rfc3805









Network Working Group                                         R. Bergman
Request for Comments: 3805                    Hitachi Printing Solutions
Obsoletes: 1759                                                 H. Lewis
Category: Standards Track                                IBM Corporation
                                                             I. McDonald
                                                         High North Inc.
                                                               June 2004


                             Printer MIB v2

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2004).

Abstract

   This document provides definitions of models and manageable objects
   for printing environments.  The objects included in this MIB apply to
   physical, as well as logical entities within a printing device.  This
   document obsoletes RFC 1759.






















Bergman, et al.             Standards Track                     [Page 1]

RFC 3805                     Printer MIB v2                    June 2004


Table of Contents

   1.  Introduction. . . . . . . . . . . . . . . . . . . . . . . . .   4
       1.1.  Network Printing Environment. . . . . . . . . . . . . .   4
       1.2.  Printer Device Overview . . . . . . . . . . . . . . . .   6
       1.3.  Categories of Printer Information . . . . . . . . . . .   6
             1.3.1.  Descriptions. . . . . . . . . . . . . . . . . .   6
             1.3.2.  Status. . . . . . . . . . . . . . . . . . . . .   6
             1.3.3.  Alerts. . . . . . . . . . . . . . . . . . . . .   6
       1.4.  The Internet-Standard Management Framework. . . . . . .   7
       1.5.  Requirement Levels. . . . . . . . . . . . . . . . . . .   7
   2.  Printer Model . . . . . . . . . . . . . . . . . . . . . . . .   8
       2.1.  Overview of the Printer Model . . . . . . . . . . . . .  10
       2.2.  Printer Sub-Units . . . . . . . . . . . . . . . . . . .  10
             2.2.1.  General Printer . . . . . . . . . . . . . . . .  10
                     2.2.1.1.  International Considerations. . . . .  10
             2.2.2.  Inputs. . . . . . . . . . . . . . . . . . . . .  11
             2.2.3.  Media . . . . . . . . . . . . . . . . . . . . .  12
             2.2.4.  Outputs . . . . . . . . . . . . . . . . . . . .  12
             2.2.5.  Finishers . . . . . . . . . . . . . . . . . . .  12
             2.2.6.  Markers . . . . . . . . . . . . . . . . . . . .  13
             2.2.7.  Media Paths . . . . . . . . . . . . . . . . . .  13
             2.2.8.  System Controller . . . . . . . . . . . . . . .  14
             2.2.9.  Interfaces. . . . . . . . . . . . . . . . . . .  14
             2.2.10. Print Job Delivery Channels . . . . . . . . . .  14
             2.2.11. Interpreters. . . . . . . . . . . . . . . . . .  15
             2.2.12. Console . . . . . . . . . . . . . . . . . . . .  15
             2.2.13. Alerts. . . . . . . . . . . . . . . . . . . . .  15
                     2.2.13.1. Status and Alerts . . . . . . . . . .  16
                     2.2.13.2. Overall Printer Status. . . . . . . .  16
                               2.2.13.2.1. Host Resources MIB
                                           Printer Status. . . . . .  18
                               2.2.13.2.2. Sub-unit Status . . . . .  20
                     2.2.13.3. Alert Tables. . . . . . . . . . . . .  21
                     2.2.13.4. Alert Table Management. . . . . . . .  21
       2.3.  Read-Write Objects. . . . . . . . . . . . . . . . . . .  23
       2.4.  Enumerations. . . . . . . . . . . . . . . . . . . . . .  24
             2.4.1.  Registering Additional Enumerated Values. . . .  25
   3.  Groups from other MIB Specifications. . . . . . . . . . . . .  25
       3.1.  System Group. . . . . . . . . . . . . . . . . . . . . .  25
       3.2.  System Controller . . . . . . . . . . . . . . . . . . .  25
       3.3.  Interface Group objects . . . . . . . . . . . . . . . .  26
             3.3.1.  Interface Types . . . . . . . . . . . . . . . .  26
   4.  Differences from RFC 1759 . . . . . . . . . . . . . . . . . .  26
   5.  The IANA Printer MIB. . . . . . . . . . . . . . . . . . . . .  29
   6.  The Printer MIB . . . . . . . . . . . . . . . . . . . . . . .  56
       -- Textual conventions for this MIB module. . . . . . . . . .  59
       -- The General Printer Group. . . . . . . . . . . . . . . . .  67



Bergman, et al.             Standards Track                     [Page 2]

RFC 3805                     Printer MIB v2                    June 2004


       -- The Responsible Party group. . . . . . . . . . . . . . . .  70
       -- The Auxiliary Sheet Group. . . . . . . . . . . . . . . . .  73
       -- Administrative section  (The General V2 Group) . . . . . .  74
       -- General alert table section  (Alert Table V2 Group). . . .  74
       -- The Cover Table. . . . . . . . . . . . . . . . . . . . . .  75
       -- The Localization Table . . . . . . . . . . . . . . . . . .  76
       -- The System Resources Tables. . . . . . . . . . . . . . . .  78
       -- The Input Group. . . . . . . . . . . . . . . . . . . . . .  81
       -- The Extended Input Group . . . . . . . . . . . . . . . . .  86
       -- The Input Media Group. . . . . . . . . . . . . . . . . . .  87
       -- The Input Switching Group. . . . . . . . . . . . . . . . .  89
       -- The Output Group . . . . . . . . . . . . . . . . . . . . .  90
       -- The Extended Output Group. . . . . . . . . . . . . . . . .  93
       -- The Output Dimensions Group. . . . . . . . . . . . . . . .  95
       -- The Output Features Group. . . . . . . . . . . . . . . . .  97
       -- The Marker Group . . . . . . . . . . . . . . . . . . . . .  98
       -- The Marker Supplies Group. . . . . . . . . . . . . . . . . 104
       -- The Marker Colorant Group. . . . . . . . . . . . . . . . . 107
       -- The Media Path Group . . . . . . . . . . . . . . . . . . . 109
       -- The Print Job Delivery Channel Group . . . . . . . . . . . 113
       -- The Interpreter Group. . . . . . . . . . . . . . . . . . . 115
       -- The Console Group. . . . . . . . . . . . . . . . . . . . . 120
       -- The Alerts Group . . . . . . . . . . . . . . . . . . . . . 125
       -- Conformance Information. . . . . . . . . . . . . . . . . . 129
   7.  IANA Considerations . . . . . . . . . . . . . . . . . . . . . 147
   8.  Internationalization Considerations . . . . . . . . . . . . . 147
   9.  Security Considerations . . . . . . . . . . . . . . . . . . . 148
   10. References. . . . . . . . . . . . . . . . . . . . . . . . . . 150
       10.1. Normative References. . . . . . . . . . . . . . . . . . 150
       10.2. Informative References. . . . . . . . . . . . . . . . . 151
   Appendix A - Glossary of Terms. . . . . . . . . . . . . . . . . . 153
   Appendix B - Media Size Names . . . . . . . . . . . . . . . . . . 156
   Appendix C - Media Names. . . . . . . . . . . . . . . . . . . . . 158
   Appendix D - Roles of Users . . . . . . . . . . . . . . . . . . . 162
   Appendix E - Overall Printer Status Table . . . . . . . . . . . . 165
   Appendix F - Participants . . . . . . . . . . . . . . . . . . . . 166
   Significant Contributors. . . . . . . . . . . . . . . . . . . . . 168
   Authors' Addresses. . . . . . . . . . . . . . . . . . . . . . . . 170
   Full Copyright Statement. . . . . . . . . . . . . . . . . . . . . 171












Bergman, et al.             Standards Track                     [Page 3]

RFC 3805                     Printer MIB v2                    June 2004


1.  Introduction

1.1.  Network Printing Environment

   The management of producing a printed document, in any computer
   environment, is a complex subject.  Basically, the task can be
   divided into two overlapping pieces, the management of printing and
   the management of the printer.  Printing encompasses the entire
   process of producing a printed document from generation of the file
   to be printed, selection of a printer, choosing printing properties,
   routing, queuing, resource management, scheduling, and final printing
   including notifying the user.  Most of the printing process is
   outside the scope of the model presented here; only the management of
   the printer is covered.





































Bergman, et al.             Standards Track                     [Page 4]

RFC 3805                     Printer MIB v2                    June 2004


              Figure 1 - One Printer's View of the Network

    system   printer    asset     user          user           user
    manager  operator   manager
      O         O         O         O             O              O
     /|\       /|\       /|\       /|\           /|\            /|\
     / \       / \       / \       / \           / \            / \
      |         |         |         |             |              |
+---------+ +-------+ +-------+ +-------+   +-----------+ +-----------+
|configur-| |printer| | asset | |printer|   |   user    | |   user    |
|ator     | |manager| |manager| |browser|   |application| |application|
+---------+ +-------+ +-------+ +-------+   +-----------+ +-----------+
   ^            ^         ^         ^             |             |
   |R/W         |R/W      |R        |R      +-----------+ +-----------+
   |            |         |         |       |  spooler  | |  spooler  |
   |            |         |         |       +-----------+ +-----------+
   |            |         |         |             |             |
   |            |         |         |       +-----------+ +-----------+
   |            |         |         |       |supervisor | |supervisor |
   |            |         |         |       +-----------+ +-----------+
   |            |         |         |        ^       ^     ^       ^
   |            |         |         |        |R      |R/W  |R      |R/W
   v            v         |         |        |       |     |       |
==================================================   |   =====     |
                     |                          print|        print|
                     |SNMP                       data|         data|
  +-----+        +-------+                        PCL|          PCL|
  | MIB |<------>| agent |                 PostScript|   PostScript|
  +-----+        +-------+                       NPAP|         NPAP|
                     |unspecified                etc.|         etc.|
              +=============+  +-----------------+   |             |
              |             |--|channel/interface|<--+             |
              |             |  +-----------------+                 |
              |   PRINTER   |                                      |
              |             |  +-----------------+                 |
              |             |--|channel/interface|<----------------+
              +=============+  +-----------------+














Bergman, et al.             Standards Track                     [Page 5]

RFC 3805                     Printer MIB v2                    June 2004


1.2.  Printer Device Overview

   A printer is the physical device that takes media from an input
   source, produces marks on that media according to some page
   description or page control language and puts the result in some
   output destination, possibly with finishing applied.  Printers are
   complex devices that consume supplies, produce waste and may have
   mechanical problems.  In the management of the physical device the
   description, status and alert information concerning the printer and
   its various subparts has to be made available to the management
   application so that it can be reported to the end user, key operators
   for the replenishment of supplies or the repair or maintenance of the
   device.  The information needed in the management of the physical
   printer and the management of a printing job overlap highly and many
   of the tasks in each management area require the same or similar
   information.

1.3.  Categories of Printer Information

   Information about printers is classified into three basic categories:
   descriptions, status and alerts.

1.3.1.  Descriptions

   Descriptions convey information about the configuration and
   capabilities of the printer and its various sub-units.  This
   information is largely static information and does not generally
   change during the operation of the system but may change as the
   printer is repaired, reconfigured or upgraded.  The descriptions are
   one part of the visible state of the printer where state means the
   condition of being of the printer at any point in time.

1.3.2.  Status

   Status is the information regarding the current operating state of
   the printer and its various sub-units.  As an example of the use of
   status, a management application must be able to determine if the
   various sub-units are ready to print or are in some state that
   prevents printing or may prevent printing in the future.

1.3.3.  Alerts

   An Alert is the representation of a reportable event in the printer.
   An event is a change in the state of the printer.  Some of those
   state changes are of interest to a management application and are
   therefore reportable.  Typically, these are the events that affect
   the printer's ability to print.  Alerts usually occur asynchronously
   to the operation of the computer system(s) to which the printer is



Bergman, et al.             Standards Track                     [Page 6]

RFC 3805                     Printer MIB v2                    June 2004


   attached. For convenience below, "alert" will be used for both the
   event caused by a change in the printer's state and for the
   representation of that event.

   Alerts can be classified into two basic categories, critical and non-
   critical.  A critical alert is one that is triggered by entry into a
   state in which the printer is stopped and printing can not continue
   until the condition that caused the critical alert is eliminated.
   "Out of paper", "toner empty" and "output bin full" are examples of
   critical alerts.  Non-critical alerts are triggered by those events
   that enter a state in which printing is not stopped.  Such a non-
   critical state may, at some future time, lead to a state in which
   printing may be stopped.  Examples of these kinds of non-critical
   alerts are "input media low", "toner low" and "output bin nearly
   full".  Or, a non-critical alert may simply provide information, such
   as signaling a configuration changed in the printer.

   Description, status and alert information about the printer can be
   thought of as a database describing the printer.  The management
   application for a printer will want to view the printer data base
   differently depending on how and for what purposes the information in
   the database is needed.

1.4.  The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
   [RFC2580].

1.5.  Requirement Levels

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   Compliant implementations must follow this specification.






Bergman, et al.             Standards Track                     [Page 7]

RFC 3805                     Printer MIB v2                    June 2004


2.  Printer Model

   In order to accomplish the management of the printer, an abstract
   model of the printer is needed to represent the sub-units from which
   the printer is composed.  A printer can be described as consisting of
   13 types of sub-units.  It is important to note that the sub-units of
   a printer do not necessarily relate directly to any physically
   identifiable mechanism.  Sub-units can also be a set of definable
   logical processes, such as interpreters for page description
   languages or command processors that set various operating modes of
   the printer.

   Figure 2 shows a block diagram of the printer and its basic 13 sub-
   units.





































Bergman, et al.             Standards Track                     [Page 8]

RFC 3805                     Printer MIB v2                    June 2004


                    Figure 2 - Printer Block Diagram

                           Physical Connections
                                   |
                                +-----------+
                                |           |
                            +-------------+ |
                            |  Interface  |-+
                            |    MIB-II   |
                            +-------------+
                                   |
                                +-----------+
                                |           |
                            +-------------+ |    +-----------+
                            | Channel     |-+    | Operator  |
                            |             |      |  Console  |
                            +-------------+      +-----------+
                                   |
                                +-----------+        +---------+
                                |           |        |         |
        +-----------+       +-------------+ |    +-----------+ |
        |  General  |       | Interpreter |-+    |  Alerts   |-+
        |  Printer  |       |             |      |           |
        +-----------+       +-------------+      +-----------+
                                   |
                   +-------------------------------+
                   |        System Controller      |
                   |        HOST-RESOURCES-MIB     |
                   +-------------------------------+

   +------+                    +--------+                  +--------+
   |      |                    |        |                  |        |
+-------+ |    +-------+    +---------+ |    +-------+   +--------+ |
| Input |-+  +--------+|    |  Marker |-+  +--------+|   | Output |-+
|       |===>|        |+<==>|         |<==>|        |+==>|        |
+-------+    +--+  +--+     +---------+    +--+  +--+    +--------+
   \            |  ||                         |  ||         \
    \           |  ||                         |  ||          \
     \          |  ||                         |  ||           \
    +--------+  |  |+-------------------------|  ||         +---------+
    |        |  |  +--------------------------+  ||         |         |
+----------+ |  |            Media Path          |+      +----------+ |
|  Media   |-+  +--------------------------------+       | Finisher |-+
|(optional)|                                             |(optional)|
+----------+                                             +----------+






Bergman, et al.             Standards Track                     [Page 9]

RFC 3805                     Printer MIB v2                    June 2004


2.1.  Overview of the Printer Model

   The model has three basic parts: (1) the flow of a print file into an
   interpreter and onto the marker, (2) the flow of media through the
   marker and (3) the auxiliary sub-units that control and facilitate
   the two prior flows.  The flow of the print data comes through a
   physical connection on which some form of transport protocol stack is
   running.  The data provided by the transport protocol (interface)
   appears on a channel, which is the input to an interpreter.  The
   interpreter converts the print data into a form suitable for marking
   on the media.

   The media resides in Input sub-units from which the media is selected
   and then transported via a Media Path first to a Marking sub-unit and
   then onto an Output sub-unit with (optionally) some finishing
   operations being performed.  The auxiliary sub-units facilitate
   control of the printer, inquiry/control of the operator panel,
   reporting of alerts and the adaptation of the printer to various
   natural languages and characters sets.  All the software sub-units
   run on the System Controller that represents the processor, memory
   and storage systems of the Printer.  Each of the sub-units is
   discussed in more detail below.

   All of the sub-units other than the Alerts report only state
   information, either a description or a status.  The Alerts sub-unit
   reports event information.

2.2.  Printer Sub-Units

   A printer is composed of 13 types of sub-units, called groups.  The
   following sections describe the different types of sub-units.

2.2.1.  General Printer

   The general printer sub-unit is responsible for the overall control
   and status of the printer.  There is exactly one general printer sub-
   unit in a printer.  The General Printer Group in the model represents
   the general printer sub-unit.  In addition to the providing the
   status of the whole printer and allowing the printer to be reset,
   this Group provides information on the status of the packaging of the
   printer, in particular, the covers.  The general printer sub-unit is
   usually implemented on the system controller.

2.2.1.1.  International Considerations

   The localization portion of the general printer sub-unit is
   responsible for identifying the natural language, country, and
   character set in which certain character strings are expressed in



Bergman, et al.             Standards Track                    [Page 10]

RFC 3805                     Printer MIB v2                    June 2004


   this MIB.  Character sets are identified in this MIB using the
   IANACharset textual convention imported from the IANA Character Set
   MIB [CHARMIB].

   There may be one or more localizations supported per printer.  The
   available localizations are specified in the Localization table.
   Localization SHOULD only be performed on string objects which are
   named 'xxxDescription' (sub-unit descriptions) or
   'prtConsoleDisplayBufferText' (local console text).

   The agent SHALL return all other character strings in coded character
   sets in which code positions 0-127 (decimal) are US-ASCII [ASCII].
   The agent SHOULD return all other character strings in the UTF-8
   [RFC3629] transform of ISO 10646 [ISO10646], to conform with the IETF
   Policy on Character Sets and Languages [RFC2277].  Control codes
   (code positions 0-31 and 127 decimal) SHALL NOT be used unless
   specifically required in the DESCRIPTION of an object.

   The character set portion of the general printer Localization table
   is responsible for identifying the possible character sets for the
   operator console, and network management requests for display
   objects.  There may be one or more character sets per printer.
   Default coded character sets for interpreter unit and output octets
   are described in the interpreter sub-unit by
   prtInterpreterDefaultCharSetIn and prtInterpreterDefaultCharSetOut.
   These input/output character sets may be overridden by commands in
   the interpreter language itself.

2.2.2.  Inputs

   Input sub-units are mechanisms that feed media to be marked on into
   the printer.  A printer contains one or more input sub-units.  The
   Input Group in the model represents these.  The model does not
   distinguish fixed input bins from removable trays, except to report
   when a removable tray has been removed.

   There are as many input sub-units as there are distinctly selectable
   input "addresses".  For example, if one tray has both a manual and
   auto feeding option, then this is two input sub-units if these two
   sources can be (must be) separately selected.  However, the above
   would be considered one input sub-unit if putting a sheet in the
   manual feed slot overrides feeding from the contents of the tray.  In
   the second case there is no way to separately select or address the
   manual feed slot.







Bergman, et al.             Standards Track                    [Page 11]

RFC 3805                     Printer MIB v2                    June 2004


2.2.3.  Media

   An input sub-unit can hold one or more instances of the media on
   which marking is to be done.  Typically, there is a large set of
   possible media that can be associated with an input.  The Media Group
   is an extension of the Input Group, which represents media in an
   input sub-unit.  The Media Group only describes the current contents
   of each input and not the possible content of the input sub-unit.

2.2.4.  Outputs

   Output sub-units are mechanisms that receive media that has been
   marked on.  The Output Group in the model represents the one or more
   output mechanisms contained by a printer.  The model does not
   distinguish fixed output bins from removable output bins, except to
   report when a removable bin has been removed.

   There are as many output sub-units as there are distinctly selectable
   output "addresses".  Output sub-units can be addressed in two
   different ways: (1) as a set of "mailboxes" which are addressed by a
   specific mailbox selector such as a bin number or a bin name, or (2)
   as a set of "slots" into which multiple copies are collated.
   Sometimes both modes of using the output sub-units can be used on the
   same printer.  All that is important from the viewpoint of the model
   is that the output units can be separately selected.

2.2.5.  Finishers

   A finisher is a sub-unit that performs some operations on the media
   other than marking.  The Finisher Group in the model represents the
   finisher sub-units.  Some examples of finishing processes are
   stapling, punching, binding, inserting, or folding.  Finishing
   processes may have supplies associated with the process.  Stapling,
   binding, and punching are examples of processes that have supplies.
   A printer may have more than one finishing sub-unit and each
   finishing sub-unit may be associated with one or more output sub-
   units. Finishers are described in the companion Finisher MIB
   [RFC3806].

   The model does not specify the exact interaction and sequencing
   between an output device and its associated finisher.  It depends on
   the type of finishing process and the exact implementation of the
   printer system.  This standard allows for the logical association of
   a finishing process with an output device but does not put any
   restrictions on the exact sequence or interaction with the associated
   output device.  The output and finisher sub-units may or may not be
   separate identifiable physical mechanisms depending on the exact




Bergman, et al.             Standards Track                    [Page 12]

RFC 3805                     Printer MIB v2                    June 2004


   implementation of a printer.  In addition, a single output device may
   be associated with multiple finishing sub-units and a single
   finishing sub-unit may be associated with multiple output devices.

2.2.6.  Markers

   A marker is the mechanism that produces marks on the print media.
   The Marker Group in the model represents the marker sub-units and
   their associated supplies.  A printer can contain one or more marking
   mechanisms.  Some examples of multiple marker sub-units are a printer
   with separate markers for normal and magnetic ink or an image setter
   that can output to both a proofing device and final film.  Each
   marking device can have its own set of characteristics associated
   with it, such as marking technology and resolution.

   In this model the marker sub-unit is viewed as very generalized and
   encompasses all aspects of a marking process.  For example, in a
   xerographic process, the marking process as well as the fusing
   process would be included in the generalized concept of the marker.
   With the generalized concept of a marking process, the concept of
   multiple marking supplies associated with a single marking sub-unit
   results.  For example, in the xerographic process, there is not only
   a supply of toner, but there can also be other supplies such as a
   fuser supply (e.g., fuser oil) that can be consumed and replaced
   separately.  In addition there can be multiple supplies of toner for
   a single marker device, as in a color process.

2.2.7.  Media Paths

   The media paths encompass the mechanisms in the printer that move the
   media through the printer and connect all other media related sub-
   units: inputs, outputs, markers and finishers.  A printer contains
   one or more media paths.  The Media Path Group in the model
   represents these.  The Media Path group has some objects that apply
   to all paths plus a table of the separate media paths.

   In general, the design of the media paths determines the maximum
   speed of the printer as well as the maximum media size that the
   printer can handle.  Media paths are complex mechanisms and can
   contain many different identifiable sub-mechanisms such as media
   movement devices, media buffers, duplex units and interlocks.  Not
   all of the various sub-mechanisms reside on every media path.  For
   example, one media path may provide printing only on one surface of
   the media (a simplex path) and another media path may have a sub-
   mechanism that turns the media over and feeds it a second time
   through the marker sub-unit (a duplex path).  The duplex path may





Bergman, et al.             Standards Track                    [Page 13]

RFC 3805                     Printer MIB v2                    June 2004


   even have a buffer sub-mechanism that allows multiple copies of the
   obverse side to be held before the reverse side of all the copies is
   marked.

2.2.8.  System Controller

   The System Controller is the sub-unit upon which the software
   components of the Printer run.  The Host Resources MIB [RFC2790]
   represents the System Controller in the model.  The Host Resources
   MIB allows for the specification of the processor(s), memory, disk
   storage, file system and other underlying sub-mechanisms of the
   printer.  The controller can range from simple single processor
   systems to multiprocessor systems.  In addition, controllers can have
   a full range of resources such as hard disks.  The printer is modeled
   to have one system controller even though it may have more than one
   processor and multiple other resources associated with it.

2.2.9.  Interfaces

   An interface is the communications port and associated protocols that
   are responsible for the transport of data to the printer.  A printer
   has one or more interface sub-units.  The interfaces are represented
   by the Interfaces Group of MIB-II [RFC1213], [RFC2863].  Some
   examples of interfaces are serial ports (with little or no protocol)
   and Ethernet ports on which one might run Internet IP, Novell IPX,
   etc.

2.2.10.  Print Job Delivery Channels

   The print job delivery channel sub-units identify the independent
   sources of print data (here print data is the information that is
   used to construct printed pages and may have both data and control
   aspects).  A printer may have one or more channels.  The channel sub-
   units are represented by the Print Job Delivery Channel Group in the
   Model.  The electronic path typically identifies each channel and
   service protocol used to deliver print data to the printer.  A
   channel sub-unit may be independently enabled (allowing print data to
   flow) or disabled (stopping the flow of print data).  It has a
   current Control Language that can be used to specify which
   interpreter is to be used for the print data and to query and change
   environment variables used by the interpreters (and SNMP).  There is
   also a default interpreter that is to be used if an interpreter is
   not explicitly specified using the Control Language.  Print Job
   Delivery Channel sub-units can, and usually are, based on an
   underlying interface.






