME type, and its definition is therefore
   published as an RFC.





Salsman                      Informational                      [Page 1]

RFC 2586            The Audio/L16 MIME content type             May 1999


   Please note that there are many other Audio types described in RFC
   1890 [1] which IANA may wish to formally register; this one, of all
   of them, seems to be most immediately needed.  This document may also
   serve as a template for further registrations of these audio types.

3.  The definition of Audio/L16

   Audio/L16 is based on the well know audio format "L16" described in
   RFC 1890 section 4.4.8 for use with RTP transport.  L16 denotes
   uncompressed audio data, using 16-bit signed representation in twos-
   complement notation and network byte order.  (From section 4.4.8 of
   RFC 1890)

   It may be parametrized by varying the sample rate and the number of
   channels; the parameters are given on the MIME type header.

   In order to promote interoperability, only a few rate values are
   standardized here. Other values may NOT be used except by bilateral
   agreement.

   If multiple audio channels are used, channels are numbered left-to-
   right, starting at one. Samples are put into the data stream from
   each channel in succession; information from lower-numbered channels
   precedes that from higher-numbered channels.

   For more than two channels, the convention followed by the AIFF-C
   audio interchange format should be followed [1], using the following
   notation:

      l    left
      r    right
      c    center
      S    surround
      F    front
      R    rear

      channels    description                 channel
                                  1     2     3     4     5     6
      ___________________________________________________________
      2           stereo          l     r
      3                           l     r     c
      4           quadrophonic    Fl    Fr    Rl    Rr
      4                           l     c     r     S
      5                           Fl    Fr    Fc    Sl    Sr
      6                           l     lc    c     r     rc    S

   (From RFC 1890 section 4.1)




Salsman                      Informational                      [Page 2]

RFC 2586            The Audio/L16 MIME content type             May 1999


4.  IANA registration form for Audio/L16

   MIME media type name : Audio
   MIME subtype name : L16

   Required parameters
        rate: number of samples per second -- Permissible values for
        rate are 8000, 11025, 16000, 22050, 24000, 32000, 44100, and
        48000 samples per second.

   Optional parameters
        channels: how many audio streams are interleaved -- defaults
        to 1; stereo would be 2, etc.  Interleaving takes place
        between individual two-byte samples.

   Encoding considerations
        Audio data is binary data, and must be encoded for non-binary
        transport; the Base64 encoding is suitable for Email.  Note
        that audio data does not compress easily using lossless
        compression.

   Security considerations
        Audio data is believed to offer no security risks.

   Interoperability considerations
        This type is compatible with the encoding used in the WAV
        (Microsoft Windows RIFF) and Apple AIFF union types, and with
        the public domain "sox" and "rateconv" programs.

   Published specification
        RFC 2586

   Applications which use this media
        The public domain "sox" and "rateconv" programs accept this
        type.

        1. Magic number(s) : None
        2. File extension(s) : WAV L16
        3. Macintosh file type code : AIFF

   Person to contact for further information

        1. Name : James Salsman
        2. E-mail : jps-L16@bovik.org

   Intended usage
        Common




Salsman                      Informational                      [Page 3]

RFC 2586            The Audio/L16 MIME content type             May 1999


        It is expected that many audio and speech applications will use
        this type.  Already the most popular platforms provide this type
        with the rate=11025 parameter referred to as "radio quality
        speech."

   Author/Change controller
        James Salsman

5.  Security considerations

   The audio data is believed to offer no security risks.

   Note that RFC 1890 permits an application to choose to play a single
   channel from a multichannel tranmission; an attacker who knows that
   two different users will pick different channels could concievably
   construct some confusing messages; this, however, is ridiculous.

   This type is perfect for hiding data using steganography.

6.  References

   [1]  Schulzrinne, H., "RTP Profile for Audio and Video Conferences
        with Minimal Control", RFC 1890, January 1996.

7.  Authors' Addresses

   James Salsman
   575 S. Rengstorff Avenue
   Mountain View, CA  94040-1982 US

   EMail: James@bovik.org


   Harald Tveit Alvestrand
   UNINETT
   N-7034 TRONDHEIM
   NORWAY

   Phone: +47 73 59 70 94
   EMail: Harald.T.Alvestrand@uninett.no











Salsman                      Informational                      [Page 4]

RFC 2586            The Audio/L16 MIME content type             May 1999


8.  Full Copyright Statement

   Copyright (C) The Internet Society (1999).  All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.



















Salsman                      Informational                      [Page 5]



ERRATA