Bergman, et al.             Standards Track                    [Page 14]

RFC 3805                     Printer MIB v2                    June 2004


2.2.11.  Interpreters

   The interpreter sub-units are responsible for the conversion of a
   description of intended print instances into images that are to be
   marked on the media.  A printer may have one or more interpreters.
   The Interpreter Group in the Model represents the interpreter sub-
   units. Each interpreter is generally implemented with software
   running on the System Controller sub-unit.  The Interpreter Table has
   one entry per interpreter where the interpreters include both Page
   Description Language (PDL) Interpreters and Control Language
   Interpreters.

2.2.12.  Console

   Many printers have a console on the printer, the operator console
   that is used to display and modify the state of the printer.  The
   console can be as simple as a few indicators and switches or as
   complicated as full screen displays and keyboards.  There can be at
   most one such console.  The Console Group in the model represents
   this console sub-unit.  Although most of the information displayed
   there is also available in the state of the printer as represented by
   the various Groups, it is useful to be able to query and modify the
   operator console remotely.  For example, a management application
   might like to display to its user the current message on the operator
   console of the remote printer or the management application user
   might like to modify the current message on the operators console of
   the remote printer.  As another example, one might have a remote
   application that puts up a pseudo console on a workstation screen.
   Since the rules by which the printer state is mapped onto the console
   and vice versa are not standardized, it is not possible to reproduce
   the console state or the action of console buttons and menus.
   Therefore, the Console Group provides access to the console.  The
   operator console is usually implemented on the system controller with
   additional hardware for input and display.

2.2.13.  Alerts

   The alert sub-unit is responsible for detecting reportable events,
   making an entry in the alert table and, if and only if the event is a
   critical event, initiating a trap.  The exception to this rule is
   when the "alertRemovalofBinaryChangeEntry" trap is generated.  The
   alert sub-unit is represented by the Alerts Group and, in particular,
   the Alert Table.  This table contains information on the severity,
   sub- unit, and detailed location within the sub-unit, alert code and
   description of each alert that is currently active within the
   printer.  Each reportable event causes an entry to be made in the
   Alert Table.




Bergman, et al.             Standards Track                    [Page 15]

RFC 3805                     Printer MIB v2                    June 2004


2.2.13.1.  Status and Alerts

   Summary information about the state of the printer is reported at
   three separate levels: (1) The status of the printer as a whole is
   reported in the Host Resources MIB, (2) The status of various sub-
   units is reported in the principle table of the Group that represents
   the sub-unit, and (3) Alert codes are reported in the Alert Table.

2.2.13.2.  Overall Printer Status

   Of the many states a printer can be in, certain states are more
   "interesting" because of the distinct actions they are likely to
   provoke in the administrator.  These states may be applied to the
   printer as a whole, or to a particular sub-unit of the printer.
   These named states are:

   Non Critical Alert Active - For the printer this means that one or
   more sub-units have a non-critical alert active.  For a sub-unit,
   this means that the sub-unit has a non-critical alert active.

   Critical Alert Active - For the printer this means that one or more
   sub-units have a critical alert active.  For a sub-unit, this means
   that the sub-unit has a critical alert active.

   Unavailable - The printer or sub-unit is unavailable for use (this is
   the same as "broken" or "down" in other terminology).  A trained
   service person is typically necessary to make it available.

   Moving on-line or off-line - The printer is either off-line, in the
   process of moving off-line or moving back on-line.  For example, on
   printers with motorized hoppers, reloading paper involves a
   transition to off-line to open the paper bin, filling the hopper and,
   finally, a transition back to on-line as the paper bin is
   repositioned for printing.

   Standby - The printer or sub-unit is not immediately available but
   can accept new instructions.

   Available - The printer or subunit is functioning normally.

   Idle - The printer or subunit is immediately available.

   Active - The printer or subunit is performing its primary function.

   Busy - The printer or subunit is performing a function (not
   necessarily its primary function) and is not immediately available
   for its primary function.




Bergman, et al.             Standards Track                    [Page 16]

RFC 3805                     Printer MIB v2                    June 2004


   The Host Resources MIB [RFC2790] provides three status objects that
   can be used to describe the status of a printer: (1) hrDeviceStatus
   in the entry in the hrDeviceTable; (2) hrPrinterStatus in the
   hrPrinterTable; and (3) hrPrinterDetectedErrorState in the
   hrPrinterTable.  These objects describe many of the states that a
   printer can be in.  The following table shows how the values of the
   three printer-related objects in the Host Resources MIB relate to the
   states named above:

   Printer       hrDeviceStatus hrPrinterStatus hrPrinterDetected-
   Status                                       ErrorState

   Idle           running(2)     idle(3)        none set

   Busy/          running(2)     printing(4)
   Active

   Non Critical   warning(3)     idle(3) or     could be: lowPaper,
   Alert Active                  printing(4)    lowToner, or
                                                serviceRequested

   Critical       down(5)        other(1)       could be: jammed,
   Alert Active                                 noPaper, noToner,
                                                coverOpen, or
                                                serviceRequested

   Unavailable    down(5)        other(1)

   Moving off-    warning(3)     idle(3) or     offline
   line                          printing(4)
   Off-line       down(5)        other(1)       offline

   Moving         down(5)        warmup(5)
   on-line

   Standby        running(2)     other(1)

   These named states are only a subset of the possible states - they
   are not an exhaustive list of the possible states.  Nevertheless,
   several things should be noted.  When using these states, it is not
   possible to detect when both critical and non-critical alerts are
   pending - if both are pending, the Critical Alert Active state will
   prevail.  In addition, a printer in the Standby state will be
   represented in the Host Resources MIB with a device status of
   running(2) and a printer status of other(1), a set of states that
   don't uniquely distinguish this important printer state.





Bergman, et al.             Standards Track                    [Page 17]

RFC 3805                     Printer MIB v2                    June 2004


   Detailed status per sub-unit is reported in the sub-unit status
   fields.

2.2.13.2.1.  Host Resources MIB Printer Status

   For completeness, the definitions of the Printer Status objects of
   the Host Resources MIB [RFC2790] are given below:

   hrDeviceStatus OBJECT-TYPE
       SYNTAX  INTEGER {
                  unknown(1),
                  running(2),
                  warning(3),
                  testing(4),
                  down(5)
             }
       ACCESS  read-only
       STATUS  mandatory
       DESCRIPTION
        "The current operational state of the device
        described by this row of the table.  A value
        unknown(1) indicates that the current state of the
        device is unknown.  running(2) indicates that the
        device is up and running and that no unusual error
        conditions are known.  The warning(3) state
        indicates that agent has been informed of an
        unusual error condition by the operational software
        (e.g., a disk device driver) but that the device
        is still 'operational'.  An example would be high
        number of soft errors on a disk.  A value of
        testing(4), indicates that the device is not
        available for use because it is in the testing
        state.  The state of down(5) is used only when
        the agent has been informed that the device is
        not available for any use."
       ::= { hrDeviceEntry 5 }

   hrPrinterStatus OBJECT-TYPE
       SYNTAX INTEGER {
                 other(1),
                 unknown(2),
                 idle(3),
                 printing(4),
                 warmup(5)
             }
       ACCESS  read-only
       STATUS  mandatory
       DESCRIPTION



Bergman, et al.             Standards Track                    [Page 18]

RFC 3805                     Printer MIB v2                    June 2004


        "The current status of this printer device.  When in the
        idle(3), printing(4), or warmup(5) state, the corresponding
        hrDeviceStatus should be running(2) or warning(3).  When in
        the unknown(2) state, the corresponding hrDeviceStatus
        should be unknown(1)."
       ::= { hrPrinterEntry 1 }

   hrPrinterDetectedErrorState OBJECT-TYPE
       SYNTAX OCTET STRING (0..128)
       ACCESS read-only
       STATUS mandatory
       DESCRIPTION
        "This object represents any error conditions detected by the
        printer.  The error conditions are encoded as an OCTET STRING
        with the following definitions:

        Condition          Bit #

        lowPaper             0
        noPaper              1
        lowToner             2
        noToner              3
        doorOpen             4
        jammed               5
        offline              6
        serviceRequested     7

        inputTrayMissing     8
        outputTrayMissing    9
        markerSupplyMissing 10
        outputNearFull      11
        outputFull          12
        inputTrayEmpty      13
        overduePreventMaint 14

        Bit # 15 is not assigned.

        If multiple conditions are currently detected and the
        hrDeviceStatus would not otherwise be unknown(1) or
        testing(4), the hrDeviceStatus shall correspond to the worst
        state of those indicated, where down(5) is worse than
        warning(3), which is worse than running(2).

        Bits are numbered starting with the most significant bit of
        the first byte being bit 0, the least significant bit of the
        first byte being bit 7, the most significant bit of the
        second byte being bit 8, and so on.  A one bit encodes that
        the condition was detected, while a zero bit encodes that



Bergman, et al.             Standards Track                    [Page 19]

RFC 3805                     Printer MIB v2                    June 2004


        the condition was not detected.

        This object is useful for alerting an operator to specific
        warning or error conditions that may occur, especially those
        requiring human intervention."
         ::= { hrPrinterEntry 2 }

2.2.13.2.2.  Sub-unit Status

   Sub-unit status is reported in the entries of the principle table in
   the Group that represents the sub-unit.  For sub-units that report a
   status, there is a status column in the table and the value of this
   column is always an integer formed in the following way.

   The PrtSubUnitStatusTC is an integer that is the sum of 5 distinct
   values, Availability, Non-Critical, Critical, On-line, and
   Transitioning.  These values are:

   Availability                           value

           Available and Idle               0       000'b
           Available and Standby            2       010'b
           Available and Active             4       100'b
           Available and Busy               6       110'b
           Unavailable and OnRequest        1       001'b
           Unavailable because Broken       3       011'b
           Unknown                          5       101'b

   Non-Critical

           No Non-Critical Alerts           0
           Non-Critical Alerts              8

   Critical

           No Critical Alerts               0
           Critical Alerts                 16

   On-Line

           State is On-Line                 0
           State is Off-Line               32

   Transitioning

           At intended state                0
           Transitioning to intended state 64




Bergman, et al.             Standards Track                    [Page 20]

RFC 3805                     Printer MIB v2                    June 2004


   For example, an input (tray) that jammed on the next to the last page
   may show a status of 27 (unavailable because broken (3) + a critical
   state (16), jammed, and a noncritical state (8), low paper).

2.2.13.3.  Alert Tables

   The Alert Group consists of a single table in which all active alerts
   are represented.  This section provides an overview of the table and
   a description of how it is managed.  The basic content of the alert
   table is the severity (critical or non-critical) of the alert, the
   Group and entry where a state change caused the alert, additional
   information about the alert (a more detailed location, an alert code,
   and a description), and an indication of the level of training needed
   to service the alert.

   The Alert Table contains some information that is redundant, for
   example that an event has occurred, and some information that is only
   represented in the Alert Table, for example the additional
   information.  A single table was used because a single entry in a
   group could cause more than one alert, for example paper jams in more
   than one place in a media path.  Associating the additional
   information with the entry in the affected group would only allow one
   report where associating the additional information with the alert
   makes multiple reports possible.  Every time an alert occurs in the
   printer, the printer makes one or more entries into the Alert Table.
   The printer determines if an event is to be classified as critical or
   non-critical.  If the severity of the Alert is "critical", the
   printer sends a trap or event notification to the host indicating
   that the table has changed.  Whether or not a trap is sent, the
   management application is expected to poll the printer on a regular
   basis and to read and parse the table to determine what conditions
   have changed, in order to provide reliable information to the
   management application user.

2.2.13.4.  Alert Table Management

   The alert tables are sparsely populated tables.  This means the
   tables will only contain entries of the alerts that are currently
   active and the number of rows, or entries in the table will be
   dynamic.  More than one event can be added or removed from the event
   tables at a time depending on the implementation of the printer.

   There are basically two kinds of events that produce alerts: binary
   change events and unary change events.  Binary change events come in
   pairs: the leading edge event and the trailing edge event.  The
   leading edge event enters a state from which there is only one exit;
   for example, going from running to stopped with a paper jam.  The
   only exit from this state is fixing the paper jam and it is clear



Bergman, et al.             Standards Track                    [Page 21]

RFC 3805                     Printer MIB v2                    June 2004


   when that is accomplished.  The trailing edge event exits the state
   that was entered by the leading edge event.  In the example above,
   fixing the paper jam is the trailing edge event.

   It is relatively straightforward to manage binary change events in
   the Alert Table.  Only the leading edge event makes an entry in the
   alert table.  This entry persists in the Alert Table until the
   trailing edge event occurs at which point this event is signaled by
   the removal of the leading edge event entry in the Alert Table.  That
   is, a trailing edge event does not create an entry; it removes the
   corresponding leading edge event.  Removing the leading edge entry
   may cause the unary change event "alertRemovalofBinaryChangeEntry" to
   be added to the table.  With binary change events it is possible to
   compute the maximum number that can occur at the same time and
   construct an Alert Table that would hold that many events.  There
   would be no possibility of table overflow and no information about
   outstanding events would be lost.

   Unfortunately, there are some events that are not binary changes.
   This other category of event, the unary change event, is illustrated
   by the configuration change event.  With this kind of event the state
   of the machine has changed, but to a state which is (often) just as
   valid as the state that was left and from which no return is
   necessary.  For example, an operator may change the paper that is in
   the primary input source from letter to legal.  At some time in the
   future the paper may be changed back to letter, but it might be
   changed to executive instead.  This is where the problem occurs.  It
   is not obvious how long to keep unary change event entries in the
   Alert Table.  If they were never removed, the Alert Table would
   continue to grow indefinitely.

   The agent needs to have an algorithm implemented for the management
   of the alert table, especially in the face of combinations of binary
   and unary alerts that would overflow the storage capacity of the
   table.  When the table is full and new alerts need to be added, an
   old alert to be deleted should be chosen using the following rules:

   1. Find a non-critical unary alert and delete it.  If there are
      multiple non-critical unary alerts, it is suggested that the
      oldest one is chosen.  If there are no non-critical unary alerts,
      then,

   2. Find a non-critical binary alert and delete it.  If there are
      multiple non-critical binary alerts, it is suggested that the
      oldest one is chosen.  If there are no non-critical binary alerts,
      then,





Bergman, et al.             Standards Track                    [Page 22]

RFC 3805                     Printer MIB v2                    June 2004


   3. Find a critical (binary) alert and delete it.  If there are
      multiple critical alerts, it is suggested that the oldest one be
      chosen.  Agent implementers are encouraged to provide at least
      enough storage space for the maximum number of critical alerts
      that could occur simultaneously.  Note that all critical alerts
      are binary.

   In the event that a critical binary alert has been deleted out of the
   alert table; when space allows and the alert condition still exists,
   the alert should be re-added to the alert table even if there was no
   subsequent transition into the associated state.  It is recommended
   that this be done for non-critical binary alerts as well.  Note that
   the new alert entry will not have the same index as the original
   entry that was moved out of the table.

   Note that because the Alert Index is a monotonically increasing
   integer there will be gaps in the values in the table when an alert
   is deleted.  The management application may want to re-acquire the
   Printer state and check for state changes that it did not observe in
   the Alert Table if such gaps are detected.

2.3.  Read-Write Objects

   Some objects in the printer MIB reflect the existence or amount of a
   given resource within the printer.  Some examples of such resources
   are the size and number of sheets in a paper tray or the existence of
   certain output options.  Some printers have automatic sensors for
   these resources.  Most printers lack sensors for every property of
   every resource.  The management application is allowed to write into
   objects that hold descriptive or existence values for printers that
   cannot sense these values.  The ability to change the value of a
   read- write object may depend on the implementation of the agent.
   Many objects in the MIB are given read-write access, but a printer
   implementation might only permit a management application to change
   the value if the printer can not sense the value itself.  Note that
   even though some objects explicitly state the behavior of conditional
   ability to change values, any read-write object may act this way.

   Generally, an object is given read-write access in the Printer MIB
   specification if:

   1. The object involves installation of a resource that some printers
      cannot themselves detect.  Therefore, external means are needed to
      inform the printer of the installation.  (Here external means
      include using the operator console, or remote management
      application) and





Bergman, et al.             Standards Track                    [Page 23]

RFC 3805                     Printer MIB v2                    June 2004


   2. The printer will behave differently if the installation of the
      resource is reported than the printer would if the installation
      were not reported; that is, the object is not to be used as a
      place to put information not used by the printer, i.e., not a
      "sticky-note". Another way of saying this is that the printer
      believes that information given it and acts as if the information
      were true.  For example, on a printer that cannot sense the size,
      if one paper size is loaded, but another size is set into the
      paper size object, then the printer will use the size that was set
      as its current paper size in its imaging and paper handling.

   3. The printer may get hints that it may not know about the existence
      or properties of certain resources.  For example, a paper tray may
      be removed and re-inserted.  When this removal and insertion
      happens, the printer may either assume that a property, such as
      the size of paper in the tray, has not changed or the printer may
      change the value of the associated object to "unknown", as might
      be done for the amount of paper in the tray.  As long as the
      printer acts according to the value in  the object either strategy
      is acceptable.

   4. It is an implementation-specific matter as to whether or not MIB
      object values are persistent across power cycles or cold starts.
      It is particularly important that the values of the
      prtMarkerLifeCount object persist throughout the lifetime of the
      printer.  Therefore, if the value of any MIB object persists
      across power cycles, then the prtMarkerLifeCount object must also
      persist.

2.4.  Enumerations

   Enumerations (enums) are sets of symbolic values defined for use with
   one or more objects.  Commonly used enumeration sets are assigned a
   symbolic data type name (textual convention), rather than being
   specified in the SYNTAX clause of each individual object definition.

   Textual conventions defined in the Printer MIB or the companion IANA
   Printer MIB are extensible by RFC publication or by Designated Expert
   Review (see the 'IANA Considerations' section of this Printer MIB and
   the DESCRIPTION clause in MODULE-IDENTITY of IANA Printer MIB).  All
   of these textual conventions are:

   a) used more than once in the Printer MIB itself; or

   b) imported and used in the companion Finisher MIB; or

   c) imported and used in any other, including vendor private, MIB
      modules.



Bergman, et al.             Standards Track                    [Page 24]

RFC 3805                     Printer MIB v2                    June 2004


   The Printer MIB has also defined the following special values for use
   with objects of the syntax "Integer32" to define conditions that are
   outside of the normal numeric range:  other(-1), unknown(-2), and
   partial(-3).  The 'partial' value means that there is some supply
   remaining (but the amount is indeterminate) or there is some capacity
   remaining (but the amount is indeterminate).  The Integer32 range
   field indicates in which objects these special values are valid.

2.4.1.  Registering Additional Enumerated Values

   The Printer MIB and the companion IANA Printer MIB each defines one
   category of textual convention, according to the process employed to
   control the addition of new enumerations:

   Type 1 - All of the legal values are defined in the Printer MIB.
   Additional enumerated values require the publication of a new Printer
   MIB.

   Type 2 - All of the legal values are registered in the IANA Printer
   MIB.  Additional enumerated values require a Designated Expert Review
   defined in "Guidelines for Writing an IANA Considerations Section in
   RFCs" [RFC2434].  The Designated Expert will be selected by the IETF
   Area Director(s) of the Applications Area.

3.  Groups from other MIB Specifications

   This section identifies the groups from other MIBs that shall be
   supported to supplement and complete a printer MIB implementation.
   The section also describes some of the less obvious characteristics
   of the Printer MIB structure that are related to the inclusion of
   these other MIB groups.

3.1.  System Group

   All objects in the system group of MIB-II [RFC1213] shall be
   implemented; however, as described in paragraph 2.4, implementers
   should carefully consider what constitutes the "system".

3.2.  System Controller

   The storage and device groups of the Host Resources MIB [RFC2790]
   shall be implemented to support the printer(s) system controller, and
   any supporting devices.  If deemed appropriate by the implementer,
   other groups of the Host Resources MIB (System, Running Software,
   Running Software Performance, and Installed Software) may be
   implemented.  Because of the structure of the Host Resources MIB, the
   devices constituting the system controller are at the same level as
   the printer.



Bergman, et al.             Standards Track                    [Page 25]

RFC 3805                     Printer MIB v2                    June 2004


3.3.  Interface Group objects

   All objects in the Interfaces Group of MIB-II [RFC1213] shall be
   implemented for all print information interfaces to the printer,
   including non-network interfaces.

3.3.1.  Interface Types

   The interfaces group of RFC 1213 [RFC1213] contains only a partial
   list of interface types that can be specified in the "ifType" object.
   For a complete list of interface types, refer to the IANA registry at
   "ftp://ftp.isi.edu/mib/iana.mib/ianaiftype.mib"

4.  Differences from RFC 1759

   This document supersedes and replaces RFC 1759.  However, a compliant
   implementation of RFC 1759 is also compliant with this document.  The
   following changes to RFC 1759 are included:  (See the printmib
   REVISION/DESCRIPTION clause for additional details of changes.)

   -  Minor editorial corrections and changes.  Updated the cover page
      and added the "SNMP Management Framework" boilerplate to section
      1.

   -  Updated figure 2 to use MIB names instead of RFC numbers.

   -  Updated Coded Character Set description and IANA registration
      process.

   -  Change hrPrinterDetectedErrorState "coverOpen" (bit 4) to
      "doorOpen" per RFC 2790.

   -  Added second octet of hrPrinterDetectedErrorState as partially
      described and assigned in the updated Host Resources MIB (RFC
      2790).

   -  Remove fixed association of hrDeviceStatus (warning/down) from
      hrPrinterDetetctedErrorState per RFC 2790.

   -  Instead of showing bit 15 as "not assigned" in the quote from RFC
      2790 in the hrPrinterDetectedErrorState object, removed that from
      the tabular form and added it as a sentence, because the RFC
      doesn't show bit 15 in the tabular form.

   -  Clarified the international considerations.






Bergman, et al.             Standards Track                    [Page 26]

RFC 3805                     Printer MIB v2                    June 2004


   -  Added prtChannelInformation to the Channel Group textual-
      conventions on a per channel basis to clarify the channel
      description and enhance interoperability.

   -  Deprecated some obsolete channel types.

   -  Extended the Alert Table and PrtMarkerSuppliesSupplyUnit textual
      conventions to include values from the Finisher MIB.

   -  Clarified alerts based on unary vs. binary change events.

   -  Added (optional) unary change event
      alertRemovalOfBinaryChangeEntry(1801).

   -  Establish a convention for contact information for
      prtGeneralCurrentOperator and prtGeneralServicePerson.

   -  Added prtAuxiliarySheetStartupPage     PresentOnOff

   -  Added prtAuxiliarySheetBannerPage      PresentOnOff

   -  Added prtGeneralPrinterName            OCTET STRING

   -  Added prtGeneralSerialNumber           OCTET STRING

   -  Added prtInputNextIndex                Integer32

   -  Added the Input Switching Group

   -  Added prtAlertCriticalEvents           Counter32

   -  Added prtAlertAllEvents                Counter32

   -  Updated PrtAlertCode enums including generic alert codes.

   -  Created five OBJECT-GROUPs (prtAuxilliarySheetGroup,
      prtInputSwitchingGroup, prtGeneralV2Group, prtAlertTableV2Group,
      prtChannelV2Group).  Added the nine new objects to them
      (prtAuxiliarySheetStartupPage, prtAuxiliarySheetBannerPage,
      prtGeneralPrinterName, prtGeneralSerialNumber,
      prtAlertCriticalEvents, prtAlertAllEvents,
      prtInputMediaLoadTimeout, prtInputNextIndex,
      prtChannelInformation).  Created one new NOTIFICATION-GROUP
      (prtAlertTrapGroup) to contain printerV2Alert.  Included the new
      OBJECT-GROUPs and the NOTIFICATION_GROUP in prtMIBCompliance, all
      in GROUP (not MANDATORY-GROUP) clauses.  The nine new objects are
      optional, i.e., this document is backward compatible with RFC
      1759.



Bergman, et al.             Standards Track                    [Page 27]

RFC 3805                     Printer MIB v2                    June 2004


   -  prtAlertTime is strongly recommended.

   -  Deprecated the use of alert codes doorOpen(501) and
      doorClosed(502), in favor of coverOpened(3) and coverClosed(4).

   -  Added the PrtConsoleDisableTC and PrtMarkerAddressabilityUnitTC
      textual conventions, and changed the PrtConsoleDisable and
      PrtMarkerAddressabilityUnit objects' syntax to use those TCs, and
      changed the PrtGeneralEntry and PrtMarkerColorantEntry SEQUENCEs
      to reflect the new syntax.

   -  Added textual conventions "PrtLocalizedDescriptionStringTC" and
      "PrtConsoleDescriptionStringTC" and updated several objects to use
      them.

   -  Changed most enumerations to textual conventions and therefore
      changed the SYNTAX of many objects from RFC 1759 to specify the
      appropriate textual conventions.  (28 TCs were added.)

   -  Changed the TC names "MediaUnit" to "PrtMediaUnitTC",
      "CapacityUnit" to "PrtCapacityUnitTC", and "SubUnitStatus" to
      "PrtSubUnitStatusTC"

   -  All objects with a MAX-ACCESS of read-write now have a MIN-ACCESS
      of read-only.

   -  Added 'IANA Considerations' and 'Internationalization
      Considerations' as top level sections, per IETF guidelines.

   -  Updated Security and Copyright sections.

   -  Updated references and split into Normative and Informative
      groups.

   -  Added Appendix E - Overall Printer Status Table.

   -  Updated participant and contact information.

   -  Removed CodedCharSet Textual Convention, replaced with an import
      of the IANACharset.

   -  Removed all comment statements that indicated objects or groups
      are mandatory or optional.  Avoids any potential conflicts with
      the conformance section.







Bergman, et al.             Standards Track                    [Page 28]

RFC 3805                     Printer MIB v2                    June 2004


   -  Added text to empty description clauses.  (prtStorageRefTable,
      prtDeviceRefTable, prtMarkerTable, prtMediaPathTable,
      prtChannelTable, prtInterpreterTable, prtConsoleLightTable, and
      prtAlertTable)

   -  Added "DEFVAL { unknown }" to prtInterpreterDefaultCharSetIn and
      prtInterpreterDefaultCharSetOut.

   -  Changed "...values are expected to remain stable..." to "...values
      SHOULD remain stable..." in the description clauses for the index
      object in all tables.

   -  Added ranges to all objects with a syntax of Integer32.

   -  Revised the description clause for prtAlertGroupIndex.

   -  Added additional text to the description clause for
      prtMediaPathEntry, prtChannelEntry, prtInterpreterEntry, and
      printerV2Alert.

   -  Added text to section 2.4 to explain the usage of textual
      conventions in this MIB and others.  Also added a note defining
      the common usage of the enumerations 'other(-1)' and 'unknown(-2)'

   -  Changed range of prtStorageRefSeqNumber, prtDeviceRefSeqNumber,
      and prtConsoleLightIndex from (0..65535) to (1..65535) since index
      values cannot be zero.  (Typo in RFC 1759)

   -  The PWG Standard for Standardized Media Names is now recommended
      for the objects prtInputMediaName, prtInputMediaColor, and
      prtInputMediaType.

   -  Added chSMTP(45) to prtChannelTypeTC.

5.  The IANA Printer MIB

IANA-PRINTER-MIB DEFINITIONS ::= BEGIN
 -- http://www.iana.org/assignments/ianaprinter-mib

IMPORTS
    MODULE-IDENTITY,
        mib-2
            FROM SNMPv2-SMI                              -- [RFC2578]
    TEXTUAL-CONVENTION
            FROM SNMPv2-TC;                              -- [RFC2579]

ianaPrinterMIB MODULE-IDENTITY
    LAST-UPDATED  "200406020000Z" -- June 2, 2004



Bergman, et al.             Standards Track                    [Page 29]

RFC 3805                     Printer MIB v2                    June 2004


    ORGANIZATION  "IANA"
    CONTACT-INFO  "Internet Assigned Numbers Authority
                  Postal: ICANN
                          4676 Admiralty Way, Suite 330
                          Marina del Rey, CA 90292

                  Tel:    +1 310 823 9358
                  E-Mail: iana@iana.org"

    DESCRIPTION   "This MIB module defines a set of printing-related
                  TEXTUAL-CONVENTIONs for use in Printer MIB (RFC 3805),
                  Finisher MIB (RFC 3806), and other MIBs which need to
                  specify printing mechanism details.

                  Any additions or changes to the contents of this MIB
                  module require either publication of an RFC, or
                  Designated Expert Review as defined in RFC 2434,
                  Guidelines for Writing an IANA Considerations Section
                  in RFCs.  The Designated Expert will be selected by
                  the IESG Area Director(s) of the Applications Area.

                  Copyright (C) The Internet Society (2004). The
                  initial version of this MIB module was published
                  in RFC 3805.  For full legal notices see the RFC
                  itself or see:
                  http://www.ietf.org/copyrights/ianamib.html"

    REVISION      "200406020000Z"  -- June 2, 2004
    DESCRIPTION   "Original version, published in coordination
                  with Printer MIB (RFC 3805)."
    ::= { mib-2 109 }

--
-- Generic TEXTUAL-CONVENTIONs
--

PrtCoverStatusTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtCoverStatus in RFC 1759.
    STATUS    current
    DESCRIPTION
        "Values for encoding the state of a particular cover or
        access panel on the printer case or enclosure."
    SYNTAX    INTEGER {
                  other(1),
                  coverOpen(3),
                  coverClosed(4),
                  interlockOpen(5),
                  interlockClosed(6)



Bergman, et al.             Standards Track                    [Page 30]

RFC 3805                     Printer MIB v2                    June 2004


                  }

--
-- General Group TEXTUAL-CONVENTIONs
--

PrtGeneralResetTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtGeneralReset in RFC 1759.
    STATUS    current
    DESCRIPTION
        "Values for reading and writing the prtGeneralReset object.

        If a device does not have NVRAM, the device shall none the
        less respond to a SET with the value resetToNVRAM(5) with a
        sort of warm reset that resets the device to implementation-
        defined state that is preferably under control of the system
        administrator by some means outside the scope of the Printer
        MIB specification."

    SYNTAX    INTEGER {
                  notResetting(3),
                  powerCycleReset(4), -- Cold Start
                  resetToNVRAM(5), -- Warm Start
                  resetToFactoryDefaults(6) -- Reset contents of
                                            -- NVRAM to factory
                                            -- defaults
                  }
--
-- Channel Group TEXTUAL-CONVENTIONs
--

PrtChannelTypeTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtChannelType in RFC 1759.
    STATUS    current
    DESCRIPTION
        "This enumeration indicates the type of channel that is
        receiving jobs."
    SYNTAX    INTEGER {
                  other(1),
                  chSerialPort(3),
                  chParallelPort(4),
                  chIEEE1284Port(5),
                  chSCSIPort(6),
                  chAppleTalkPAP(7),
                      -- AppleTalk Printer
                      -- Access Protocol (PAP)
                      --
                      -- prtChannelInformation entry:



Bergman, et al.             Standards Track                    [Page 31]

RFC 3805                     Printer MIB v2                    June 2004


                      --
                      -- Printer Name
                      --   Keyword:      Name
                      --   Syntax:       Name
                      --   Status:       Optional
                      --   Multiplicity: Single
                      --   Description:  The name of the printer
                      --     within the AppleTalk naming scope
                  chLPDServer(8),
                      -- prtChannelInformation entry:
                      --
                      -- Printer queue name
                      --   Keyword:      Queue
                      --   Syntax:       Name
                      --   Status:       Mandatory
                      --   Multiplicity: Single
                      --   Description: queue name as
                      --     defined in [RFC1179].
                  chNetwareRPrinter(9),
                      -- Novell, Inc.
                      -- For each entry of this type, the
                      -- prtChannelInformation must have a pair of
                      -- keywords.  For Netware 3.x channels this must
                      -- be a (PServer, Printer) pair.  For Netware
                      -- 4.x channels and for IntranetWare channels
                      -- this must be a (NDSTree, NDSPrinter) pair.
                      --
                      -- prtChannelInformation entries:

                      -- Print Server Name
                      --   Keyword:      PServer
                      --   Syntax:       Name
                      --   Status:       Mandatory
                      --   Multiplicity: Single
                      --   Description:  The Pserver's SAP name
                      --
                      -- Printer Number
                      --   Keyword:      Printer
                      --   Syntax:       Integer
                      --   Status:       Mandatory
                      --   Multiplicity: Single
                      --   Description:  The printer number
                      --
                      -- NDSTree
                      --   Keyword:      NDSTree
                      --   Syntax:       Name
                      --   Multiplicity: Single
                      --   Description:  The tree's SAP name



Bergman, et al.             Standards Track                    [Page 32]

RFC 3805                     Printer MIB v2                    June 2004


                      --
                      -- NDS Printer object
                      --   Keyword:      NDSPrinter
                      --   Syntax:       Text (Unicode)
                      --   Status:       Mandatory
                      --   Multiplicity: Single
                      --   Description:  The fully qualified
                      --                 name of the Printer
                      --
                      -- In the Netware 3.x environment, the
                      -- client checks the Bindery object
                      -- representing the named PServer.  The
                      -- client then checks for queues which
                      -- are associated with the numbered
                      -- printer.  In the 4.x and IntraNetware
                      -- environment, the client looks up the
                      -- queues which are associated with the
                      -- NDS Printer Object in the named Tree.
                      -- Depending on client access rights to
                      -- those queues, the client submits jobs
                      -- to the appropriate queue.
                  chNetwarePServer(10),
                      -- Novell,Inc.
                      -- For each entry of this type, the
                      -- prtChannelInformation must have a pair
                      -- of keywords.  For Netware 3.x channels
                      -- this must be a (Server, PServer) pair.
                      -- For Netware 4.x and IntranetWare
                      -- channels, this must be a
                      -- (NDSTree, NDSPServer) pair.
                      --
                      -- prtChannelInformation entries:
                      --
                      -- Server Name
                      --   Keyword:      Server
                      --   Syntax:       Name
                      --   Status:       Mandatory
                      --   Multiplicity: Single
                      --   Description:  The SAP name of the
                      --   server for which the PServer is defined.
                      --
                      -- PServer
                      --   Keyword:      PServer
                      --   Syntax:       Name
                      --   Status:       Mandatory
                      --   Multiplicity: Single
                      --   Description:  The bindery name of
                      --                 the PServer



Bergman, et al.             Standards Track                    [Page 33]

RFC 3805                     Printer MIB v2                    June 2004


                      --
                      -- NDS Tree
                      --   Keyword:      NDSTree
                      --   Syntax:       Name
                      --   Status:       Mandatory
                      --   Multiplicity: Single
                      --   Description:  The NDS Tree name
                      --
                      -- PServer
                      --   Keyword:      NDSPServer
                      --   Syntax:       Text (Unicode)
                      --   Status:       Mandatory
                      --   Multiplicity: Single
                      --   Description:  The fully qualified
                      --     name of the PServer object in the tree.
                      --
                      -- In the 3.x environment, the client
                      -- checks the bindery object
                      -- representing the named PServer on the
                      -- named Server.  In the 4.x and
                      -- IntranetWare environment,
                      -- the client checks the NDS object
                      -- representing the named PServer in the
                      -- named Tree.  In either case, the
                      -- client then checks for all queues
                      -- associated with the Pserver object.
                      -- Depending on client access rights
                      -- to those queues, the client submits
                      -- jobs to the appropriate queue.
                  chPort9100(11),
                      -- DEPRECATED
                      -- (see chPortTCP - 37; chBidirPortTCP - 38)
                  chAppSocket(12),
                      -- A bi-directional, LPD-like, protocol using
                      -- 9101 for control and 9100 for data.
                      -- Adobe Systems, Inc.
                  chFTP(13),         -- [RFC959]
                  chTFTP(14),        -- [RFC1350]
                  chDLCLLCPort(15),
                  chIBM3270(16),     -- IBM Coax
                  chIBM5250(17),     -- IBM Twinax
                  chFax(18),
                  chIEEE1394(19),
                  chTransport1(20),
                      -- TCP port 35, for reserved TCP port list see
                      -- [RFC3232].  This RFC should also be
                      -- referenced for other channel
                      -- enumerations utilizing TCP port



Bergman, et al.             Standards Track                    [Page 34]

RFC 3805                     Printer MIB v2                    June 2004


                      -- numbers 0 through 1024.
                  chCPAP(21),      -- TCP port 170
                      -- Digital Equipment Corp.
                  chDCERemoteProcCall(22), -- OSF
                      -- DEPRECATED
                  chONCRemoteProcCall(23), -- SUN Microsystems
                      -- DEPRECATED
                  chOLE(24),         -- Microsoft
                      -- DEPRECATED
                  chNamedPipe(25),
                  chPCPrint(26),   -- Banyan
                  chServerMessageBlock(27),
                      -- File/Print sharing protocol used by
                      -- various network operating systems
                      -- from IBM 3Com, Microsoft and others
                      --
                      -- prtChannelInformation entry:
                      --
                      -- Service Name
                      --   Keyword:      Name
                      --   Syntax:       Name
                      --   Status:       Optional
                      --   Multiplicity: Single
                      --   Description:  The service name of
                      --                 the printer
                  chDPMF(28),   -- IBM Infoprint
                  chDLLAPI(29), -- Microsoft
                      -- DEPRECATED
                  chVxDAPI(30), -- Microsoft
                      -- DEPRECATED
                  chSystemObjectManager(31), -- IBM
                  chDECLAT(32),
                      -- Digital Equipment Corp.
                      --
                      -- prtChannelInformation entries:
                      --
                      -- Port Name
                      --   Keyword:      Port
                      --   Syntax:       Name
                      --   Status:       Conditionally
                      --                 Mandatory
                      --                 (see note below)
                      --   Multiplicity: Single
                      --   Description:  LAT port name
                      --
                      -- Service Name
                      --   Keyword:      Service
                      --   Syntax:       Name



Bergman, et al.             Standards Track                    [Page 35]

RFC 3805                     Printer MIB v2                    June 2004


                      --   Status:       Conditionally
                      --                 Mandatory
                      --   Multiplicity: Single
                      --   Description:  LAT service name
                      --
                      -- The LAT channel may be
                      -- identified by either a port or
                      -- service, so either a
                      -- Port or Service entry must be
                      -- specified, but not both.
                  chNPAP(33),
                  chUSB(34), -- Not in RFC 1759
                             -- Universal Serial Bus
                  chIRDA(35), -- Not in RFC 1759
                              -- Infrared Data Assoc. Prot.
                  chPrintXChange(36),  -- Not in RFC 1759
                                       -- PrintXChange Protocol
                  chPortTCP(37),  -- Not in RFC 1759
                      -- A unidirectional "raw" TCP
                      -- channel that uses an administratively
                      -- assigned TCP port address.
                      --
                      -- prtChannelInformation entry:
                      --
                      -- Port Number
                      --   Keyword:      Port
                      --   Syntax:       decimal number
                      --   Status:       Mandatory
                      --   Multiplicity: Single
                      --   Description:  TCP port number
                  chBidirPortTCP(38),  -- Not in RFC 1759
                      -- A bi-directional version of chPortTCP
                      --
                      -- prtChannelInformation entries:
                      -- (See chPortTCP)
                  chUNPP(39),  -- Not in RFC 1759
                      -- Universal Network Printing
                      -- Protocol(UNPP). A bi-directional,
                      -- multiport network printing
                      -- application protocol available on
                      -- multiple transport protocols.
                      -- Underscore, Inc.
                      -- Contact: info@underscore.com
                  chAppleTalkADSP(40),  -- Not in RFC 1759
                      -- AppleTalk Data Stream Protocol.
                      -- ADSP is part of the AppleTalk
                      -- suite of protocols.
                      -- It is a symmetric, connection-



Bergman, et al.             Standards Track                    [Page 36]

RFC 3805                     Printer MIB v2                    June 2004


                      -- oriented protocol that makes
                      -- possible the establishment
                      -- and maintenance of full-duplex
                      -- streams of data bytes between
                      -- two sockets in an AppleTalk
                      -- internet.
                      -- See [APPLEMAC].
                  chPortSPX(41),  -- Not in RFC 1759
                      -- Sequenced Packet Exchange (SPX)
                      -- socket.
                      -- Novell, Inc. Similar to TCP, a
                      -- bi-directional data pipe using
                      -- Novell SPX as a transport.
                      --
                      -- prtChannelInformation entries:
                      --
                      -- Network Number
                      --   Keyword:      Net
                      --   Syntax:       HexString
                      --   Status:       Mandatory
                      --   Multiplicity: Single
                      --   Description:  The network number
                      --
                      -- Node Number
                      --   Keyword:      Node
                      --   Syntax:       HexString
                      --   Status:       Mandatory
                      --   Multiplicity: Single
                      --   Description:  The node number
                      --
                      -- Socket Number
                      --   Keyword:      Socket
                      --   Syntax:       HexString
                      --   Status:       Mandatory
                      --   Multiplicity: Single
                      --   Description:  The SPX socket number
                      --
                      -- There must be exactly one "Net" and
                      -- one "Node" and one "Socket" entry.  A
                      -- HexString is a binary value
                      -- represented as a string of
                      -- ASCII characters using hexadecimal
                      -- notation.
                  chPortHTTP(42),  -- Not in RFC 1759
                      -- Hypertext Transfer Protocol. See [RFC1945]
                      -- and [RFC2616].
                  chNDPS(43),  -- Not in RFC 1759
                      -- Novell, Inc.



Bergman, et al.             Standards Track                    [Page 37]

RFC 3805                     Printer MIB v2                    June 2004


                      --
                      -- prtChannelInformation entry:
                      --
                      -- Printer Agent Name
                      --   Keyword:      PA
                      --   Syntax:       Name
                      --   Status:       Mandatory
                      --   Multiplicity: Single
                      --   Description:  The NDPS Printer
                      --                 Agent Name
                  chIPP(44),  -- Not in RFC 1759
                      -- Internet Printing Protocol (IPP),
                      -- (IPP/1.1 - see [RFC2910] and [RFC2911])
                      -- also applies to all future versions of IPP.
                      --
                      -- IPP Printer URI
                      --   Keyword:      URI
                      --   Syntax:       URI (Unicode UTF-8 per
                      --                 [RFC2396])
                      --   Status:       Mandatory
                      --   Multiplicity: Single
                      --   Default:      not applicable
                      --   Description:  URI of this IPP Printer
                      --     within Internet naming scope.  Unicode
                      --     UTF-8 [RFC3629] string with
                      --     hexadecimal escapes for any non-ASCII
                      --     characters (per [RFC2396]).
                      --   Conformance: An IPP Printer shall list all
                      --     IPP URI it supports (one per IPP Channel
                      --     entry).  If a URI contains the 'http:'
                      --     scheme it must have an explicit port.
                      --   See: [RFC3629], [RFC2396], [RFC2910],
                     --     [RFC2911].
                      --
                      -- IPP Printer Client Authentication
                      --   Keyword:      Auth
                      --   Syntax:       Keyword
                      --   Status:       Optional
                      --   Multiplicity: Single
                      --   Default:      'none'
                      --   Description:  A client authentication
                      --     mechanism supported for this IPP Printer
                      --     URI:
                      --       'none'
                      --         no client authentication mechanism
                      --       'requesting-user-name'
                      --         authenticated user in 'requesting-
                      --         user-name'



Bergman, et al.             Standards Track                    [Page 38]

RFC 3805                     Printer MIB v2                    June 2004


                      --       'basic'
                      --         authenticated user via HTTP Basic
                      --         mechanism
                      --       'digest'
                      --         authenticated user via HTTP Digest
                      --         mechanism
                      --       'certificate'
                      --         authenticated user via certificate
                      --         mechanism
                      --   Conformance: An IPP Printer should list
                      --     all IPP client authentication mechanisms
                      --     it supports (one per IPP Channel entry).
                      --     See: [RFC2911] and [RFC2910].
                      --
                      -- IPP Printer Security
                      --   Keyword:      Security
                      --   Syntax:       Keyword
                      --   Status:       Optional
                      --   Multiplicity: Single
                      --   Default:      'none'
                      --   Description:  A security mechanism
                      --     supported for this IPP Printer URI:
                      --     'none'
                      --       no security mechanism
                      --     'ssl3'
                      --       SSL3 secure communications channel
                      --       protocol
                      --     'tls'
                      --       TLS secure communications channel
                      --       protocol
                      --   Conformance: An IPP Printer should list
                      --     all IPP security mechanisms it supports
                      --     (one per IPP Channel entry).
                      --   See: [RFC2246], [RFC2911].
                      --
                      -- IPP Printer Protocol Version
                      --   Keyword:      Version
                      --   Syntax:       Keyword
                      --   Status:       Optional
                      --   Multiplicity: Multiple
                      --   Default:      '1.1'
                      --   Description:  All of the IPP protocol
                      --     versions (major.minor) supported for
                      --     this IPP Printer URI:
                      --     '1.0'
                      --       IPP/1.0 conforming Printer
                      --     '1.1'
                      --       IPP/1.1 conforming Printer



Bergman, et al.             Standards Track                    [Page 39]

RFC 3805                     Printer MIB v2                    June 2004


                      --   Conformance:  An IPP Printer should list
                      --     all IPP versions it supports (all listed
                      --     in each IPP Channel entry).  An IPP
                      --     Client should select the highest
                      --     numbered version the IPP Client supports
                      --     for use in all IPP Requests (for optimum
                      --     interworking).
                      --   See: [RFC2911].
                  chSMTP(45)
                      -- Print Job submission via Simple Mail
                      -- Transfer Protocol (SMTP) - see [RFC2821]
                      --
                      -- prtChannelInformation entry:
                      --
                      --   Keyword:      Mailto
                      --   Syntax:       Name
                      --   Status:       Mandatory
                      --   Multiplicity: Single
                      --   Default:      not applicable
                      --   Description:  The SMTP URL of the printer.
}

--
-- Interpreter Group TEXTUAL-CONVENTIONs
--

PrtInterpreterLangFamilyTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtInterpreterLangFamily in RFC 1759.
    STATUS    current
    DESCRIPTION
        "This enumeration indicates the type of interpreter that is
        receiving jobs."
    SYNTAX    INTEGER {
        other(1),
        unknown(2),          -- Not in RFC 1759
        langPCL(3),          -- PCL.  Starting with PCL version 5,
                             -- HP-GL/2 is included as part of the
                             -- PCL language.
                             -- PCL and HP-GL/2 are registered
                             -- trademarks of Hewlett-Packard
                             -- Company.
        langHPGL(4),         -- Hewlett-Packard Graphics Language.
                             -- HP-GL is a registered trademark of
                             -- Hewlett-Packard Company.
        langPJL(5),          -- Peripheral Job Language.  Appears in
                             -- the data stream between data intended
                             -- for a page description language.
                             -- Hewlett-Packard Co.



Bergman, et al.             Standards Track                    [Page 40]

RFC 3805                     Printer MIB v2                    June 2004


        langPS(6),           -- PostScript (tm) Language
                             -- Postscript - a trademark of Adobe
                             -- Systems Incorporated which may be
                             -- registered in certain jurisdictions
        langIPDS(7),         -- Intelligent Printer Data Stream
                             -- Bi-directional print data stream for
                             -- documents consisting of data objects
                             -- (text, image, graphics, bar codes),
                             -- resources (fonts, overlays) and page,
                             -- form and finishing instructions.
                             -- Facilitates system level device
                             -- control, document tracking and error
                             -- recovery throughout the print
                             -- process.
                             -- IBM Corporation.
        langPPDS(8),         -- IBM Personal Printer Data Stream.
                             -- Originally called IBM ASCII, the name
                             -- was changed to PPDS when the Laser
                             -- Printer was introduced in 1989.
                             -- Lexmark International, Inc.
        langEscapeP(9),      -- Epson Corp.
        langEpson(10),
        langDDIF(11),        -- Digital Document Interchange Format
                             -- Digital Equipment Corp., Maynard MA
        langInterpress(12),
                             -- Xerox Corp.
        langISO6429(13),     -- ISO 6429.  Control functions for
                             -- Coded Character Sets (has ASCII
                             -- control characters, plus additional
                             -- controls for
                             -- character imaging devices.)
        langLineData(14),    -- line-data:  Lines of data as
                             -- separate ASCII or EBCDIC records
                             -- and containing no control functions
                             -- (no CR, LF, HT, FF, etc.)
                             -- For use with traditional line
                             -- printers.  May use CR and/or LF to
                             -- delimit lines, instead of records.
                             -- See ISO 10175 Document Printing
                             -- Application (DPA) [ISO10175].
        langMODCA(15),       -- Mixed Object Document Content
                             -- Architecture
                             -- Definitions that allow the
                             -- composition, interchange, and
                             -- presentation of final form
                             -- documents as a collection of data
                             -- objects (text, image, graphics, bar
                             -- codes), resources (fonts, overlays)



Bergman, et al.             Standards Track                    [Page 41]

RFC 3805                     Printer MIB v2                    June 2004


                             -- and page, form and finishing
                             -- instructions.
                             -- IBM Corporation.
        langREGIS(16),       -- Remote Graphics Instruction Set,
                             -- Digital Equipment Corp., Maynard MA
        langSCS(17),         -- SNA Character String
                             -- Bi-directional print data stream for
                             -- SNA LU-1 mode of communication.
                             -- IBM
        langSPDL(18),        -- ISO 10180 Standard Page Description
                             -- Language
                             -- ISO Standard
        langTEK4014(19),     -- Tektronix Corp.
        langPDS(20),
        langIGP(21),         -- Printronix Corp.
        langCodeV(22),       -- Magnum Code-V, Image and printer
                             -- control language used to control
                             -- impact/dot-matrix printers.
                             -- QMS, Inc., Mobile AL
        langDSCDSE(23),      -- DSC-DSE:  Data Stream Compatible and
                             -- Emulation Bi-directional print data
                             -- stream for non-SNA (DSC) and SNA LU-3
                             -- 3270 controller (DSE) communications
                             -- IBM
        langWPS(24),         -- Windows Printing System, Resource
                             -- based command/data stream used by
                             -- Microsoft At Work Peripherals.
                             -- Developed by the Microsoft
                             -- Corporation.
        langLN03(25),        -- Early DEC-PPL3, Digital Equipment
                             -- Corp.
        langCCITT(26),
        langQUIC(27),        -- QUIC (Quality Information Code), Page
                             -- Description Language for laser
                             -- printers.  Included graphics, printer
                             -- control capability and emulation of
                             -- other well-known printer.
                             -- QMS, Inc.
        langCPAP(28),        -- Common Printer Access Protocol
                             -- Digital Equipment Corp.
        langDecPPL(29),      -- Digital ANSI-Compliant Printing
                             -- Protocol
                             -- (DEC-PPL)
                             -- Digital Equipment Corp.
        langSimpleText(30),
                             -- simple-text:  character coded data,
                             -- including NUL, CR , LF, HT, and FF
                             -- control characters.  See ISO 10175



Bergman, et al.             Standards Track                    [Page 42]

RFC 3805                     Printer MIB v2                    June 2004


                             -- Document Printing Application (DPA)
                             -- [ISO10175].
        langNPAP(31),        -- Network Printer Alliance Protocol
                             -- (NPAP).  This protocol has been
                             -- superseded by the IEEE 1284.1 TIPSI
                             -- Std (ref. LangTIPSI(49)).
        langDOC(32),         -- Document Option Commands, Appears in
                             -- the data stream between data
                             -- intended for a page description.
                             -- QMS, Inc.
        langimPress(33),     -- imPRESS, Page description language
                             -- originally developed for the
                             -- ImageServer product line. A binary
                             -- language providing representations
                             -- of text, simple graphics, and some
                             -- large forms (simple
                             -- bit-map and CCITT group 3/4
                             -- encoded).The
                             -- language was intended to be sent over
                             -- an 8-bit channel and supported early
                             -- document preparation languages (e.g.,
                             -- TeX and TROFF).
                             -- QMS, Inc.
        langPinwriter(34),
                             -- 24 wire dot matrix printer  for
                             -- USA, Europe, and Asia except
                             -- Japan.
                             -- More widely used in Germany, and
                             -- some Asian countries than in US.
                             -- NEC
        langNPDL(35),        -- Page printer  for Japanese market.
                             -- NEC
        langNEC201PL(36),    -- Serial printer language used in
                             -- the Japanese market.
                             -- NEC
        langAutomatic(37),
                             -- Automatic PDL sensing.  Automatic
                             -- sensing of the interpreter
                             -- language family by the printer
                             -- examining the document content.
                             -- Which actual interpreter language
                             -- families are sensed depends on
                             -- the printer implementation.
        langPages(38),       -- Page printer Advanced Graphic
                             -- Escape Set
                             -- IBM Japan
        langLIPS(39),        -- LBP Image Processing System
        langTIFF(40),        -- Tagged Image File Format (Aldus)



Bergman, et al.             Standards Track                    [Page 43]

RFC 3805                     Printer MIB v2                    June 2004


        langDiagnostic(41),
                             -- A hex dump of the input to the
                             -- interpreter
        langPSPrinter(42),
                             -- The PostScript Language used for
                             -- control (with any PDLs)
                             -- Adobe Systems Incorporated
        langCaPSL(43),       -- Canon Print Systems Language
        langEXCL(44),        -- Extended Command Language
                             -- Talaris Systems Inc.
        langLCDS(45),        -- Line Conditioned Data Stream
                             -- Xerox Corporation
        langXES(46),         -- Xerox Escape Sequences
                             -- Xerox Corporation
        langPCLXL(47),       -- Not in RFC 1759
                             -- Printer Control Language. Extended
                             -- language features for printing, and
                             -- printer control.
                             -- Hewlett-Packard Co.
        langART(48),         -- Not in RFC 1759
                             -- Advanced Rendering Tools (ART).
                             -- Page Description language
                             -- originally developed for the Laser
                             -- Press printers.
                             -- Technical reference manual: "ART IV
                             -- Reference Manual", No F33M.
                             -- Fuji Xerox Co., Ltd.
        langTIPSI(49),       -- Not in RFC 1759
                             -- Transport Independent Printer
                             -- System Interface (ref. IEEE Std.
                             -- 1284.1)
        langPrescribe(50),   -- Not in RFC 1759
                             -- Page description and printer
                             -- control language. It can be
                             -- described with ordinary ASCII
                             -- Technical reference manual:
                             -- "PRESCRIBE II Programming Manual"
        langLinePrinter(51), -- Not in RFC 1759
                             -- A simple-text character stream which
                             -- supports the control codes LF, VT,
                             -- FF, and plus Centronics or
                             -- Dataproducts Vertical Format Unit
                             -- (VFU) language is commonly used on
                             -- many older model line and matrix
                             -- printers.
        langIDP(52),         -- Not in RFC 1759
                             -- Imaging Device Protocol
                             -- Apple Computer.



Bergman, et al.             Standards Track                    [Page 44]

RFC 3805                     Printer MIB v2                    June 2004


        langXJCL(53),        -- Not in RFC 1759
                             -- Xerox Job Control Language (JCL).
                             -- A Job Control language originally
                             -- developed for the LaserPress printers
                             -- and is capable of switching PDLs.
                             -- Technical reference manual:
                             -- "ART IV Reference Manual", No F33M.
                             -- Fuji Xerox Co., Ltd.
        langPDF(54),         -- Not in RFC 1759
                             -- Adobe Portable Document Format
                             -- Adobe Systems, Inc.
        langRPDL(55),        -- Not in RFC 1759
                             -- Ricoh Page Description Language for
                             -- printers.
                             -- Technical manual "RPDL command
                             -- reference" No.307029
                             -- RICOH, Co. LTD
        langIntermecIPL(56), -- Not in RFC 1759
                             -- Intermec Printer Language for label
                             -- printers.
                             -- Technical Manual: "IPL Programmers
                             -- Reference Manual"
                             -- Intermec Corporation
        langUBIFingerprint(57),  -- Not in RFC 1759
                             -- An intelligent basic-like programming
                             -- language for label printers.
                             -- Reference Manual: "UBI Fingerprint
                             -- 7.1", No. 1-960434-00
                             -- United Barcode Industries
        langUBIDirectProtocol(58),  -- Not in RFC 1759
                             -- An intelligent control language for
                             -- label printers.
                             -- Programmers guide: " UBI Direct
                             -- Protocol", No. 1-960419-00
                             -- United Barcode Industries
        langFujitsu(59),     -- Not in RFC 1759
                             -- Fujitsu Printer Language
                             -- Reference Manual:
                             -- "FM Printer Sequence" No. 80HP-0770
                             -- FUJITSU LIMITED
        langCGM(60),         -- Not in RFC 1759
                             -- Computer Graphics Metafile
                             -- MIME type 'image/cgm'
        langJPEG(61),        -- Not in RFC 1759
                             -- Joint Photographic Experts Group
                             -- MIME type 'image/jpeg'
        langCALS1(62),       -- Not in RFC 1759
                             -- US DOD CALS1 (see MIL-STD-1840)



Bergman, et al.             Standards Track                    [Page 45]

RFC 3805                     Printer MIB v2                    June 2004


                             -- MIME type 'application/cals-1840'
        langCALS2(63),       -- Not in RFC 1759
                             -- US DOD CALS2 (see MIL-STD-1840)
                             -- MIME type 'application/cals-1840'
        langNIRS(64),        -- Not in RFC 1759
                             -- US DOD NIRS (see MIL-STD-1840)
                             -- MIME type 'application/cals-1840'
        langC4(65)           -- Not in RFC 1759
                             -- US DOD C4 (see MIL-STD-1840)
                             -- MIME type 'application/cals-1840'
}

--
-- Input/Output Group TEXTUAL-CONVENTIONs
--

PrtInputTypeTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtInputType in RFC 1759.
    STATUS    current
    DESCRIPTION
        "The type of technology (discriminated primarily according to
        feeder mechanism type) employed by a specific component or
        components."
    SYNTAX    INTEGER {
                  other(1),
                  unknown(2),
                  sheetFeedAutoRemovableTray(3),
                  sheetFeedAutoNonRemovableTray(4),
                  sheetFeedManual(5),
                  continuousRoll(6),
                  continuousFanFold(7)
                  }

PrtOutputTypeTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtOutputType in RFC 1759.
    STATUS    current
    DESCRIPTION
        "The Type of technology supported by this output subunit."
    SYNTAX    INTEGER {
                  other(1),
                  unknown(2),
                  removableBin(3),
                  unRemovableBin(4),
                  continuousRollDevice(5),
                  mailBox(6),
                  continuousFanFold(7)
                  }




Bergman, et al.             Standards Track                    [Page 46]

RFC 3805                     Printer MIB v2                    June 2004


--
-- Marker Group TEXTUAL-CONVENTIONs
--

PrtMarkerMarkTechTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtMarkerMarkTech in RFC 1759.
    STATUS    current
    DESCRIPTION
        "The type of marking technology used for this marking
        subunit."
    SYNTAX    INTEGER {
                  other(1),
                  unknown(2),
                  electrophotographicLED(3),
                  electrophotographicLaser(4),
                  electrophotographicOther(5),
                  impactMovingHeadDotMatrix9pin(6),
                  impactMovingHeadDotMatrix24pin(7),
                  impactMovingHeadDotMatrixOther(8),
                  impactMovingHeadFullyFormed(9),
                  impactBand(10),
                  impactOther(11),
                  inkjetAqueous(12),
                  inkjetSolid(13),
                  inkjetOther(14),
                  pen(15),
                  thermalTransfer(16),
                  thermalSensitive(17),
                  thermalDiffusion(18),
                  thermalOther(19),
                  electroerosion(20),
                  electrostatic(21),
                  photographicMicrofiche(22),
                  photographicImagesetter(23),
                  photographicOther(24),
                  ionDeposition(25),
                  eBeam(26),
                  typesetter(27)
                  }

PrtMarkerSuppliesTypeTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtMarkerSuppliesType in RFC 1759.
    STATUS    current
    DESCRIPTION
        "The type of this supply."
    SYNTAX    INTEGER {
                  other(1),
                  unknown(2),



Bergman, et al.             Standards Track                    [Page 47]

RFC 3805                     Printer MIB v2                    June 2004


                -- Values for Printer MIB
                  toner(3),
                  wasteToner(4),
                  ink(5),
                  inkCartridge(6),
                  inkRibbon(7),
                  wasteInk(8),
                  opc(9),               -- photo conductor
                  developer(10),
                  fuserOil(11),
                  solidWax(12),
                  ribbonWax(13),
                  wasteWax(14),
                  fuser(15),            -- Not in RFC 1759
                  coronaWire(16),       -- Not in RFC 1759
                  fuserOilWick(17),     -- Not in RFC 1759
                  cleanerUnit(18),      -- Not in RFC 1759
                  fuserCleaningPad(19), -- Not in RFC 1759
                  transferUnit(20),     -- Not in RFC 1759
                  tonerCartridge(21),   -- Not in RFC 1759
                  fuserOiler(22),       -- Not in RFC 1759
                -- End of values for Printer MIB
                -- Values for Finisher MIB
                  water(23),            -- Not in RFC 1759
                  wasteWater(24),       -- Not in RFC 1759
                  glueWaterAdditive(25),-- Not in RFC 1759
                  wastePaper(26),       -- Not in RFC 1759
                  bindingSupply(27),    -- Not in RFC 1759
                  bandingSupply(28),    -- Not in RFC 1759
                  stitchingWire(29),    -- Not in RFC 1759
                  shrinkWrap(30),       -- Not in RFC 1759
                  paperWrap(31),        -- Not in RFC 1759
                  staples(32),          -- Not in RFC 1759
                  inserts(33),          -- Not in RFC 1759
                  covers(34)            -- Not in RFC 1759
                -- End of values for Finisher MIB
                  }

--
-- Media Path TEXTUAL-CONVENTIONs
--

PrtMediaPathTypeTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtMediaPathType in RFC 1759.
    STATUS    current
    DESCRIPTION
        "The type of the media path for this media path."
    SYNTAX    INTEGER {



Bergman, et al.             Standards Track                    [Page 48]

RFC 3805                     Printer MIB v2                    June 2004


                  other(1),
                  unknown(2),
                  longEdgeBindingDuplex(3),
                  shortEdgeBindingDuplex(4),
                  simplex(5)
                  }

--
-- Console Group TEXTUAL-CONVENTIONs
--

PrtConsoleColorTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtConsoleColor in RFC 1759.
    STATUS     current
    DESCRIPTION
        "The color of this light."
    SYNTAX    INTEGER {
                  other(1),
                  unknown(2),
                  white(3),
                  red(4),
                  green(5),
                  blue(6),
                  cyan(7),
                  magenta(8),
                  yellow(9),
                  orange(10)        -- Not in RFC 1759
                  }

PrtConsoleDisableTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtConsoleDisable in RFC 1759.
    STATUS     current
    DESCRIPTION
        "This value indicates whether or not input is accepted from
        the operator console.  A value of 'enabled' indicates that
        input is accepted from the console, and a value of 'disabled'
        indicates that input is not accepted from the console. "
    SYNTAX    INTEGER {
                  enabled(3),
                  disabled(4)
                  }

--
-- Alert Group TEXTUAL-CONVENTIONs
--

PrtAlertTrainingLevelTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtAlertTrainingLevel in RFC 1759.



Bergman, et al.             Standards Track                    [Page 49]

RFC 3805                     Printer MIB v2                    June 2004


    STATUS    current
    DESCRIPTION
        "The level of training required to handle this alert, if
        human intervention is required.  The noInterventionRequired
        value should be used if the event does not require any human
        intervention.  The training level is an enumeration that is
        determined and assigned by the printer manufacturer based on
        the information or training required to handle this alert.
        The printer will break alerts into these different training
        levels.  It is the responsibility of a management application
        in the system to determine how a particular alert is handled
        and how and to whom that alert is routed.  The following are
        the four training levels of alerts:

        Field Service - Alerts that typically require advanced
            training and technical knowledge of the printer and its
            subunits.  An example of a technical person would be a
            manufacturer's Field Service representative, or other
            person formally trained by the manufacturer or similar
            representative.
        Trained - Alerts that require an intermediate or moderate
            knowledge of the printer and its subunits.  A typical
            example of such an alert is replacing a toner cartridge.
        Untrained -     Alerts that can be fixed without prior
            training either because the action to correct the alert
            is obvious or the printer can help the untrained person
            fix the problem.  A typical example of such an alert is
            reloading paper trays or emptying output bins on a low
            end printer.
        Management -    Alerts that have to do with overall operation
            of and configuration of the printer.  Examples of such
            management events are configuration change of subunits."
    SYNTAX    INTEGER {
                  other(1),
                  unknown(2),
                  untrained(3),
                  trained(4),
                  fieldService(5),
                  management(6),
                  noInterventionRequired(7)  -- Not in RFC 1759
                 }

PrtAlertGroupTC ::= TEXTUAL-CONVENTION
    -- Values in the range 1 to 29 must not be IANA-assigned without
    -- re-publishing Printer MIB.
    -- Values of 30 and greater are for use in MIBs that augment
    -- the Printer MIB, such as the Finisher MIB.
    -- This TC extracted from prtAlertGroup in RFC 1759.



Bergman, et al.             Standards Track                    [Page 50]

RFC 3805                     Printer MIB v2                    June 2004


    STATUS    current
    DESCRIPTION
        "The type of subunit within the printer model that this alert
        is related.  Input, output, and markers are examples of
        printer model groups, i.e., examples of types of subunits.
        Wherever possible, the enumerations match the sub-identifier
        that identifies the relevant table in the Printer MIB.

        NOTE: Alert type codes have been added for the Host Resources
        MIB storage table and device table.  These additional types
        are for situations in which the printer's storage and device
        objects must generate alerts (and possibly traps for critical
        alerts)."
    SYNTAX    INTEGER {
                  other(1),
                -- (2) is reserved for conformance information
                -- Values for Host Resources MIB
                  hostResourcesMIBStorageTable(3),
                  hostResourcesMIBDeviceTable(4),
                -- Values for Printer MIB
                  generalPrinter(5),
                  cover(6),
                  localization(7),
                  input(8),
                  output(9),
                  marker(10),
                  markerSupplies(11),
                  markerColorant(12),
                  mediaPath(13),
                  channel(14),
                  interpreter(15),
                  consoleDisplayBuffer(16),
                  consoleLights(17),
                  alert(18),                   -- Not in RFC 1759
                -- Values (5) to (29) reserved for Printer MIB
                -- Values for Finisher MIB
                  finDevice(30),               -- Not in RFC 1759
                  finSupply(31),               -- Not in RFC 1759
                  finSupplyMediaInput(32),     -- Not in RFC 1759
                  finAttribute(33)             -- Not in RFC 1759
                -- Values (30) to (39) reserved for Finisher MIB
                  }

PrtAlertCodeTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtAlertCode in RFC 1759.
    STATUS    current
    DESCRIPTION
        "The code that describes the type of alert for this entry in



Bergman, et al.             Standards Track                    [Page 51]

RFC 3805                     Printer MIB v2                    June 2004


        the table.  Binary change event alerts describe states of the
        subunit while unary change event alerts describe a single
        event.  The same alert code can be used for a binary change
        event or a unary change event, depending on implementation.
        Also, the same alert code can be used to indicate a critical
        or non-critical (warning) alert, depending on implementation.
        The value of prtAlertSeverityLevel specifies binary vs. unary
        and critical vs. non-critical for each event for the
        implementation.

        While there are some specific codes for many subunits, the
        generic codes should be used for most subunit alerts.  The
        network management station can then query the subunit
        specified by prtAlertGroup to determine further subunit
        status and other subunit information.

        An agent shall not add two entries to the alert table for the
        same event, one containing a generic event code and the other
        containing a specific event code; the agent shall add only
        one entry in the alert table for each event; either generic
        (preferred) or specific, not both.

        Implementation of the unary change event
        alertRemovalOfBinaryChangeEntry(1801) is optional.  When
        implemented, this alert code shall indicate to network
        management stations that the trailing edge of a binary change
        event has occurred and the corresponding alert entry has been
        removed from the alert table.  As with all events, the
        alertRemovalOfBinaryChangeEntry(1801) alert shall be placed
        at the end of the alert table.  Such an alert table entry
        shall specify the following information:

        prtAlertSeverityLevel   warningUnaryChangeEvent(4)
        prtAlertTrainingLevel   noInterventionRequired(7)
        prtAlertGroup           alert(18)
        prtAlertGroupIndex      the index of the row in the
                                alert table of the binary
                                change event that this event
                                has removed.
        prtAlertLocation        unknown (-2)
        prtAlertCode            alertRemovalOfBinaryChangeEntry(1801)
        prtAlertDescription     <description or null string>
        prtAlertTime            the value of sysUpTime at
                                the time of the removal of the
                                binary change event from the
                                alert table.

        Optionally, the agent may generate a trap coincident with



Bergman, et al.             Standards Track                    [Page 52]

RFC 3805                     Printer MIB v2                    June 2004


        removing the binary change event and placing the unary change
        event alertRemovalOfBinaryChangeEntry(1801) in the alert
        table.  For such a trap, the prtAlertIndex sent with the above
        trap parameters shall be the index of the
        alertRemovalOfBinaryChangeEvent row that was added to the
        prtAlertTable; not the index of the row that was removed from
        the prtAlertTable."
    SYNTAX    INTEGER {
                  other(1),
                      -- an event that is not represented
                      -- by one of the alert codes
                      -- specified below.
                  unknown(2),
                      -- The following generic codes are common to
                      -- multiple groups.  The NMS may examine the
                      -- prtAlertGroup object to determine what group
                      -- to query for further information.
                  coverOpen(3),
                  coverClosed(4),
                  interlockOpen(5),
                  interlockClosed(6),
                  configurationChange(7),
                  jam(8),
                  subunitMissing(9),           -- Not in RFC 1759
                      -- The subunit tray, bin, etc.
                      -- has been removed.
                  subunitLifeAlmostOver(10),   -- Not in RFC 1759
                  subunitLifeOver(11),         -- Not in RFC 1759
                  subunitAlmostEmpty(12),      -- Not in RFC 1759
                  subunitEmpty(13),            -- Not in RFC 1759
                  subunitAlmostFull(14),       -- Not in RFC 1759
                  subunitFull(15),             -- Not in RFC 1759
                  subunitNearLimit(16),        -- Not in RFC 1759
                  subunitAtLimit(17),          -- Not in RFC 1759
                  subunitOpened(18),           -- Not in RFC 1759
                  subunitClosed(19),           -- Not in RFC 1759
                  subunitTurnedOn(20),         -- Not in RFC 1759
                  subunitTurnedOff(21),        -- Not in RFC 1759
                  subunitOffline(22),          -- Not in RFC 1759
                  subunitPowerSaver(23),       -- Not in RFC 1759
                  subunitWarmingUp(24),        -- Not in RFC 1759
                  subunitAdded(25),            -- Not in RFC 1759
                  subunitRemoved(26),          -- Not in RFC 1759
                  subunitResourceAdded(27),    -- Not in RFC 1759
                  subunitResourceRemoved(28),  -- Not in RFC 1759
                  subunitRecoverableFailure(29),
                                               -- Not in RFC 1759
                  subunitUnrecoverableFailure(30),



Bergman, et al.             Standards Track                    [Page 53]

RFC 3805                     Printer MIB v2                    June 2004


                                               -- Not in RFC 1759
                  subunitRecoverableStorageError(31),
                                               -- Not in RFC 1759
                  subunitUnrecoverableStorageError(32),
                                               -- Not in RFC 1759
                  subunitMotorFailure(33),     -- Not in RFC 1759
                  subunitMemoryExhausted(34),  -- Not in RFC 1759
                  subunitUnderTemperature(35), -- Not in RFC 1759
                  subunitOverTemperature(36),  -- Not in RFC 1759
                  subunitTimingFailure(37),    -- Not in RFC 1759
                  subunitThermistorFailure(38), -- Not in RFC 1759

                -- General Printer group
                  doorOpen(501),    -- DEPRECATED
                                    -- Use coverOpened(3)
                  doorClosed(502),  -- DEPRECATED
                                    -- Use coverClosed(4)
                  powerUp(503),
                  powerDown(504),
                  printerNMSReset(505),        -- Not in RFC 1759
                      -- The printer has been reset by some
                      -- network management station(NMS)
                      -- writing into 'prtGeneralReset'.
                  printerManualReset(506),     -- Not in RFC 1759
                      -- The printer has been reset manually.
                  printerReadyToPrint(507),    -- Not in RFC 1759
                      -- The printer is ready to print. (i.e.,
                      -- not warming up, not in power save
                      -- state, not adjusting print quality,
                      -- etc.).

                -- Input Group
                  inputMediaTrayMissing(801),
                  inputMediaSizeChange(802),
                  inputMediaWeightChange(803),
                  inputMediaTypeChange(804),
                  inputMediaColorChange(805),
                  inputMediaFormPartsChange(806),
                  inputMediaSupplyLow(807),
                  inputMediaSupplyEmpty(808),
                  inputMediaChangeRequest(809), -- Not in RFC 1759
                      -- An interpreter has detected that a
                      -- different medium is need in this input
                      -- tray subunit.  The prtAlertDescription may
                      -- be used to convey a human readable
                      -- description of the medium required to
                      -- satisfy the request.
                  inputManualInputRequest(810), -- Not in RFC 1759



Bergman, et al.             Standards Track                    [Page 54]

RFC 3805                     Printer MIB v2                    June 2004


                      -- An interpreter has detected that manual
                      -- input is required in this subunit.  The
                      -- prtAlertDescription may be used to convey
                      -- a human readable description of the medium
                      -- required to satisfy the request.
                  inputTrayPositionFailure(811), -- Not in RFC 1759
                      -- The input tray failed to position correctly.
                  inputTrayElevationFailure(812),
                                        -- Not in RFC 1759
                  inputCannotFeedSizeSelected(813),
                                        -- Not in RFC 1759
                -- Output Group
                  outputMediaTrayMissing(901),
                  outputMediaTrayAlmostFull(902),
                  outputMediaTrayFull(903),
                  outputMailboxSelectFailure(904),
                                        -- Not in RFC 1759
                -- Marker group
                  markerFuserUnderTemperature(1001),
                  markerFuserOverTemperature(1002),
                  markerFuserTimingFailure(1003),
                                        -- Not in RFC 1759
                  markerFuserThermistorFailure(1004),
                                        -- Not in RFC 1759
                  markerAdjustingPrintQuality(1005),
                                        -- Not in RFC 1759
                -- Marker Supplies group
                  markerTonerEmpty(1101),
                  markerInkEmpty(1102),
                  markerPrintRibbonEmpty(1103),
                  markerTonerAlmostEmpty(1104),
                  markerInkAlmostEmpty(1105),
                  markerPrintRibbonAlmostEmpty(1106),
                  markerWasteTonerReceptacleAlmostFull(1107),
                  markerWasteInkReceptacleAlmostFull(1108),
                  markerWasteTonerReceptacleFull(1109),
                  markerWasteInkReceptacleFull(1110),
                  markerOpcLifeAlmostOver(1111),
                  markerOpcLifeOver(1112),
                  markerDeveloperAlmostEmpty(1113),
                  markerDeveloperEmpty(1114),
                  markerTonerCartridgeMissing(1115),
                                        -- Not in RFC 1759
                -- Media Path Device Group
                  mediaPathMediaTrayMissing(1301),
                  mediaPathMediaTrayAlmostFull(1302),
                  mediaPathMediaTrayFull(1303),
                  mediaPathCannotDuplexMediaSelected(1304),



Bergman, et al.             Standards Track                    [Page 55]

RFC 3805                     Printer MIB v2                    June 2004


                                        -- Not in RFC 1759
                -- Interpreter Group
                  interpreterMemoryIncrease(1501),
                  interpreterMemoryDecrease(1502),
                  interpreterCartridgeAdded(1503),
                  interpreterCartridgeDeleted(1504),
                  interpreterResourceAdded(1505),
                  interpreterResourceDeleted(1506),
                  interpreterResourceUnavailable(1507),
                  interpreterComplexPageEncountered(1509),
                                        -- Not in RFC 1759
                      -- The interpreter has encountered a page
                      -- that is too complex for the resources that
                      -- are available.
                -- Alert Group
                  alertRemovalOfBinaryChangeEntry(1801)
                                        -- Not in RFC 1759
                      -- A binary change event entry has been
                      -- removed from the alert table.  This unary
                      -- change alert table entry is added to the
                      -- end of the alert table.
                  }
END

6.  The Printer MIB

Printer-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32, TimeTicks,
        NOTIFICATION-TYPE, OBJECT-IDENTITY,
        mib-2 FROM SNMPv2-SMI                             -- [RFC2578]
    TEXTUAL-CONVENTION FROM SNMPv2-TC                     -- [RFC2579]
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
        FROM SNMPv2-CONF                                  -- [RFC2580]
    hrDeviceIndex, hrStorageIndex FROM HOST-RESOURCES-MIB -- [RFC2790]
    InterfaceIndexOrZero FROM IF-MIB                      -- [RFC2863]
    PrtCoverStatusTC, PrtGeneralResetTC, PrtChannelTypeTC,
        PrtInterpreterLangFamilyTC, PrtInputTypeTC, PrtOutputTypeTC,
        PrtMarkerMarkTechTC, PrtMarkerSuppliesTypeTC, PrtConsoleColorTC,
        PrtConsoleDisableTC, PrtMediaPathTypeTC, PrtAlertGroupTC,
        PrtAlertTrainingLevelTC, PrtAlertCodeTC
        FROM IANA-PRINTER-MIB
    IANACharset FROM IANA-CHARSET-MIB;

printmib MODULE-IDENTITY
    LAST-UPDATED "200406020000Z"
    ORGANIZATION "PWG IEEE/ISTO Printer Working Group"



Bergman, et al.             Standards Track                    [Page 56]

RFC 3805                     Printer MIB v2                    June 2004


    CONTACT-INFO
        "Harry Lewis
        IBM
        Phone (303) 924-5337
        Email: harryl@us.ibm.com
        http://www.pwg.org/index.html

        Send comments to the printmib WG using the Printer MIB
        Project (PMP) Mailing List:  pmp@pwg.org

        For further information, access the PWG web page under 'Printer
        MIB':      http://www.pwg.org/

        Implementers of this specification are encouraged to join the
        pmp mailing list in order to participate in discussions on any
        clarifications needed and registration proposals being reviewed
        in order to achieve consensus."
    DESCRIPTION
        "The MIB module for management of printers.
         Copyright (C) The Internet Society (2004). This
         version of this MIB module was published
         in RFC 3805. For full legal notices see the RFC itself."
    REVISION     "200406020000Z"
    DESCRIPTION
        "Printer MIB v2.
        Moved all enum groups to be maintained by IANA into new TCs
           within the ianaPrinterMIB, which is contained in this
           document.
        New TCs created from enums defined within RFC 1759 Objects:
           PrtPrintOrientationTC, PrtLocalizedDescriptionStringTC,
           PrtConsoleDescriptionStringTC, PrtChannelStateTC,
           PrtOutputStackingOrderTC, PrtOutputPageDeliveryOrientationTC,
           PrtMarkerCounterUnitTC, PrtMarkerSuppliesSupplyUnitTC,
           PrtMarkerSuppliesClassTC, PrtMarkerAddressabilityUnitTC,
           PrtMarkerColorantRoleTC, PrtMediaPathMaxSpeedPrintUnitTC,
           PrtInterpreterTwoWayTC, and PrtAlertSeverityLevelTC.
        The following four TCs have been deprecated:
           MediaUnit (replaced by PrtMediaUnitTC),
           CapacityUnit (replaced by PrtCapacityUnitTC),
           SubUnitStatus (replaced by PrtSubUnitStatusTC),
           CodedCharSet (replaced by IANACharset in IANA Charset MIB)
        Five new OBJECT-GROUPs: prtAuxilliarySheetGroup,
           prtInputSwitchingGroup, prtGeneralV2Group,
           prtAlertTableV2Group, prtChannelV2Group.
        Nine new objects added to those groups:
           prtAuxiliarySheetStartupPage, prtAuxiliarySheetBannerPage,
           prtGeneralPrinterName, prtGeneralSerialNumber,
           prtAlertCriticalEvents, prtAlertAllEvents,



Bergman, et al.             Standards Track                    [Page 57]

RFC 3805                     Printer MIB v2                    June 2004


           prtInputMediaLoadTimeout, prtInputNextIndex,
           prtChannelInformation.
        SYNTAX range changed from (0..65535) to (1..65535) for the
           index objects prtStorageRefSeqNumber, prtDeviceRefSeqNumber,
           and prtConsoleLightIndex.
        SYNTAX range changed from (0..65535) to (0..2147483647) for the
           objects prtStorageRefIndex and prtDeviceRefIndex to agree
           with the Host Resources MIB.
        Defined a range for the objects with a SYNTAX of Integer32:
           prtOutputDefaultIndex, prtInputMediaDimFeedDirDeclared,
           prtInputMediaDimXFeedDirDeclared, prtInputMaxCapacity,
           prtInputCurrentLevel, prtInputMediaDimFeedDirChosen,
           prtInputMediaDimXFeedDirChosen, prtInputMediaWeight,
           prtInputMediaFormParts, prtOutputIndex,
           prtOutputMaxCapacity, prtOutputRemainingCapacity,
           prtOutputMaxDimFeedDir, prtOutputMaxDimXFeedDir,
           prtOutputMinDimFeedDir, prtOutputMinDimXFeedDir,
           prtMarkerAddressibilityFeedDir,
           prtMarkerAddressibilityXFeedDir, prtMarkerNorthMargin,
           prtMarkerSouthMargin, prtMarkerWestMargin,
           prtMarkerEastMargin, prtMarkerSuppliesMaxCapacity,
           prtMarkerSuppliesLevel, prtMarkerColorantTonality,
           prtMediaPathMaxSpeed, prtMediaPathMaxMediaFeedDir,
           prtMediaPathMaxMediaXFeedDir, prtMediaPathMinMediaFeedDir,
           prtMediaPathMinMediaXFeedDir, prtChannelIndex,
           prtChannelCurrentJobCntlLangIndex, prtInterpreterIndex,
           prtChannelDefaultPageDescLangIndex, prtConsoleOnTime,
           prtInterpreterFeedAddressibility, prtConsoleOffTime,
           prtInterpreterXFeedAddressibility, prtAlertIndex,
           prtAlertGroupIndex, prtAlertLocation.
        Changed SYNTAX from Integer32 to InterfaceIndexOrZero for
           prtChannelIfIndex.
        Changed MAX-ACCESS of prtAlertIndex from not-accessible to
           Read-only and added a compliance statement to allow a
           MIN-ACCESS of accessible-for-notify.
        One new NOTIFICATION-GROUP: prtAlertTrapGroup which contains
           printerV2Alert.
        In MODULE-COMPLIANCE prtMIBCompliance, new OBJECT-GROUPs and
           the NOTIFICATION_GROUP, all in GROUP (not MANDATORY-GROUP)
           clauses.  The nine new objects are optional, i.e., this
           document is backward compatible with RFC 1759."
    REVISION     "199411250000Z"
    DESCRIPTION
        "The original version of this MIB, published as RFC1759."
    ::= { mib-2 43 }






Bergman, et al.             Standards Track                    [Page 58]

RFC 3805                     Printer MIB v2                    June 2004


-- TEXTUAL-CONVENTIONs for this MIB module
--
-- Generic unspecific TEXTUAL-CONVENTIONs
--

PrtMediaUnitTC ::= TEXTUAL-CONVENTION
    -- Replaces MediaUnit in RFC 1759.
    STATUS    current
    DESCRIPTION
        "Units of measure for media dimensions."
    SYNTAX    INTEGER {
                  tenThousandthsOfInches(3),  -- .0001
                  micrometers(4)
                  }

MediaUnit ::= TEXTUAL-CONVENTION
    -- Replaced by PrtMediaUnitTC.
    STATUS    deprecated
    DESCRIPTION
        "Units of measure for media dimensions."
    SYNTAX    INTEGER {
                  tenThousandthsOfInches(3),  -- .0001
                  micrometers(4)
                  }

PrtCapacityUnitTC ::= TEXTUAL-CONVENTION
    -- Replaces CapacityUnit in RFC 1759.
    STATUS    current
    DESCRIPTION
        "Units of measure for media capacity."
    SYNTAX    INTEGER {
                  other(1),                   -- New, not in RFC 1759
                  unknown(2),                 -- New, not in RFC 1759
                  tenThousandthsOfInches(3),  -- .0001
                  micrometers(4),
                  sheets(8),
                  feet(16),
                  meters(17),
                -- Values for Finisher MIB
                  items(18),                  -- New, not in RFC 1759
                  percent(19)                 -- New, not in RFC 1759
                  }

CapacityUnit ::= TEXTUAL-CONVENTION
    -- Replaced by PrtCapacityUnitTC.
    STATUS    deprecated
    DESCRIPTION
        "Units of measure for media capacity."



Bergman, et al.             Standards Track                    [Page 59]

RFC 3805                     Printer MIB v2                    June 2004


    SYNTAX    INTEGER {
                  tenThousandthsOfInches(3),  -- .0001
                  micrometers(4),
                  sheets(8),
                  feet(16),
                  meters(17)
                  }

PrtPrintOrientationTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtInterpreterDefaultOrientation in
    -- RFC 1759.
    STATUS    current
    DESCRIPTION
        "A generic representation for printing orientation on a
        'page'."
    SYNTAX    INTEGER {
                  other(1),
                  portrait(3),
                  landscape(4)
                  }

PrtSubUnitStatusTC ::= TEXTUAL-CONVENTION
    -- Replaces SubUnitStatus in RFC 1759.
    STATUS    current
    DESCRIPTION
        "Status of a printer sub-unit.

        The SubUnitStatus is an integer that is the sum of 5 distinct
        values, Availability, Non-Critical, Critical, On-line, and
        Transitioning. These values are:

        Availability                           Value

            Available and Idle                  0       0000'b
            Available and Standby               2       0010'b
            Available and Active                4       0100'b
            Available and Busy                  6       0110'b
            Unavailable and OnRequest           1       0001'b
            Unavailable because Broken          3       0011'b
            Unknown                             5       0101'b

        Non-Critical
            No Non-Critical Alerts              0       0000'b
            Non-Critical Alerts                 8       1000'b

        Critical

            No Critical Alerts                  0       0000'b



Bergman, et al.             Standards Track                    [Page 60]

RFC 3805                     Printer MIB v2                    June 2004


            Critical Alerts                    16     1 0000'b

        On-Line

            State is On-Line                    0       0000'b
            State is Off-Line                  32    10 0000'b

        Transitioning

            At intended state                   0       0000'b
            Transitioning to intended state    64   100 0000'b"

    SYNTAX    INTEGER (0..126)

SubUnitStatus ::= TEXTUAL-CONVENTION
   -- Replaced by PrtSubUnitStatusTC.
    STATUS    deprecated
    DESCRIPTION
        "Status of a printer sub-unit.

        The SubUnitStatus is an integer that is the sum of 5 distinct
        values, Availability, Non-Critical, Critical, On-line, and
        Transitioning. These values are:

        Availability                           Value
            Available and Idle                  0       0000'b
            Available and Standby               2       0010'b
            Available and Active                4       0100'b
            Available and Busy                  6       0110'b
            Unavailable and OnRequest           1       0001'b
            Unavailable because Broken          3       0011'b
            Unknown                             5       0101'b

        Non-Critical
            No Non-Critical Alerts              0       0000'b
            Non-Critical Alerts                 8       1000'b

        Critical

            No Critical Alerts                  0       0000'b
            Critical Alerts                    16     1 0000'b

        On-Line

            State is On-Line                    0       0000'b
            State is Off-Line                  32    10 0000'b

        Transitioning



Bergman, et al.             Standards Track                    [Page 61]

RFC 3805                     Printer MIB v2                    June 2004


            At intended state                   0       0000'b
            Transitioning to intended state    64   100 0000'b"

    SYNTAX    INTEGER (0..126)

PresentOnOff ::= TEXTUAL-CONVENTION
    STATUS    current
    DESCRIPTION
        "Presence and configuration of a device or feature."
    SYNTAX    INTEGER {
                  other(1),
                  on(3),
                  off(4),
                  notPresent(5)
                  }

PrtLocalizedDescriptionStringTC ::= TEXTUAL-CONVENTION
    -- This TC did not appear in RFC 1759.
    STATUS    current
    DESCRIPTION
        "An object MUST use this TEXTUAL-CONVENTION when its
        'charset' is controlled by the value of
        prtGeneralCurrentLocalization."
    SYNTAX    OCTET STRING (SIZE(0..255))

PrtConsoleDescriptionStringTC ::= TEXTUAL-CONVENTION
    -- This TC did not appear in RFC 1759.
    STATUS    current
    DESCRIPTION
        "An object MUST use this TEXTUAL-CONVENTION when its
        'charset' is controlled by the value of
        prtConsoleLocalization."
    SYNTAX    OCTET STRING (SIZE(0..255))

CodedCharSet ::= TEXTUAL-CONVENTION

   -- Replaced by IANACharset TEXTUAL-CONVENTION in IANA Charset MIB.
    STATUS     deprecated
    DESCRIPTION
       "The original description clause from RFC 1759 [RFC1759] was
       technically inaccurate and therefore has been deleted."
   SYNTAX     INTEGER {
     other(1)               -- used if the designated coded
                            -- character set is not currently in
                            -- the enumeration
}

--



Bergman, et al.             Standards Track                    [Page 62]

RFC 3805                     Printer MIB v2                    June 2004


-- Channel Group TEXTUAL-CONVENTIONs
--

PrtChannelStateTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtChannelState in RFC 1759.
    STATUS    current
    DESCRIPTION
        "The state of this print job delivery channel. The value
        determines whether print data is allowed through this channel."
    SYNTAX    INTEGER {
                  other(1),
                  printDataAccepted(3),
                  noDataAccepted(4)
                  }

--
-- Input/Output Group TEXTUAL-CONVENTIONs
--

PrtOutputStackingOrderTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtOutputStackingOrder in RFC 1759.
    STATUS    current
    DESCRIPTION
        "The current state of the stacking order for the associated
        output sub-unit. 'firstToLast' means that as pages are output,
        the front of the next page is placed against the back of the
        previous page. 'lastToFirst' means that as pages are output,
        the back of the next page is placed against the front of the
        previous page."
    SYNTAX    INTEGER {
                  unknown(2),
                  firstToLast(3),
                  lastToFirst(4)
                  }

PrtOutputPageDeliveryOrientationTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtOutputPageDeliveryOrientation
    -- in RFC 1759.
    STATUS    current
    DESCRIPTION
        "The reading surface that will be 'up' when pages are delivered
        to the associated output sub-unit. Values are Face-Up and Face
        Down (Note: interpretation of these values is, in general,
        context-dependent based on locale; presentation of these values
        to an end-user should be normalized to the expectations of the
        user."
    SYNTAX    INTEGER {
                  faceUp(3),



Bergman, et al.             Standards Track                    [Page 63]

RFC 3805                     Printer MIB v2                    June 2004


                  faceDown(4)
                  }

--
-- Marker Group TEXTUAL-CONVENTIONs
--

PrtMarkerCounterUnitTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtMarkerCounterUnit in RFC 1759.
    STATUS    current
    DESCRIPTION
        "The unit that will be used by the printer when reporting
        counter values for this marking sub-unit.  The
        time units of measure are provided for a device like a
        strip recorder that does not or cannot track the physical
        dimensions of the media and does not use characters,
        lines or sheets."

    SYNTAX    INTEGER {
                  tenThousandthsOfInches(3),  -- .0001
                  micrometers(4),
                  characters(5),
                  lines(6),
                  impressions(7),
                  sheets(8),
                  dotRow(9),
                  hours(11),
                  feet(16),
                  meters(17)
                  }

PrtMarkerSuppliesSupplyUnitTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtMarkerSuppliesSupplyUnit
    -- in RFC 1759.
    STATUS    current
    DESCRIPTION
        "Unit of this marker supply container/receptacle."
    SYNTAX    INTEGER {
                  other(1),                   -- New, not in RFC 1759
                  unknown(2),                 -- New, not in RFC 1759
                  tenThousandthsOfInches(3),  -- .0001
                  micrometers(4),
                  impressions(7),             -- New, not in RFC 1759
                  sheets(8),                  -- New, not in RFC 1759
                  hours(11),                  -- New, not in RFC 1759
                  thousandthsOfOunces(12),
                  tenthsOfGrams(13),
                  hundrethsOfFluidOunces(14),



Bergman, et al.             Standards Track                    [Page 64]

RFC 3805                     Printer MIB v2                    June 2004


                  tenthsOfMilliliters(15),
                  feet(16),                   -- New, not in RFC 1759
                  meters(17),                 -- New, not in RFC 1759
                -- Values for Finisher MIB
                  items(18),  -- e.g., #staples. New, not in RFC 1759
                  percent(19)                 -- New, not in RFC 1759
                  }

PrtMarkerSuppliesClassTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtMarkerSuppliesClass in RFC 1759.
    STATUS    current
    DESCRIPTION
        "Indicates whether this supply entity represents a supply
        that is consumed or a receptacle that is filled."
    SYNTAX    INTEGER {
                  other(1),
                  supplyThatIsConsumed(3),
                  receptacleThatIsFilled(4)
                  }

PrtMarkerColorantRoleTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtMarkerColorantRole in RFC 1759.
    STATUS    current
    DESCRIPTION
        "The role played by this colorant."
    SYNTAX    INTEGER { --  Colorant Role
                  other(1),
                  process(3),
                  spot(4)
                  }

PrtMarkerAddressabilityUnitTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtMarkerAddressabilityUnit
    -- in RFC 1759.
    STATUS    current
    DESCRIPTION
        "The unit of measure of distances, as applied to the marker's
        resolution."
    SYNTAX    INTEGER {
                  tenThousandthsOfInches(3), -- .0001
                  micrometers(4)
                  }

--
-- Media Path TEXTUAL-CONVENTIONs
--

PrtMediaPathMaxSpeedPrintUnitTC ::= TEXTUAL-CONVENTION



Bergman, et al.             Standards Track                    [Page 65]

RFC 3805                     Printer MIB v2                    June 2004


    -- This TC was extracted from prtMediaPathMaxSpeedPrintUnit
    -- in RFC 1759.
    STATUS    current
    DESCRIPTION
        "The unit of measure used in specifying the speed of all
        media paths in the printer."
    SYNTAX    INTEGER {
                  tenThousandthsOfInchesPerHour(3),-- .0001/hour
                  micrometersPerHour(4),
                  charactersPerHour(5),
                  linesPerHour(6),
                  impressionsPerHour(7),
                  sheetsPerHour(8),
                  dotRowPerHour(9),
                  feetPerHour(16),
                  metersPerHour(17)
                 }

--
-- Interpreter Group TEXTUAL-CONVENTIONs
--

PrtInterpreterTwoWayTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtInterpreterTwoWay in RFC 1759.
    STATUS    current
    DESCRIPTION
        "Indicates whether or not this interpreter returns information
        back to the host."
    SYNTAX    INTEGER {
                  yes(3),
                  no(4)
                  }

--
-- Alert Group TEXTUAL-CONVENTIONs
--

PrtAlertSeverityLevelTC ::= TEXTUAL-CONVENTION
    -- This TC was extracted from prtAlertSeverityLevel in RFC 1759.
    STATUS    current
    DESCRIPTION
        "The level of severity of this alert table entry.  The printer
        determines the severity level assigned to each entry in the
        table. A critical alert is binary by nature and definition. A
        warning is defined to be a non-critical alert. The original and
        most common warning is unary. The binary warning was added later
        and given a more distinguished name."
    SYNTAX    INTEGER {



Bergman, et al.             Standards Track                    [Page 66]

RFC 3805                     Printer MIB v2                    June 2004


                  other(1),
                  critical(3),
                  warning(4),
                  warningBinaryChangeEvent(5)   -- New, not in RFC 1759
                  }

-- The General Printer Group
--
-- The general printer sub-unit is responsible for the overall
-- control and status of the printer.  There is exactly one
-- general printer sub-unit in a printer.

prtGeneral OBJECT IDENTIFIER ::= { printmib 5 }

prtGeneralTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF PrtGeneralEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A table of general information per printer.
        Objects in this table are defined in various
        places in the MIB, nearby the groups to
        which they apply.  They are all defined
        here to minimize the number of tables that would
        otherwise need to exist."
    ::= { prtGeneral 1 }

prtGeneralEntry OBJECT-TYPE
    SYNTAX     PrtGeneralEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "An entry exists in this table for each device entry in the
        host resources MIB device table with a device type of
        'printer'.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    INDEX    { hrDeviceIndex }
    ::= { prtGeneralTable 1 }

PrtGeneralEntry ::= SEQUENCE {
    -- Note that not all of the objects in this sequence are in
    -- the general printer group. The group to which an
    -- object belongs is tagged with a label "General", "Input"
    -- "Output", etc. after each entry in the following sequence.
    --
    prtGeneralConfigChanges         Counter32, -- General



Bergman, et al.             Standards Track                    [Page 67]

RFC 3805                     Printer MIB v2                    June 2004


    prtGeneralCurrentLocalization   Integer32, -- General
    prtGeneralReset                 PrtGeneralResetTC,
                                               -- General
    prtGeneralCurrentOperator       OCTET STRING,
                                               -- Responsible Party
    prtGeneralServicePerson         OCTET STRING,
                                               -- Responsible Party
    prtInputDefaultIndex            Integer32, -- Input
    prtOutputDefaultIndex           Integer32, -- Output
    prtMarkerDefaultIndex           Integer32, -- Marker
    prtMediaPathDefaultIndex        Integer32, -- Media Path
    prtConsoleLocalization          Integer32, -- Console
    prtConsoleNumberOfDisplayLines  Integer32, -- Console
    prtConsoleNumberOfDisplayChars  Integer32, -- Console
    prtConsoleDisable               PrtConsoleDisableTC,
                                               -- Console,
    prtAuxiliarySheetStartupPage    PresentOnOff,
                                               -- AuxiliarySheet
    prtAuxiliarySheetBannerPage     PresentOnOff,
                                               -- AuxiliarySheet
    prtGeneralPrinterName           OCTET STRING,
                                               -- General V2
    prtGeneralSerialNumber          OCTET STRING,
                                               -- General V2
    prtAlertCriticalEvents          Counter32, -- Alert V2
    prtAlertAllEvents               Counter32  -- Alert V2
    }

prtGeneralConfigChanges OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "Counts configuration changes within the printer. A
        configuration change is defined to be an action that results in
        a change to any MIB object other than those that reflect status
        or level, or those that act as counters or gauges. In addition,
        any action that results in a row being added or deleted from
        any table in the Printer MIB is considered a configuration
        change. Such changes will often affect the capability of the
        printer to service certain types of print jobs. Management
        applications may cache infrequently changed configuration
        information about sub units within the printer. This object
        should be incremented whenever the agent wishes to notify
        management applications that any cached configuration
        information for this device is to be considered 'stale'. At
        this point, the management application should flush any
        configuration information cached about this device and fetch



Bergman, et al.             Standards Track                    [Page 68]

RFC 3805                     Printer MIB v2                    June 2004


        new configuration information.

        The following are examples of actions that would cause the
        prtGeneralConfigChanges object to be incremented:

        - Adding an output bin
        - Changing the media in a sensing input tray
        - Changing the value of prtInputMediaType

        Note that the prtGeneralConfigChanges counter would not be
        incremented when an input tray is temporarily removed to load
        additional paper or when the level of an input device changes.

        NOTE: The above description has been modified from RFC 1759
        for clarification."

    ::= { prtGeneralEntry 1 }

prtGeneralCurrentLocalization OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of the prtLocalizationIndex corresponding to the
        current language, country, and character set to be used for
        localized string values that are identified as being dependent
        on the value of this object.  Note that this object does not
        apply to localized strings in the prtConsole group or to any
        object that is not explicitly identified as being localized
        according to prtGeneralCurrentLocalization.  When an object's
        'charset' is controlled by the value of
        prtGeneralCurrentLocalization, it MUST specify
        PrtLocalizedDescriptionStringTC as its syntax.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
   ::= { prtGeneralEntry 2 }

prtGeneralReset OBJECT-TYPE
    -- NOTE: In RFC 1759, the enumeration values were implicitly defined
    -- by this object.
    SYNTAX     PrtGeneralResetTC
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Setting this value to 'powerCycleReset', 'resetToNVRAM', or
        'resetToFactoryDefaults' will result in the resetting of the
        printer.  When read, this object will always have the value



Bergman, et al.             Standards Track                    [Page 69]

RFC 3805                     Printer MIB v2                    June 2004


        'notResetting(3)', and a SET of the value 'notResetting' shall
        have no effect on the printer.  Some of the defined values are
        optional.  However, every implementation must support at least
        the values 'notResetting' and 'resetToNVRAM'."
    ::= { prtGeneralEntry 3 }

-- The Responsible Party group

prtGeneralCurrentOperator OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..127))
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The name of the person who is responsible for operating
        this printer.  It is suggested that this string include
        information that would enable other humans to reach the
        operator, such as a phone number.  As a convention to
        facilitate automatic notification of the operator by the
        agent or network management station, the phone number,
        fax number or email address should be indicated by the
        URL schemes 'tel:', 'fax:' and 'mailto:', respectively.
        If either the phone, fax, or email information is not
        available, then a line should not be included for this
        information.

        NOTE: For interoperability purposes, it is advisable to
        use email addresses formatted according to [RFC2822]
        requirements.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtGeneralEntry 4 }

prtGeneralServicePerson OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..127))
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The name of the person responsible for servicing this
        printer.  It is suggested that this string include
        information that would enable other humans to reach the
        service person, such as a phone number.  As a convention
        to facilitate automatic notification of the operator by
        the agent or network management station, the phone
        number, fax number or email address should be indicated
        by the URL schemes 'tel:', 'fax:' and 'mailto:',
        respectively.  If either the phone, fax, or email
        information is not available, then a line should not



Bergman, et al.             Standards Track                    [Page 70]

RFC 3805                     Printer MIB v2                    June 2004


        be included for this information.

        NOTE: For interoperability purposes, it is advisable to use
        email addresses formatted per [RFC2822] requirements.

        NOTE: The above description has been modified from RFC 1759
        for clarification."

    ::= { prtGeneralEntry 5 }

-- Default indexes section
--
-- The following four objects are used to specify the indexes of
-- certain subunits used as defaults during the printing process.

prtInputDefaultIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of prtInputIndex corresponding to the default input
        sub-unit: that is, this object selects the default source of
        input media."
::= { prtGeneralEntry 6 }

prtOutputDefaultIndex OBJECT-TYPE
    --  A range has been added to the SYNTAX clause that was not in
    --  RFC 1759.  Although this violates SNMP compatibility rules,
    --  it provides a more reasonable guide for SNMP managers.
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of prtOutputIndex corresponding to the default
        output sub-unit; that is, this object selects the default
        output destination."
::= { prtGeneralEntry 7 }

prtMarkerDefaultIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of prtMarkerIndex corresponding to the
        default marker sub-unit; that is, this object selects the
        default marker."
    ::= { prtGeneralEntry 8 }




Bergman, et al.             Standards Track                    [Page 71]

RFC 3805                     Printer MIB v2                    June 2004


prtMediaPathDefaultIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of prtMediaPathIndex corresponding to
        the default media path; that is, the selection of the
        default media path."
    ::= { prtGeneralEntry 9 }

-- Console general section
--
-- The following four objects describe overall parameters of the
-- printer console subsystem.

prtConsoleLocalization OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of the prtLocalizationIndex corresponding to
        the language, country, and character set to be used for the
        console.  This localization applies both to the actual display
        on the console as well as the encoding of these console objects
        in management operations.  When an object's 'charset' is
        controlled by the value of prtConsoleLocalization, it MUST
        specify PrtConsoleDescriptionStringTC as its syntax.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtGeneralEntry 10 }

prtConsoleNumberOfDisplayLines OBJECT-TYPE
    SYNTAX     Integer32 (0..65535)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of lines on the printer's physical
        display.  This value is 0 if there are no lines on the
        physical display or if there is no physical display"
    ::= { prtGeneralEntry 11 }

prtConsoleNumberOfDisplayChars OBJECT-TYPE
    SYNTAX     Integer32 (0..65535)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of characters per line displayed on the physical



Bergman, et al.             Standards Track                    [Page 72]

RFC 3805                     Printer MIB v2                    June 2004


        display.  This value is 0 if there are no lines on the physical
        display or if there is no physical display"
    ::= { prtGeneralEntry 12 }

prtConsoleDisable OBJECT-TYPE
    -- In RFC 1759, the enumeration values were implicitly defined
    -- by this object.
    SYNTAX     PrtConsoleDisableTC
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This value indicates how input is (or is not) accepted from
        the operator console.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtGeneralEntry 13 }

-- The Auxiliary Sheet Group
--
-- The auxiliary sheet group allows the administrator to control
-- the production of auxiliary sheets by the printer.  This group
-- contains only the "prtAuxiliarySheetStartupPage" and
-- "prtAuxiliarySheetBannerPage" objects.

prtAuxiliarySheetStartupPage OBJECT-TYPE
    SYNTAX     PresentOnOff
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Used to enable or disable printing a startup page.  If enabled,
        a startup page will be printed shortly after power-up, when the
        device is ready.  Typical startup pages include test patterns
        and/or printer configuration information."
    ::= { prtGeneralEntry 14 }

prtAuxiliarySheetBannerPage OBJECT-TYPE
    SYNTAX     PresentOnOff
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Used to enable or disable printing banner pages at the
        beginning of jobs.  This is a master switch which applies to all
        jobs, regardless of interpreter."
     ::= { prtGeneralEntry 15 }






Bergman, et al.             Standards Track                    [Page 73]

RFC 3805                     Printer MIB v2                    June 2004


-- Administrative section  (The General V2 Group)
--
-- The following two objects are used to specify administrative
-- information assigned to the printer.

prtGeneralPrinterName OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (0..127))
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "An administrator-specified name for this printer.  Depending
        upon implementation of this printer, the value of this object
        may or may not be same as the value for the MIB-II 'SysName'
        object."
     ::= { prtGeneralEntry 16 }

prtGeneralSerialNumber OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (0..255))
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "A recorded serial number for this device that indexes some
        type device catalog or inventory.  This value is usually set by
        the device manufacturer but the MIB supports the option of
        writing for this object for site-specific administration of
        device inventory or tracking."
    ::= { prtGeneralEntry 17 }

-- General alert table section  (Alert Table V2 Group)
--
-- The following two objects are used to specify counters
-- associated with the Alert Table.

prtAlertCriticalEvents OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A running counter of the number of critical alert events that
        have been recorded in the alert table.  The value of this object
        is RESET in the event of a power cycle operation (i.e., the
        value is not persistent."
    ::= { prtGeneralEntry 18 }

prtAlertAllEvents OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current



Bergman, et al.             Standards Track                    [Page 74]

RFC 3805                     Printer MIB v2                    June 2004


    DESCRIPTION
        "A running counter of the total number of alert event entries
        (critical and non-critical) that have been recorded in the
        alert table"
    ::= { prtGeneralEntry 19 }

-- The Cover Table
--
-- The cover portion of the General print sub-unit describes the
-- covers and interlocks of the printer.  The Cover Table has an
-- entry for each cover and interlock.

prtCover OBJECT IDENTIFIER ::= { printmib 6 }

prtCoverTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF PrtCoverEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A table of the covers and interlocks of the printer."
    ::= { prtCover 1 }

prtCoverEntry OBJECT-TYPE
    SYNTAX     PrtCoverEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "Information about a cover or interlock.
        Entries may exist in the table for each device
        index with a device type of 'printer'.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    INDEX  { hrDeviceIndex, prtCoverIndex }
    ::= { prtCoverTable 1 }

PrtCoverEntry ::= SEQUENCE {
    prtCoverIndex            Integer32,
    prtCoverDescription      PrtLocalizedDescriptionStringTC,
    prtCoverStatus           PrtCoverStatusTC
    }

prtCoverIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A unique value used by the printer to identify this Cover sub



Bergman, et al.             Standards Track                    [Page 75]

RFC 3805                     Printer MIB v2                    June 2004


        unit.  Although these values may change due to a major
        reconfiguration of the device (e.g., the addition of new cover
        sub-units to the printer), values SHOULD remain stable across
        successive printer power cycles.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtCoverEntry 1 }

prtCoverDescription OBJECT-TYPE
    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
    -- to a TC to better support localization of the object.
    SYNTAX     PrtLocalizedDescriptionStringTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The manufacturer provided cover sub-mechanism name in the
        localization specified by prtGeneralCurrentLocalization."
    ::= { prtCoverEntry 2 }

prtCoverStatus  OBJECT-TYPE
    -- NOTE: In RFC 1759, the enumeration values were implicitly defined
    -- by this object and are now defined in the IANA-PRINTER-MIB.  The
    -- new TC has defined "coverOpen" and "coverClosed" to replace
    -- "doorOpen" and "doorClosed" in RFC 1759.  A name change is not
    -- formally allowed per SMI rules, but was agreed to by the WG group
    -- since a door has a more restrictive meaning than a cover and
    -- Cover group is intended to support doors as a subset of covers.

   SYNTAX     PrtCoverStatusTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The status of this cover sub-unit."
    ::= { prtCoverEntry 3 }

-- The Localization Table
--
-- The localization portion of the General printer sub-unit is
-- responsible for identifying the natural language, country, and
-- character set in which character strings are expressed.  There
-- may be one or more localizations supported per printer.  The
-- available localizations are represented by the Localization
-- table.

prtLocalization  OBJECT IDENTIFIER ::= { printmib 7 }

prtLocalizationTable OBJECT-TYPE



Bergman, et al.             Standards Track                    [Page 76]

RFC 3805                     Printer MIB v2                    June 2004


    SYNTAX     SEQUENCE OF PrtLocalizationEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The available localizations in this printer."
    ::= { prtLocalization 1 }

prtLocalizationEntry OBJECT-TYPE
    SYNTAX     PrtLocalizationEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A description of a localization.
        Entries may exist in the table for each device
        index with a device type of 'printer'.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    INDEX  { hrDeviceIndex, prtLocalizationIndex }
    ::= { prtLocalizationTable 1 }

PrtLocalizationEntry ::= SEQUENCE {
    prtLocalizationIndex          Integer32,
    prtLocalizationLanguage       OCTET STRING,
    prtLocalizationCountry        OCTET STRING,
    prtLocalizationCharacterSet   IANACharset
    }

prtLocalizationIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A unique value used by the printer to identify this
        localization entry.  Although these values may change due to a
        major reconfiguration of the device (e.g., the addition of new
        localization data to the printer), values SHOULD remain
        stable across successive printer power cycles.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtLocalizationEntry 1 }

prtLocalizationLanguage OBJECT-TYPE
    -- Note: The size is fixed, was incorrectly 0..2 in RFC 1759.
    SYNTAX     OCTET STRING (SIZE(2))
    MAX-ACCESS read-only
    STATUS     current



Bergman, et al.             Standards Track                    [Page 77]

RFC 3805                     Printer MIB v2                    June 2004


    DESCRIPTION
        "A two character language code from ISO 639.  Examples en,
        es, fr, de.  NOTE: These examples were shown as upper case in
        RFC 1759 and are now shown as lower case to agree with ISO 639."
    ::= { prtLocalizationEntry 2 }

prtLocalizationCountry OBJECT-TYPE
    -- Note: The size is fixed, was incorrectly 0..2 in RFC 1759.
    SYNTAX     OCTET STRING (SIZE(2))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A two character country code from ISO 3166, a blank string
        (two space characters) shall indicate that the country is not
        defined.  Examples: US, GB, FR, DE, ..."
    ::= { prtLocalizationEntry 3 }

prtLocalizationCharacterSet OBJECT-TYPE
    SYNTAX     IANACharset
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
      "The coded character set used for this localization."
    ::= { prtLocalizationEntry 4 }

-- The System Resources Tables
--
-- The Printer MIB makes use of the Host Resources MIB to
-- define system resources by referencing the storage
-- and device groups of the print group.

prtStorageRefTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF PrtStorageRefEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "This table defines which printer, amongst multiple printers
        serviced by one agent, owns which storage units.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtGeneral 2 }

prtStorageRefEntry OBJECT-TYPE
    SYNTAX     PrtStorageRefEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION



Bergman, et al.             Standards Track                    [Page 78]

RFC 3805                     Printer MIB v2                    June 2004


        "This table will have an entry for each entry in the Host
        Resources MIB storage table that represents storage associated
        with a printer managed by this agent.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    INDEX      { hrStorageIndex, prtStorageRefSeqNumber }
    ::= { prtStorageRefTable 1 }

PrtStorageRefEntry ::= SEQUENCE {
    prtStorageRefSeqNumber  Integer32,
    prtStorageRefIndex      Integer32
    }

prtStorageRefSeqNumber OBJECT-TYPE
    -- NOTE: The range has been changed from RFC 1759, which allowed a
    -- minumum value of zero.  This was incorrect, since zero is not a
    -- valid index.
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "This value will be unique amongst all entries with a common
        value of hrStorageIndex. This object allows a storage entry to
        point to the multiple printer devices with which it is
        associated."
    ::= { prtStorageRefEntry 1 }

prtStorageRefIndex OBJECT-TYPE
    -- NOTE: The range has been changed from RFC 1759 to be compatible
    -- with the defined range of hrDeviceIndex.
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The value of the hrDeviceIndex of the printer device that this
        storageEntry is associated with."
    ::= { prtStorageRefEntry 2 }

prtDeviceRefTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF PrtDeviceRefEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "This table defines which printer, amongst multiple printers
        serviced by one agent, is associated with which devices.

        NOTE: The above description has been modified from RFC 1759



Bergman, et al.             Standards Track                    [Page 79]

RFC 3805                     Printer MIB v2                    June 2004


        for clarification."
    ::= { prtGeneral 3 }

prtDeviceRefEntry OBJECT-TYPE
    SYNTAX     PrtDeviceRefEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "This table will have an entry for each entry in the Host
        Resources MIB device table that represents a device associated
        with a printer managed by this agent.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    INDEX      { hrDeviceIndex, prtDeviceRefSeqNumber }
    ::= { prtDeviceRefTable 1 }

PrtDeviceRefEntry ::= SEQUENCE {
    prtDeviceRefSeqNumber   Integer32,
    prtDeviceRefIndex       Integer32
    }

prtDeviceRefSeqNumber OBJECT-TYPE
    -- NOTE: The range has been changed from RFC 1759, which allowed a
    -- minumum value of zero.  This was incorrect, since zero is not a
    -- valid index.
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "This value will be unique amongst all entries with a common
        value of hrDeviceIndex. This object allows a device entry to
        point to the multiple printer devices with which it is
        associated."
    ::= { prtDeviceRefEntry 1 }

prtDeviceRefIndex OBJECT-TYPE
    -- NOTE: The range has been changed from RFC 1759 to be compatible
    -- with the defined range of hrDeviceIndex.
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The value of the hrDeviceIndex of the printer device that this
        deviceEntry is associated with."
    ::= { prtDeviceRefEntry 2 }





Bergman, et al.             Standards Track                    [Page 80]

RFC 3805                     Printer MIB v2                    June 2004


-- The Input Group
--
-- Input sub-units are managed as a tabular, indexed collection
-- of possible devices capable of providing media for input to
-- the printing process.  Input sub-units typically have a
-- location, a type, an identifier, a set of constraints on
-- possible media sizes and potentially other media
-- characteristics, and may be capable of indicating current
-- status or capacity.

prtInput   OBJECT IDENTIFIER ::= { printmib 8 }

prtInputTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF PrtInputEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A table of the devices capable of providing media for input to
        the printing process."
    ::= { prtInput 2 }

prtInputEntry OBJECT-TYPE
    SYNTAX     PrtInputEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "Attributes of a device capable of providing media for input to
        the printing process.  Entries may exist in the table for each
        device index with a device type of 'printer'.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    INDEX  { hrDeviceIndex, prtInputIndex }
    ::= { prtInputTable 1 }

PrtInputEntry ::= SEQUENCE {
    prtInputIndex                     Integer32,
    prtInputType                      PrtInputTypeTC,
    prtInputDimUnit                   PrtMediaUnitTC,
    prtInputMediaDimFeedDirDeclared   Integer32,
    prtInputMediaDimXFeedDirDeclared  Integer32,
    prtInputMediaDimFeedDirChosen     Integer32,
    prtInputMediaDimXFeedDirChosen    Integer32,
    prtInputCapacityUnit              PrtCapacityUnitTC,
    prtInputMaxCapacity               Integer32,
    prtInputCurrentLevel              Integer32,
    prtInputStatus                    PrtSubUnitStatusTC,
    prtInputMediaName                 OCTET STRING,



Bergman, et al.             Standards Track                    [Page 81]

RFC 3805                     Printer MIB v2                    June 2004


    prtInputName                      OCTET STRING,
    prtInputVendorName                OCTET STRING,
    prtInputModel                     OCTET STRING,
    prtInputVersion                   OCTET STRING,
    prtInputSerialNumber              OCTET STRING,
    prtInputDescription               PrtLocalizedDescriptionStringTC,
    prtInputSecurity                  PresentOnOff,
    prtInputMediaWeight               Integer32,
    prtInputMediaType                 OCTET STRING,
    prtInputMediaColor                OCTET STRING,
    prtInputMediaFormParts            Integer32,
    prtInputMediaLoadTimeout          Integer32,
    prtInputNextIndex                 Integer32
    }

prtInputIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A unique value used by the printer to identify this input
        sub-unit.  Although these values may change due to a major
        reconfiguration of the device (e.g., the addition of new input
        sub-units to the printer), values SHOULD remain stable across
        successive printer power cycles.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtInputEntry 1 }

prtInputType OBJECT-TYPE
    -- NOTE: In RFC 1759, the enumeration values were implicitly
    -- defined by this object.
    SYNTAX     PrtInputTypeTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The type of technology (discriminated primarily according to
        feeder mechanism type) employed by the input sub-unit.  Note,
        the Input Class provides for a descriptor field to further
        qualify the other choice."
    ::= { prtInputEntry 2 }

prtInputDimUnit OBJECT-TYPE
    SYNTAX     PrtMediaUnitTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION



Bergman, et al.             Standards Track                    [Page 82]

RFC 3805                     Printer MIB v2                    June 2004


        "The unit of measurement for use calculating and relaying
         dimensional values for this input sub-unit."
    ::= { prtInputEntry 3 }

prtInputMediaDimFeedDirDeclared OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object provides the value of the declared dimension, in
        the feed direction, of the media that is (or, if empty, was or
        will be) in this input sub-unit.  The feed direction is the
        direction in which the media is fed on this sub-unit.  This
        dimension is measured in input sub-unit dimensional units
        (controlled by prtInputDimUnit, which uses PrtMediaUnitTC).  If
        this input sub-unit can reliably sense this value, the value is
        sensed by the printer and may not be changed by management
        requests.  Otherwise, the value may be changed.  The value (-1)
        means other and specifically means that this sub-unit places no
        restriction on this parameter.  The value (-2) indicates
        unknown."
    ::= { prtInputEntry 4 }

prtInputMediaDimXFeedDirDeclared OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object provides the value of the declared dimension, in
        the cross feed direction, of the media that is (or, if empty,
        was or will be) in this input sub-unit.  The cross  feed
        direction is ninety degrees relative to the feed direction
        associated with this sub-unit.  This dimension is measured in
        input sub-unit dimensional units (controlled by
        prtInputDimUnit,which uses PrtMediaUnitTC).  If this input sub-
        unit can reliably sense this value, the value is sensed by the
        printer and may not be changed by management requests.
        Otherwise, the value may be changed.  The value (-1) means other
        and specifically means that this sub-unit places no restriction
        on this parameter.  The value (-2) indicates unknown."
    ::= { prtInputEntry 5 }

prtInputMediaDimFeedDirChosen OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-only



Bergman, et al.             Standards Track                    [Page 83]

RFC 3805                     Printer MIB v2                    June 2004


    STATUS     current
    DESCRIPTION
        "The printer will act as if media of the chosen dimension (in
        the feed direction) is present in this input source.  Note that
        this value will be used even if the input tray is empty.  Feed
        dimension measurements are taken relative to the feed direction
        associated with that sub-unit and are in input sub-unit
        dimensional units (controlled by prtInputDimUnit, which uses
        PrtMediaUnitTC).  If the printer supports the declared
        dimension,the granted dimension is the same as the declared
        dimension.  If not, the granted dimension is set to the closest
        dimension that the printer supports when the declared dimension
        is set.  The value (-1) means other and specifically indicates
        that this sub-unit places no restriction on this parameter.  The
        value (-2)indicates unknown."
    ::= { prtInputEntry 6 }

prtInputMediaDimXFeedDirChosen OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The printer will act as if media of the chosen dimension (in
        the cross feed direction) is present in this input source.  Note
        that this value will be used even if the input tray is empty.
        The cross feed direction is ninety degrees relative to the feed
        direction associated with this sub-unit.  This dimension is
        measured in input sub-unit dimensional units (controlled by
        prtInputDimUnit, which uses PrtMediaUnitTC).  If the printer
        supports the declare dimension, the granted dimension is the
        same as the declared dimension.  If not, the granted dimension
        is set to the closest dimension that the printer supports when
        the declared dimension is set.  The value (-1) means other and
        specifically indicates that this sub-unit places no restriction
        on this parameter.  The value (-2) indicates unknown."
    ::= { prtInputEntry 7 }

prtInputCapacityUnit OBJECT-TYPE
    -- NOTE: In RFC 1759, the enumeration values were implicitly
    -- defined by this object.
    SYNTAX     PrtCapacityUnitTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The unit of measurement for use in calculating and relaying
        capacity values for this input sub-unit."
    ::= { prtInputEntry 8 }



Bergman, et al.             Standards Track                    [Page 84]

RFC 3805                     Printer MIB v2                    June 2004


prtInputMaxCapacity OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The maximum capacity of the input sub-unit in input sub-unit
        capacity units (PrtCapacityUnitTC).  There is no convention
        associated with the media itself so this value reflects claimed
        capacity.  If this input sub-unit can reliably sense this value,
        the value is sensed by the printer and may not be changed by
        management requests; otherwise, the value may be written (by a
        Remote Control Panel or a Management Application). The value
        (-1) means other and specifically indicates that the sub-unit
        places no restrictions on this parameter.  The value (-2) means
        unknown."
    ::= { prtInputEntry 9 }

prtInputCurrentLevel OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-3..2147483647)    -- in capacity units
                                             -- (PrtCapacityUnitTC).
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The current capacity of the input sub-unit in input sub-unit
        capacity units (PrtCapacityUnitTC).  If this input sub-unit can
        reliably sense this value, the value is sensed by the printer
        and may not be changed by management requests; otherwise, the
        value may be written (by a Remote Control Panel or a Management
        Application).  The value (-1) means other and specifically
        indicates that the sub-unit places no restrictions on this
        parameter.  The value (-2) means unknown.  The value (-3) means
        that the printer knows that at least one unit remains."
    ::= { prtInputEntry 10 }

prtInputStatus OBJECT-TYPE
    SYNTAX     PrtSubUnitStatusTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The current status of this input sub-unit."
    ::= { prtInputEntry 11 }

prtInputMediaName OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..63))
    MAX-ACCESS read-write
    STATUS     current



Bergman, et al.             Standards Track                    [Page 85]

RFC 3805                     Printer MIB v2                    June 2004


    DESCRIPTION
        "A description of the media contained in this input sub-unit;
        This description is to be used by a client to format and
        Localize a string for display to a human operator.  This
        description is not processed by the printer.  It is used to
        provide information not expressible in terms of the other
        media attributes (e.g., prtInputMediaDimFeedDirChosen,
        prtInputMediaDimXFeedDirChosen, prtInputMediaWeight,
        prtInputMediaType)."
    -- The following reference was not included in RFC 1759.
    REFERENCE
         "The PWG Standardized Media Names specification [PWGMEDIA]
         contains the recommended values for this object.  See also
         RFC 3805 Appendix C,'Media Names', which lists the values
         Of standardized media names defined in ISO/IEC 10175."
    ::= { prtInputEntry 12 }

--             INPUT MEASUREMENT
--
--     _______ |               |
--      ^      |               |
--      |      |               |                 |
--      |      |_ _ _ _ _ _ _ _| _______________ |direction
--      |      |               |      ^          v
-- MaxCapacity |    Sheets     |      |
--      |      |     left      | CurrentLevel
--      |      |      in       |      |
--      v      |     tray      |      v
--     _______ +_______________+ _______

-- The Extended Input Group

prtInputName OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..63))
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The name assigned to this input sub-unit."
    ::= { prtInputEntry 13 }

prtInputVendorName OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..63))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The vendor name of this input sub-unit."
    ::= { prtInputEntry 14 }




Bergman, et al.             Standards Track                    [Page 86]

RFC 3805                     Printer MIB v2                    June 2004


prtInputModel OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..63))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The model name of this input sub-unit."
    ::= { prtInputEntry 15 }

prtInputVersion OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..63))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The version of this input sub-unit."
    ::= { prtInputEntry 16 }

prtInputSerialNumber OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..32))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The serial number assigned to this input sub-unit."
    ::= { prtInputEntry 17 }

prtInputDescription OBJECT-TYPE
    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
    -- to a TC to better support localization of the object.
    SYNTAX     PrtLocalizedDescriptionStringTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A free-form text description of this input sub-unit in the
        localization specified by  prtGeneralCurrentLocalization."
    ::= { prtInputEntry 18 }

prtInputSecurity OBJECT-TYPE
    SYNTAX     PresentOnOff
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Indicates if this input sub-unit has some security associated
        with it."
    ::= { prtInputEntry 19 }

-- The Input Media Group
--
-- The Input Media Group supports identification of media
-- installed or available for use on a printing device.



Bergman, et al.             Standards Track                    [Page 87]

RFC 3805                     Printer MIB v2                    June 2004


-- Medium resources are identified by name, and include a
-- collection of characteristic attributes that may further be
-- used for selection and management of them.
-- The Input Media group consists of a set of optional
-- "columns" in the Input Table.  In this manner, a minimally
-- conforming implementation may choose to not support reporting
-- of media resources if it cannot do so.

prtInputMediaWeight  OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The weight of the medium associated with this input sub-unit
        in grams / per meter squared.  The value (-2) means unknown."
    ::= { prtInputEntry 20 }

prtInputMediaType OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..63))
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The name of the type of medium associated with this input sub
        unit.  This name need not be processed by the printer; it might
        simply be displayed to an operator.

        NOTE: The above description has been modified from RFC 1759."
    -- The following reference was not included in RFC 1759.
    REFERENCE
        "The PWG Standardized Media Names specification [PWGMEDIA],
        section 3 Media Type Names, contains the recommended values for
        this object.  Implementers may add additional string values.
        The naming conventions in ISO 9070 are recommended in order to
        avoid potential name clashes."
    ::= { prtInputEntry 21 }

prtInputMediaColor OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..63))
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The name of the color of the medium associated with
        this input sub-unit using standardized string values.

        NOTE: The above description has been modified from RFC 1759."
    -- The following reference was not included in RFC 1759.
    REFERENCE



Bergman, et al.             Standards Track                    [Page 88]

RFC 3805                     Printer MIB v2                    June 2004


        "The PWG Standardized Media Names specification [PWGMEDIA],
        section 4 Media Color Names, contains the recommended values
        for this object.  Implementers may add additional string values.
        The naming conventions in ISO 9070 are recommended in order to
        avoid potential name clashes."
    ::= { prtInputEntry 22 }

prtInputMediaFormParts OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The number of parts associated with the medium
        associated with this input sub-unit if the medium is a
        multi-part form.  The value (-1) means other and
        specifically indicates that the device places no
        restrictions on this parameter.  The value (-2) means
        unknown."
    ::= { prtInputEntry 23 }

-- The Input Switching Group
--
-- The input switching group allows the administrator to set the
-- input subunit time-out for the printer and to control the
-- automatic input subunit switching by the printer when an input
-- subunit becomes empty.

prtInputMediaLoadTimeout OBJECT-TYPE
   SYNTAX     Integer32 (-2..2147483647)
   MAX-ACCESS read-write
   STATUS     current
   DESCRIPTION
        "When the printer is not able to print due to a subunit being
        empty or the requested media must be manually loaded, the
        printer will wait for the duration (in seconds) specified by
        this object.  Upon expiration of the time-out, the printer will
        take the action specified by prtInputNextIndex.

        The event which causes the printer to enter the waiting state
        is product specific.  If the printer is not waiting for manually
        fed media, it may switch from an empty subunit to a different
        subunit without waiting for the time-out to expire.

        A value of (-1) implies 'other' or 'infinite' which translates
        to 'wait forever'.  The action which causes printing to continue
        is product specific.  A value of (-2) implies 'unknown'."
   ::= { prtInputEntry 24 }



Bergman, et al.             Standards Track                    [Page 89]

RFC 3805                     Printer MIB v2                    June 2004


prtInputNextIndex OBJECT-TYPE
   SYNTAX     Integer32 (-3..2147483647)
   MAX-ACCESS read-write
   STATUS     current
   DESCRIPTION
        "The value of prtInputIndex corresponding to the input subunit
        which will be used when this input subunit is emptied and the
        time-out specified by prtInputMediaLoadTimeout expires.  A value
        of zero(0) indicates that auto input switching will not occur
        when this input subunit is emptied.  If the time-out specified
        by prtInputLoadMediaTimeout expires and this value is zero(0),
        the job will be aborted.  A value of (-1) means other.  The
        value (-2)means 'unknown' and specifically indicates that an
        implementation specific method will determine the next input
        subunit to use at the time this subunit is emptied and the time
        out expires.  The value(-3) means input switching is not
        supported for this subunit."
   ::= { prtInputEntry 25 }

-- The Output Group
--
-- Output sub-units are managed as a tabular, indexed collection
-- of possible devices capable of receiving media delivered from
-- the printing process.  Output sub-units typically have a
-- location, a type, an identifier, a set of constraints on
-- possible media sizes and potentially other characteristics,
-- and may be capable of indicating current status or capacity.

prtOutput  OBJECT IDENTIFIER ::= { printmib 9 }

prtOutputTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF PrtOutputEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A table of the devices capable of receiving media delivered
        from the printing process."
    ::= { prtOutput 2 }

prtOutputEntry OBJECT-TYPE
    SYNTAX     PrtOutputEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "Attributes of a device capable of receiving media delivered
        from the printing process.  Entries may exist in the table for
        each device index with a device type of 'printer'.




Bergman, et al.             Standards Track                    [Page 90]

RFC 3805                     Printer MIB v2                    June 2004


        NOTE: The above description has been modified from RFC 1759
        for clarification."
   INDEX  { hrDeviceIndex, prtOutputIndex }
    ::= { prtOutputTable 1 }

PrtOutputEntry ::= SEQUENCE {
    prtOutputIndex                    Integer32,
    prtOutputType                     PrtOutputTypeTC,
    prtOutputCapacityUnit             PrtCapacityUnitTC,
    prtOutputMaxCapacity              Integer32,
    prtOutputRemainingCapacity        Integer32,
    prtOutputStatus                   PrtSubUnitStatusTC,
    prtOutputName                     OCTET STRING,
    prtOutputVendorName               OCTET STRING,
    prtOutputModel                    OCTET STRING,
    prtOutputVersion                  OCTET STRING,
    prtOutputSerialNumber             OCTET STRING,
    prtOutputDescription              PrtLocalizedDescriptionStringTC,
    prtOutputSecurity                 PresentOnOff,
    prtOutputDimUnit                  PrtMediaUnitTC,
    prtOutputMaxDimFeedDir            Integer32,
    prtOutputMaxDimXFeedDir           Integer32,
    prtOutputMinDimFeedDir            Integer32,
    prtOutputMinDimXFeedDir           Integer32,
    prtOutputStackingOrder        PrtOutputStackingOrderTC,
    prtOutputPageDeliveryOrientation
                        PrtOutputPageDeliveryOrientationTC,
    prtOutputBursting                 PresentOnOff,
    prtOutputDecollating              PresentOnOff,
    prtOutputPageCollated             PresentOnOff,
    prtOutputOffsetStacking           PresentOnOff
    }

prtOutputIndex OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A unique value used by this printer to identify this output
        sub-unit.  Although these values may change due to a major
        reconfiguration of the sub-unit (e.g., the addition of new
        output devices to the printer), values SHOULD remain stable
        across successive printer power cycles.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtOutputEntry 1 }



Bergman, et al.             Standards Track                    [Page 91]

RFC 3805                     Printer MIB v2                    June 2004


prtOutputType OBJECT-TYPE
    -- NOTE: In RFC 1759, the enumeration values were implicitly defined
    -- by this object.
    SYNTAX     PrtOutputTypeTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The type of technology supported by this output sub-unit."
    ::= { prtOutputEntry 2 }

prtOutputCapacityUnit OBJECT-TYPE
    SYNTAX     PrtCapacityUnitTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The unit of measurement for use in calculating and relaying
        capacity values for this output sub-unit."
    ::= { prtOutputEntry 3 }

prtOutputMaxCapacity OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The maximum capacity of this output sub-unit in output sub-
        unit capacity units (PrtCapacityUnitTC).  There is no convention
        associated with the media itself so this value essentially
        reflects claimed capacity.  If this output sub-unit can reliably
        sense this value, the value is sensed by the printer and may
        not be changed by management requests; otherwise, the value may
        be written (by a Remote Control Panel or a Management
        Application).  The value (-1) means other and specifically
        indicates that the sub-unit places no restrictions on this
        parameter.  The value (-2) means unknown."
    ::= { prtOutputEntry 4 }

prtOutputRemainingCapacity OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-3..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The remaining capacity of the possible output sub-unit
        capacity in output sub-unit capacity units
        (PrtCapacityUnitTC)of this output sub-unit.  If this output sub-
        unit can reliably sense this value, the value is sensed by the
        printer and may not be modified by management requests;



Bergman, et al.             Standards Track                    [Page 92]

RFC 3805                     Printer MIB v2                    June 2004


        otherwise, the value may be written (by a Remote Control Panel
        or a Management Application).  The value (-1) means other and
        specifically indicates that the sub-unit places no restrictions
        on this parameter.  The value (-2) means unknown.  The value
        (-3) means that the printer knows that there remains capacity
        for at least one unit."
    ::= { prtOutputEntry 5 }

prtOutputStatus OBJECT-TYPE
    SYNTAX     PrtSubUnitStatusTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The current status of this output sub-unit."
    ::= { prtOutputEntry 6 }

--            OUTPUT MEASUREMENT
--
--   _______  |                | ________
--      ^     |                |     ^
--      |     |                |     |
--      |     |                |RemainingCapacity
-- MaxCapacity|                |     |
--      |     |                |     v           ^
--      |     |_ _ _ _ _ _ _ _ | _______________ |direction
--      |     |    Sheets      |                 |
--      |     |      in        |
--      v     |    Output      |
--   _______  +________________+

-- The Extended Output Group

prtOutputName OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..63))
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The name assigned to this output sub-unit."
    ::= { prtOutputEntry 7 }

prtOutputVendorName OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..63))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The vendor name of this output sub-unit."
    ::= { prtOutputEntry 8 }




Bergman, et al.             Standards Track                    [Page 93]

RFC 3805                     Printer MIB v2                    June 2004


prtOutputModel OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..63))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The model name assigned to this output sub-unit.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtOutputEntry 9 }

prtOutputVersion OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..63))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The version of this output sub-unit."
    ::= { prtOutputEntry 10 }

prtOutputSerialNumber OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..63))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The serial number assigned to this output sub-unit."
    ::= { prtOutputEntry 11 }

prtOutputDescription OBJECT-TYPE
    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
    -- to a TC to better support localization of the object.
    SYNTAX     PrtLocalizedDescriptionStringTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A free-form text description of this output sub-unit in the
        localization specified by prtGeneralCurrentLocalization."
    ::= { prtOutputEntry 12 }

prtOutputSecurity OBJECT-TYPE
    SYNTAX     PresentOnOff
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Indicates if this output sub-unit has some security associated
        with it and if that security is enabled or not."
    ::= { prtOutputEntry 13 }





Bergman, et al.             Standards Track                    [Page 94]

RFC 3805                     Printer MIB v2                    June 2004


-- The Output Dimensions Group

prtOutputDimUnit OBJECT-TYPE
    SYNTAX     PrtMediaUnitTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The unit of measurement for use in calculating and relaying
        dimensional values for this output sub-unit."
    ::= { prtOutputEntry 14 }

prtOutputMaxDimFeedDir OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The maximum dimensions supported by this output sub-unit
        for measurements taken parallel relative to the feed
        direction associated with that sub-unit in output
        sub-unit dimensional units (controlled by prtOutputDimUnit,
        which uses PrtMediaUnitTC).  If this output sub-unit can
        reliably sense this value, the value is sensed by the printer
        and may not be changed with management protocol operations.
        The value (-1) means other and specifically indicates that the
        sub-unit places no restrictions on this parameter.  The value
        (-2) means unknown.

        NOTE: The above description has been modified from RFC 1759
        for clarification and to explain the purpose of (-1) and (-2)."
    ::= { prtOutputEntry 15 }

prtOutputMaxDimXFeedDir OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The maximum dimensions supported by this output sub-unit
        for measurements taken ninety degrees relative to the
        feed direction associated with that sub-unit in output
        sub-unit dimensional units (controlled by prtOutputDimUnit,
        which uses PrtMediaUnitTC).  If this output sub-unit can
        reliably sense this value, the value is sensed by the printer
        and may not be changed with management protocol operations.
        The value (-1) means other and specifically indicates that the
        sub-unit places no restrictions on this parameter.  The value
        (-2) means unknown.



Bergman, et al.             Standards Track                    [Page 95]

RFC 3805                     Printer MIB v2                    June 2004


        NOTE: The above description has been modified from RFC 1759
        for clarification and to explain the purpose of (-1) and (-2)."
    ::= { prtOutputEntry 16 }

prtOutputMinDimFeedDir OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The minimum dimensions supported by this output sub-unit
        for measurements taken parallel relative to the feed
        direction associated with that sub-unit in output
        sub-unit dimensional units (controlled by prtOutputDimUnit,
        which uses PrtMediaUnitTC).  If this output sub-unit can
        reliably sense this value, the value is sensed by the printer
        and may not be changed with management protocol operations.
        The value (-1) means other and specifically indicates that the
        sub-unit places no restrictions on this parameter.  The value
        (-2) means unknown.

        NOTE: The above description has been modified from RFC 1759
        for clarification and to explain the purpose of (-1) and (-2)."
    ::= { prtOutputEntry 17 }

prtOutputMinDimXFeedDir OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The minimum dimensions supported by this output sub-unit
        for measurements taken ninety degrees relative to the
        feed direction associated with that sub-unit in output
        sub-unit dimensional units (controlled by prtOutputDimUnit,
        which uses PrtMediaUnitTC).  If this output sub-unit can
        reliably sense this value, the value is sensed by the printer
        and may not be changed with management protocol operations.
        The value (-1) means other and specifically indicates that the
        sub-unit places no restrictions on this parameter.  The value
        (-2) means unknown.

        NOTE: The above description has been modified from RFC 1759
        for clarification and to explain the purpose of (-1) and (-2)."
    ::= { prtOutputEntry 18 }






Bergman, et al.             Standards Track                    [Page 96]

RFC 3805                     Printer MIB v2                    June 2004


-- The Output Features Group

prtOutputStackingOrder OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtOutputStackingOrderTC
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The current state of the stacking order for the
        associated output sub-unit. 'FirstToLast' means
        that as pages are output the front of the next page is
        placed against the back of the previous page.
        'LasttoFirst' means that as pages are output the back
        of the next page is placed against the front of the
        previous page."
    ::= { prtOutputEntry 19 }

prtOutputPageDeliveryOrientation OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtOutputPageDeliveryOrientationTC
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The reading surface that will be 'up' when pages are
        delivered to the associated output sub-unit.  Values are
        faceUp and faceDown.  (Note: interpretation of these
        values is in general context-dependent based on locale;
        presentation of these values to an end-user should be
        normalized to the expectations of the user)."
    ::= { prtOutputEntry 20 }

prtOutputBursting OBJECT-TYPE
    SYNTAX     PresentOnOff
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object indicates that the outputting sub-unit supports
        bursting, and if so, whether the feature is enabled.  Bursting
        is the process by which continuous media is separated into
        individual sheets, typically by bursting along pre-formed
        perforations."
    ::= { prtOutputEntry 21 }

prtOutputDecollating OBJECT-TYPE
    SYNTAX     PresentOnOff
    MAX-ACCESS read-write



Bergman, et al.             Standards Track                    [Page 97]

RFC 3805                     Printer MIB v2                    June 2004


    STATUS     current
    DESCRIPTION
        "This object indicates that the output supports decollating,
        and if so, whether the feature is enabled.  Decollating is the
        process by which the individual parts within a multi-part form
        are separated and sorted into separate stacks for each part."
    ::= { prtOutputEntry 22 }

prtOutputPageCollated OBJECT-TYPE
    SYNTAX     PresentOnOff
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object indicates that the output sub-unit supports page
        collation, and if so, whether the feature is enabled.  See RFC
        3805 Appendix A, Glossary Of Terms, for definition of how this
        document defines collation.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtOutputEntry 23 }

prtOutputOffsetStacking OBJECT-TYPE
    SYNTAX     PresentOnOff
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object indicates that the output supports offset
        stacking,and if so, whether the feature is enabled.  See RFC
        3805 Appendix A, Glossary Of Terms,  for how Offset Stacking is
        defined by this document.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtOutputEntry 24 }

-- The Marker Group
--
-- A marker is the mechanism that produces marks on the print
-- media.  The marker sub-units and their associated supplies are
-- represented by the Marker Group in the model.  A printer can
-- contain one or more marking mechanisms.  Some examples of
-- multiple marker sub-units are: a printer
-- with separate markers for normal and magnetic ink or an
-- imagesetter that can output to both a proofing device and
-- final film.  Each marking device can have its own set of
-- characteristics associated with it, such as marking technology
-- and resolution.



Bergman, et al.             Standards Track                    [Page 98]

RFC 3805                     Printer MIB v2                    June 2004


prtMarker OBJECT IDENTIFIER ::= { printmib 10 }

-- The printable area margins as listed below define an area of
-- the print media which is guaranteed to be printable for all
-- combinations of input, media paths, and interpreters for this
-- marker.

prtMarkerTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF PrtMarkerEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The marker table provides a description of each marker
        sub-unit contained within the printer.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMarker 2 }

prtMarkerEntry OBJECT-TYPE
    SYNTAX     PrtMarkerEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "Entries in this table define the characteristics and status
        of each marker sub-unit in the printer.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    INDEX  { hrDeviceIndex, prtMarkerIndex }
    ::= { prtMarkerTable 1 }

PrtMarkerEntry ::= SEQUENCE {
    prtMarkerIndex                  Integer32,
    prtMarkerMarkTech               PrtMarkerMarkTechTC,
    prtMarkerCounterUnit            PrtMarkerCounterUnitTC,
    prtMarkerLifeCount              Counter32,
    prtMarkerPowerOnCount           Counter32,
    prtMarkerProcessColorants       Integer32,
    prtMarkerSpotColorants          Integer32,
    prtMarkerAddressabilityUnit     PrtMarkerAddressabilityUnitTC,
    prtMarkerAddressabilityFeedDir  Integer32,
    prtMarkerAddressabilityXFeedDir Integer32,
    prtMarkerNorthMargin            Integer32,
    prtMarkerSouthMargin            Integer32,
    prtMarkerWestMargin             Integer32,
    prtMarkerEastMargin             Integer32,
    prtMarkerStatus                 PrtSubUnitStatusTC



Bergman, et al.             Standards Track                    [Page 99]

RFC 3805                     Printer MIB v2                    June 2004


    }

prtMarkerIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A unique value used by the printer to identify this marking
        SubUnit.  Although these values may change due to a major
        reconfiguration of the device (e.g., the addition of new marking
        sub-units to the printer), values SHOULD remain stable across
        successive printer power cycles.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMarkerEntry 1 }

prtMarkerMarkTech OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtMarkerMarkTechTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The type of marking technology used for this marking
        sub-unit."
    ::= { prtMarkerEntry 2 }

prtMarkerCounterUnit OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtMarkerCounterUnitTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The unit that will be used by the printer when reporting
        counter values for this marking sub-unit.  The time units of
        measure are provided for a device like a strip recorder that
        does not or cannot track the physical dimensions of the media
        and does not use characters, lines or sheets."
    ::= { prtMarkerEntry 3 }

prtMarkerLifeCount OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The count of the number of units of measure counted during the



Bergman, et al.             Standards Track                   [Page 100]

RFC 3805                     Printer MIB v2                    June 2004


        life of printer using units of measure as specified by
        prtMarkerCounterUnit.

        Note: This object should be implemented as a persistent object
        with a reliable value throughout the lifetime of the printer."
    ::= { prtMarkerEntry 4 }

prtMarkerPowerOnCount OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The count of the number of units of measure counted since the
        equipment was most recently powered on using units of measure
        as specified by prtMarkerCounterUnit."
    ::= { prtMarkerEntry 5 }

prtMarkerProcessColorants OBJECT-TYPE
    SYNTAX     Integer32 (0..65535)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of process colors supported by this marker.  A
        process color of 1 implies monochrome.  The value of this
        object and prtMarkerSpotColorants cannot both be 0.  The value
        of prtMarkerProcessColorants must be 0 or greater.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMarkerEntry 6 }

prtMarkerSpotColorants OBJECT-TYPE
    SYNTAX     Integer32 (0..65535)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of spot colors supported by this marker.  The value
        of this object and prtMarkerProcessColorants cannot both be 0.
        Must be 0 or greater.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMarkerEntry 7 }

prtMarkerAddressabilityUnit OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtMarkerAddressabilityUnitTC



Bergman, et al.             Standards Track                   [Page 101]

RFC 3805                     Printer MIB v2                    June 2004


    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The unit of measure of distances, as applied to the marker's
        resolution.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMarkerEntry 8 }

prtMarkerAddressabilityFeedDir OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The maximum number of addressable marking positions in the
        feed direction per 10000 units of measure specified by
        prtMarkerAddressabilityUnit.  A value of (-1) implies 'other'
        or 'infinite' while a value of (-2) implies 'unknown'.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMarkerEntry 9 }

prtMarkerAddressabilityXFeedDir OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The maximum number of addressable marking positions in the
        cross feed direction in 10000 units of measure specified by
        prtMarkerAddressabilityUnit.  A value of (-1) implies 'other'
        or 'infinite' while a value of (-2) implies 'unknown'.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMarkerEntry 10 }

prtMarkerNorthMargin OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The margin, in units identified by prtMarkerAddressabilityUnit,
        from the leading edge of the medium as the medium flows through



Bergman, et al.             Standards Track                   [Page 102]

RFC 3805                     Printer MIB v2                    June 2004


        the marking engine with the side to be imaged facing the
        observer.  The leading edge is the North edge and the other
        edges are defined by the normal compass layout of  directions
        with the compass facing the observer.  Printing within the area
        bounded by all four margins is guaranteed for all interpreters.
        The value (-2) means unknown."
    ::= { prtMarkerEntry 11 }

prtMarkerSouthMargin OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The margin from the South edge  (see prtMarkerNorthMargin) of
        the medium in units identified by prtMarkerAddressabilityUnit.
        Printing within the area bounded by all four margins  is
        guaranteed for all interpreters.  The value (-2) means unknown."
    ::= { prtMarkerEntry 12 }

prtMarkerWestMargin OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The margin from the West edge (see prtMarkerNorthMargin) of
        the medium in units identified by prtMarkerAddressabilityUnit.
        Printing within the area bounded by all four margins is
        guaranteed for all interpreters.  The value (-2) means unknown."
    ::= { prtMarkerEntry 13 }

prtMarkerEastMargin OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The margin from the East edge (see prtMarkerNorthMargin) of
        the medium in units identified by prtMarkerAddressabilityUnit.
        Printing within the area bounded by all four margins is
        guaranteed for all interpreters.  The value (-2) means unknown."
    ::= { prtMarkerEntry 14 }

prtMarkerStatus OBJECT-TYPE
    SYNTAX     PrtSubUnitStatusTC
    MAX-ACCESS read-only
    STATUS     current



Bergman, et al.             Standards Track                   [Page 103]

RFC 3805                     Printer MIB v2                    June 2004


    DESCRIPTION
        "The current status of this marker sub-unit."
    ::= { prtMarkerEntry 15 }

-- The Marker Supplies Group

prtMarkerSupplies OBJECT IDENTIFIER ::= { printmib 11 }

prtMarkerSuppliesTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF PrtMarkerSuppliesEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A table of the marker supplies available on this printer."
    ::= { prtMarkerSupplies 1 }

prtMarkerSuppliesEntry OBJECT-TYPE
    SYNTAX     PrtMarkerSuppliesEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "Attributes of a marker supply.  Entries may exist in the table
        for each device index with a device type of 'printer'.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    INDEX  { hrDeviceIndex, prtMarkerSuppliesIndex }
    ::= { prtMarkerSuppliesTable 1 }
PrtMarkerSuppliesEntry ::= SEQUENCE {
    prtMarkerSuppliesIndex          Integer32,
    prtMarkerSuppliesMarkerIndex    Integer32,
    prtMarkerSuppliesColorantIndex  Integer32,
    prtMarkerSuppliesClass          PrtMarkerSuppliesClassTC,
    prtMarkerSuppliesType           PrtMarkerSuppliesTypeTC,
    prtMarkerSuppliesDescription    PrtLocalizedDescriptionStringTC,
    prtMarkerSuppliesSupplyUnit     PrtMarkerSuppliesSupplyUnitTC,
    prtMarkerSuppliesMaxCapacity    Integer32,
    prtMarkerSuppliesLevel          Integer32
    }

prtMarkerSuppliesIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A unique value used by the printer to identify this marker
        supply.  Although these values may change due to a major
        reconfiguration of the device (e.g., the addition of new marker



Bergman, et al.             Standards Track                   [Page 104]

RFC 3805                     Printer MIB v2                    June 2004


        supplies to the printer), values SHOULD remain stable across
        successive printer power cycles.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMarkerSuppliesEntry 1 }

prtMarkerSuppliesMarkerIndex OBJECT-TYPE
    SYNTAX     Integer32 (0..65535)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The value of prtMarkerIndex corresponding to the marking sub
        unit with which this marker supply sub-unit is associated."
    ::= { prtMarkerSuppliesEntry 2 }

prtMarkerSuppliesColorantIndex OBJECT-TYPE
    SYNTAX     Integer32 (0..65535)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The value of prtMarkerColorantIndex corresponding to the
        colorant with which this marker supply sub-unit is associated.
        This value shall be 0 if there is no colorant table or if this
        supply does not depend on a single specified colorant.
        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMarkerSuppliesEntry 3 }

prtMarkerSuppliesClass OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtMarkerSuppliesClassTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "Indicates whether this supply entity represents a supply that
        is consumed or a receptacle that is filled.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMarkerSuppliesEntry 4 }

prtMarkerSuppliesType OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtMarkerSuppliesTypeTC
    MAX-ACCESS read-only



Bergman, et al.             Standards Track                   [Page 105]

RFC 3805                     Printer MIB v2                    June 2004


    STATUS     current
    DESCRIPTION
        "The type of this supply."
    ::= { prtMarkerSuppliesEntry 5 }

prtMarkerSuppliesDescription OBJECT-TYPE
    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
    -- to a TC to better support localization of the object.
    SYNTAX     PrtLocalizedDescriptionStringTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The description of this supply container/receptacle in the
        localization specified by prtGeneralCurrentLocalization."
    ::= { prtMarkerSuppliesEntry 6 }

prtMarkerSuppliesSupplyUnit OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtMarkerSuppliesSupplyUnitTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "Unit of measure of this marker supply container/receptacle.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMarkerSuppliesEntry 7 }

prtMarkerSuppliesMaxCapacity OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The maximum capacity of this supply container/receptacle
        expressed in prtMarkerSuppliesSupplyUnit.  If this supply
        container/receptacle can reliably sense this value, the value
        is reported by the printer and is read-only; otherwise, the
        value may be written (by a Remote Control Panel or a Management
        Application).  The value (-1) means other and specifically
        indicates that the sub-unit places no restrictions on this
        parameter.  The value (-2) means unknown."
    ::= { prtMarkerSuppliesEntry 8 }

prtMarkerSuppliesLevel OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-3..2147483647)



Bergman, et al.             Standards Track                   [Page 106]

RFC 3805                     Printer MIB v2                    June 2004


    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The current level if this supply is a container; the remaining
        space if this supply is a receptacle.  If this supply
        container/receptacle can reliably sense this value, the value
        is reported by the printer and is read-only; otherwise, the
        value may be written (by a Remote Control Panel or a Management
        Application).  The value (-1) means other and specifically
        indicates that the sub-unit places no restrictions on this
        parameter.  The value (-2) means unknown.  A value of (-3) means
        that the printer knows that there is some supply/remaining
        space, respectively."
    ::= { prtMarkerSuppliesEntry 9 }

-- The Marker Colorant Group

prtMarkerColorant OBJECT IDENTIFIER ::= { printmib 12 }

prtMarkerColorantTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF PrtMarkerColorantEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A table of all of the colorants available on the printer."
    ::= { prtMarkerColorant 1 }

prtMarkerColorantEntry OBJECT-TYPE
    SYNTAX     PrtMarkerColorantEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "Attributes of a colorant available on the printer.  Entries may
        exist in the table for each device index with a device type of
        'printer'.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    INDEX { hrDeviceIndex, prtMarkerColorantIndex }
    ::= { prtMarkerColorantTable 1 }

PrtMarkerColorantEntry ::= SEQUENCE {
    prtMarkerColorantIndex          Integer32,
    prtMarkerColorantMarkerIndex    Integer32,
    prtMarkerColorantRole           PrtMarkerColorantRoleTC,
    prtMarkerColorantValue          OCTET STRING,
    prtMarkerColorantTonality       Integer32
    }



Bergman, et al.             Standards Track                   [Page 107]

RFC 3805                     Printer MIB v2                    June 2004


prtMarkerColorantIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A unique value used by the printer to identify this colorant.
        Although these values may change due to a major reconfiguration
        of the device (e.g., the addition of new colorants to the
        printer) , values SHOULD remain stable across successive
        printer power cycles.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMarkerColorantEntry 1 }

prtMarkerColorantMarkerIndex OBJECT-TYPE
    SYNTAX     Integer32 (0..65535)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The value of prtMarkerIndex corresponding to the marker sub
        unit with which this colorant entry is associated."
    ::= { prtMarkerColorantEntry 2 }

prtMarkerColorantRole OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtMarkerColorantRoleTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The role played by this colorant."
    ::= { prtMarkerColorantEntry 3 }

prtMarkerColorantValue OBJECT-TYPE
    -- NOTE: The string length range has been increased from RFC 1759.
    SYNTAX     OCTET STRING (SIZE(0..255))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The name of the color of this colorant using standardized
        string names from ISO 10175 (DPA) and ISO 10180 (SPDL) such as:
            other
            unknown
            white
            red
            green
            blue



Bergman, et al.             Standards Track                   [Page 108]

RFC 3805                     Printer MIB v2                    June 2004


            cyan
            magenta
            yellow
            black
        Implementers may add additional string values.  The naming
        conventions in ISO 9070 are recommended in order to avoid
        potential name clashes"
    ::= { prtMarkerColorantEntry 4 }

prtMarkerColorantTonality OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (2..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The distinct levels of tonality realizable by a marking sub
        unit when using this colorant.  This value does not include the
        number of levels of tonal difference that an interpreter can
        obtain by techniques such as half toning.  This value must be at
        least 2."
    ::= { prtMarkerColorantEntry 5 }

-- The Media Path Group
--
-- The media paths encompass the mechanisms in the printer that
-- move the media through the printer and connect all other media
-- related sub-units: inputs, outputs, markers and finishers.  A
-- printer contains one or more media paths.  These are
-- represented by the Media Path Group in the model.

prtMediaPath OBJECT IDENTIFIER ::= { printmib 13 }

prtMediaPathTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF PrtMediaPathEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The media path table includes both physical and logical paths
        within the printer.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMediaPath 4 }

prtMediaPathEntry OBJECT-TYPE
    SYNTAX     PrtMediaPathEntry
    MAX-ACCESS not-accessible
    STATUS     current



Bergman, et al.             Standards Track                   [Page 109]

RFC 3805                     Printer MIB v2                    June 2004


    DESCRIPTION
        "Entries may exist in the table for each device index with a
        device type of 'printer'  Each entry defines the physical
        characteristics of and the status of the media path.  The data
        provided indicates the maximum throughput and the media
        size limitations of these subunits.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    INDEX  { hrDeviceIndex, prtMediaPathIndex }
    ::= { prtMediaPathTable 1 }

PrtMediaPathEntry ::= SEQUENCE {
    prtMediaPathIndex               Integer32,
    prtMediaPathMaxSpeedPrintUnit   PrtMediaPathMaxSpeedPrintUnitTC,
    prtMediaPathMediaSizeUnit       PrtMediaUnitTC,
    prtMediaPathMaxSpeed            Integer32,
    prtMediaPathMaxMediaFeedDir     Integer32,
    prtMediaPathMaxMediaXFeedDir    Integer32,
    prtMediaPathMinMediaFeedDir     Integer32,
    prtMediaPathMinMediaXFeedDir    Integer32,
    prtMediaPathType                PrtMediaPathTypeTC,
    prtMediaPathDescription         PrtLocalizedDescriptionStringTC,
    prtMediaPathStatus              PrtSubUnitStatusTC
    }

prtMediaPathIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A unique value used by the printer to identify this media
        path.  Although these values may change due to a major
        reconfiguration of the device (e.g., the addition of new media
        paths to the printer), values SHOULD remain stable across
        successive printer power cycles.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMediaPathEntry 1 }

prtMediaPathMaxSpeedPrintUnit OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX PrtMediaPathMaxSpeedPrintUnitTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION



Bergman, et al.             Standards Track                   [Page 110]

RFC 3805                     Printer MIB v2                    June 2004


        "The unit of measure used in specifying the speed of all media
        paths in the printer."
    ::= { prtMediaPathEntry 2 }

prtMediaPathMediaSizeUnit OBJECT-TYPE
    SYNTAX     PrtMediaUnitTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The units of measure of media size for use in calculating and
        relaying dimensional values for all media paths in the
        printer."
    ::= { prtMediaPathEntry 3 }

prtMediaPathMaxSpeed OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The maximum printing speed of this media path expressed in
        prtMediaPathMaxSpeedUnit's.  A value of (-1) implies 'other'."
    ::= { prtMediaPathEntry 4 }

prtMediaPathMaxMediaFeedDir OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The maximum physical media size in the feed direction of this
        media path expressed in units of measure specified by
        PrtMediaPathMediaSizeUnit.  A value of (-1) implies 'unlimited'
        a value of (-2) implies 'unknown'.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMediaPathEntry 5 }

prtMediaPathMaxMediaXFeedDir OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The maximum physical media size across the feed direction of
        this media path expressed in units of measure specified by
        prtMediaPathMediaSizeUnit.  A value of (-2) implies 'unknown'.



Bergman, et al.             Standards Track                   [Page 111]

RFC 3805                     Printer MIB v2                    June 2004


        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMediaPathEntry 6 }

prtMediaPathMinMediaFeedDir OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The minimum physical media size in the feed direction of this
        media path expressed in units of measure specified by
        prtMediaPathMediaSizeUnit.  A value of (-2) implies 'unknown'.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMediaPathEntry 7 }

prtMediaPathMinMediaXFeedDir OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The minimum physical media size across the feed direction of
        this media path expressed in units of measure specified by
        prtMediaPathMediaSizeUnit.  A value of (-2) implies 'unknown'.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtMediaPathEntry 8 }

prtMediaPathType OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtMediaPathTypeTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The type of the media path for this media path."
    ::= { prtMediaPathEntry 9 }

prtMediaPathDescription OBJECT-TYPE
    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
    -- to a TC to better support localization of the object.
    SYNTAX     PrtLocalizedDescriptionStringTC
    MAX-ACCESS read-only
    STATUS     current



Bergman, et al.             Standards Track                   [Page 112]

RFC 3805                     Printer MIB v2                    June 2004


    DESCRIPTION
        "The manufacturer-provided description of this media path in
        the localization specified by prtGeneralCurrentLocalization."
    ::= { prtMediaPathEntry 10 }

prtMediaPathStatus OBJECT-TYPE
    SYNTAX     PrtSubUnitStatusTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "The current status of this media path."
    ::= { prtMediaPathEntry 11 }

-- The Print Job Delivery Channel Group
--
-- Print Job Delivery Channels are independent sources of print
-- data.  Here, print data is the term used for the information
-- that is used to construct printed pages and may have both data
-- and control aspects.  The output of a channel is in a form
-- suitable for input to one of the interpreters as a
-- stream.  A channel may be independently enabled (allowing
-- print data to flow) or disabled (stopping the flow of
-- print data).  A printer may have one or more channels.
--
-- The Print Job Delivery Channel table describes the
-- capabilities of the printer and not what is currently being
-- performed by the printer
--
-- Basically, the print job delivery channel abstraction
-- describes the final processing step of getting the print data
-- to an interpreter.  It might include some level of
-- decompression or decoding of print stream data.
-- channel.  All of these aspects are hidden in the channel
-- abstraction.
--
-- There are many kinds of print job delivery channels; some of
-- which are based on networks and others which are not.  For
-- example, a channel can be a serial (or parallel) connection;
-- it can be a service, such as the UNIX Line Printer Daemon
-- (LPD), offering services over a network connection; or
-- it could be a disk drive into which a floppy disk with
-- the print data is inserted.  Each print job delivery channel is
-- identified by the electronic path and/or service protocol
-- used to deliver print data to a print data interpreter.
--
-- Channel example                   Implementation
--
-- serial port channel            bi-directional data channel



Bergman, et al.             Standards Track                   [Page 113]

RFC 3805                     Printer MIB v2                    June 2004


-- parallel port channel          often uni-directional channel
-- IEEE 1284 port channel         bi-directional channel
-- SCSI port channel              bi-directional
-- Apple PAP channel              may be based on LocalTalk,
--                                Ethernet or Tokentalk
-- LPD Server channel             TCP/IP based, port 515
-- Netware Remote Printer         SPX/IPX based channel
-- Netware Print Server           SPX/IPX based channel
--
-- It is easy to note that this is a mixed bag.  There are
-- some physical connections over which no (or very meager)
-- protocols are run (e.g., the serial or old parallel ports)
-- and there are services which often have elaborate
-- protocols that run over a number of protocol stacks.  In
-- the end, what is important is the delivery of print data
-- through the channel.
--
-- The print job delivery channel sub-units are represented by
-- the Print Job Delivery Channel Group in the Model.  It has a
-- current print job control language, which can be used to
-- specify which interpreter is to be used for the print data and
-- to query and change environment variables used by the
-- interpreters (and Management Applications).  There is also a
-- default interpreter that is to be used if an interpreter is
-- not explicitly specified using the Control Language.

-- The first seven items in the Print Job Delivery Channel Table
-- define the "channel" itself.  A channel typically depends on
-- other protocols and interfaces to provide the data that flows
-- through the channel.
--
-- Control of a print job delivery channel is largely limited to
-- enabling or disabling the entire channel itself.  It is likely
-- that more control of the process of accessing print data
-- will be needed over time.  Thus, the ChannelType will
-- allow type-specific data to be associated with each
-- channel (using ChannelType specific groups in a fashion
-- analogous to the media specific MIBs that are associated
-- with the IANAIfType in the Interfaces Table).  As a first
-- step in this direction, each channel will identify the
-- underlying Interface on which it is based.  This is the
-- eighth object in each row of the table.









Bergman, et al.             Standards Track                   [Page 114]

RFC 3805                     Printer MIB v2                    June 2004


-- The Print Job Delivery Channel Table

prtChannel OBJECT IDENTIFIER ::= { printmib 14 }

prtChannelTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF PrtChannelEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The channel table represents the set of input data sources
        which can provide print data to one or more of the
        interpreters available on a printer.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtChannel 1 }

prtChannelEntry OBJECT-TYPE
    SYNTAX     PrtChannelEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "Entries may exist in the table for each device index with a
        device type of 'printer'.  Each channel table entry is
        characterized by a unique protocol stack and/or addressing.
        The channel may also have printer dependent features that are
        associated with a printing language.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    INDEX  { hrDeviceIndex, prtChannelIndex }
    ::= { prtChannelTable 1 }

PrtChannelEntry ::= SEQUENCE {
    prtChannelIndex                     Integer32,
    prtChannelType                      PrtChannelTypeTC,
    prtChannelProtocolVersion           OCTET STRING,
    prtChannelCurrentJobCntlLangIndex   Integer32,
    prtChannelDefaultPageDescLangIndex  Integer32,
    prtChannelState                     PrtChannelStateTC,
    prtChannelIfIndex                   InterfaceIndexOrZero,
    prtChannelStatus                    PrtSubUnitStatusTC,
    prtChannelInformation               OCTET STRING
    }

prtChannelIndex OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (1..65535)



Bergman, et al.             Standards Track                   [Page 115]

RFC 3805                     Printer MIB v2                    June 2004


    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A unique value used by the printer to identify this data
        channel.  Although these values may change due to a major
        reconfiguration of the device (e.g., the addition of new data
        channels to the printer), values SHOULD remain stable across
        successive printer power cycles.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtChannelEntry 1 }

prtChannelType OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtChannelTypeTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The type of this print data channel.  This object provides the
        linkage to ChannelType-specific groups that may (conceptually)
        extend the prtChannelTable with additional details about that
        channel."
    ::= { prtChannelEntry 2 }

prtChannelProtocolVersion OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..63))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The version of the protocol used on this channel.  The format
        used for version numbering depends on prtChannelType."
    ::= { prtChannelEntry 3 }

prtChannelCurrentJobCntlLangIndex OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (0..65535)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of prtInterpreterIndex corresponding to the Control
        Language Interpreter for this channel.  This interpreter defines
        the syntax used for control functions, such as querying or
        changing environment variables and identifying job boundaries
        (e.g., PJL, PostScript, NPAP).  A value of zero indicates that
        there is no current Job Control Language Interpreter for this
        channel.



Bergman, et al.             Standards Track                   [Page 116]

RFC 3805                     Printer MIB v2                    June 2004


        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtChannelEntry 4 }

prtChannelDefaultPageDescLangIndex OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (0..65535)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of prtInterpreterIndex corresponding to the Page
        Description Language Interpreter for this channel.  This
        interpreter defines the default Page Description Language
        interpreter to be used for the print data unless the Control
        Language is used to select a specific interpreter (e.g., PCL,
        PostScript Language, auto-sense).  A value of zero indicates
        that there is no default page description language interpreter
        for this channel.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtChannelEntry 5 }

prtChannelState OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtChannelStateTC
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The state of this print data channel.  The value determines
        whether control information and print data is allowed through
        this channel or not."
    ::= { prtChannelEntry 6 }

prtChannelIfIndex OBJECT-TYPE
    SYNTAX     InterfaceIndexOrZero   -- Was Integer32 in RFC 1759.
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of ifIndex in the ifTable; see the Interfaces Group
        MIB [RFC2863] which corresponds to this channel.
        When more than one row of the ifTable is relevant, this is the
        index of the row representing the topmost layer in the
        interface hierarchy.  A value of zero indicates that no
        interface is associated with this channel.

        NOTE: The above description has been modified from RFC 1759



Bergman, et al.             Standards Track                   [Page 117]

RFC 3805                     Printer MIB v2                    June 2004


        for clarification."
    ::= { prtChannelEntry 7 }

prtChannelStatus OBJECT-TYPE
    SYNTAX     PrtSubUnitStatusTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The current status of the channel."
    ::= { prtChannelEntry 8 }

prtChannelInformation OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "Auxiliary information to allow a printing application to use
        the channel for data submission to the printer.  An application
        capable of using a specific PrtChannelType should be able to
        use the combined information from the prtChannelInformation and
        other channel and interface group objects to 'bootstrap' its
        use of the channel.  prtChannelInformation is not intended to
        provide a general channel description, nor to provide
        information that is available once the channel is in use.

        The encoding and interpretation of the prtChannelInformation
        object is specific to channel type.  The description of each
        PrtChannelType enum value for which prtChannelInformation is
        defined specifies the appropriate encoding and interpretation,
        including interaction with other objects.  For channel types
        that do not specify a prtChannelInformation value, its value
        shall be null (0 length).

        When a new PrtChannelType enumeration value is registered, its
        accompanying description must specify the encoding and
        interpretation of the prtChannelInformation value for the
        channel type.  prtChannelInformation semantics for an existing
        PrtChannelType may be added or amended in the same manner as
        described in section 2.4.1 for type 2 enumeration values.

        The prtChannelInformation specifies values for a collection of
        channel attributes, represented as text according to the
        following rules:

        1. The prtChannelInformation is not affected by localization.

        2. The prtChannelInformation is a list of entries representing
        the attribute values.  Each entry consists of the following



Bergman, et al.             Standards Track                   [Page 118]

RFC 3805                     Printer MIB v2                    June 2004


        items, in order:

        a. A keyword, composed of alphabetic characters (A-Z, a-z)
        represented by their NVT ASCII [RFC854] codes, that
        identifies a channel attribute,

        b. The NVT ASCII code for an Equals Sign (=) (code 61) to
        delimit the keyword,

        c. A data value encoded using rules specific to the
        PrtChannelType to with the prtChannelInformation applies which
        must in no case allow an octet with value 10 (the NVT ASCII
        Line Feed code),

        d. the NVT ASCII code for a Line Feed character (code 10) to
        delimit the data value.

        No other octets shall be present.

        Keywords are case-sensitive.  Conventionally, keywords are
        capitalized (including each word of a multi-word keyword) and
        since they occupy space in the prtChannelInformation, they are
        kept short.

        3. If a channel attribute has multiple values, it is
        represented by multiple entries with the same keyword, each
        specifying one value. Otherwise, there shall be at most one
        entry for each attribute.

        4. By default, entries may appear in any order.  If there are
        ordering constraints for particular entries, these must be
        specified in their definitions.

        5. The prtChannelInformation value by default consists of text
        represented by NVT ASCII graphics character codes.  However,
        other representations may be specified:

        a. In cases where the prtChannelInformation value contains
        information not normally coded in textual form, whatever
        symbolic representation is conventionally used for the
        information should be used for encoding the
        prtChannelInformation value.  (For instance, a binary port value
        might be represented as a decimal number using NVT ASCII
        codes.)  Such encoding must be specified in the definition of
        the value.

        b. The value may contain textual information in a character set
        other than NVT ASCII graphics characters.  (For instance, an



Bergman, et al.             Standards Track                   [Page 119]

RFC 3805                     Printer MIB v2                    June 2004


        identifier might consist of ISO 10646 text encoded using the
        UTF-8 encoding scheme.)  Such a character set and its encoding
        must be specified in the definition of the value.

        6. For each PrtChannelType for which prtChannelInformation
        entries are defined, the descriptive text associated with the
        PrtChannelType enumeration value shall specify the following
        information for each entry:

        Title:        Brief description phrase, e.g.: 'Port name',
                      'Service Name', etc.

        Keyword:      The keyword value, e.g.: 'Port' or 'Service'

        Syntax:       The encoding of the entry value if it cannot be
                      directly represented by NVT ASCII.

        Status:       'Mandatory', 'Optional', or 'Conditionally
                      Mandatory'

        Multiplicity: 'Single' or 'Multiple' to indicate whether the
                      entry may be present multiple times.

        Description:  Description of the use of the entry, other
                      information required to complete the definition
                      (e.g.: ordering constraints, interactions between
                      entries).

        Applications that interpret prtChannelInformation should ignore
        unrecognized entries, so they are not affected if new entry
        types are added."

     ::= { prtChannelEntry 9 }

-- The Interpreter Group
--
-- The interpreter sub-units are responsible for the conversion
-- of a description of intended print instances into images that
-- are to be marked on the media.  A printer may have one or more
-- interpreters.  The interpreter sub-units are represented by the
-- Interpreter Group in the Model.  Each interpreter is generally
-- implemented with software running on the System Controller
-- sub-unit.  The Interpreter Table has one entry per interpreter
-- where the interpreters include both Page Description Language
-- (PDL) Interpreters and Control Language Interpreters.

prtInterpreter OBJECT IDENTIFIER ::= { printmib 15 }




Bergman, et al.             Standards Track                   [Page 120]

RFC 3805                     Printer MIB v2                    June 2004


--       Interpreter Table

prtInterpreterTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF PrtInterpreterEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The interpreter table is a table representing the
        interpreters in the printer.  An entry shall be placed in the
        interpreter table for each interpreter on the printer.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtInterpreter 1 }

prtInterpreterEntry OBJECT-TYPE
    SYNTAX     PrtInterpreterEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "Entries may exist in the table for each device index with a
        device type of 'printer'.  Each table entry provides a complete
        description of the interpreter, including version information,
        rendering resolutions, default character sets, output
        orientation, and communication capabilities.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    INDEX  { hrDeviceIndex, prtInterpreterIndex }
    ::= { prtInterpreterTable 1 }

PrtInterpreterEntry ::= SEQUENCE {
    prtInterpreterIndex                 Integer32,
    prtInterpreterLangFamily            PrtInterpreterLangFamilyTC,
    prtInterpreterLangLevel             OCTET STRING,
    prtInterpreterLangVersion           OCTET STRING,
    prtInterpreterDescription           PrtLocalizedDescriptionStringTC,
    prtInterpreterVersion               OCTET STRING,
    prtInterpreterDefaultOrientation    PrtPrintOrientationTC,
    prtInterpreterFeedAddressability    Integer32,
    prtInterpreterXFeedAddressability   Integer32,
    prtInterpreterDefaultCharSetIn      IANACharset,
    prtInterpreterDefaultCharSetOut     IANACharset,
    prtInterpreterTwoWay                PrtInterpreterTwoWayTC
    }

prtInterpreterIndex OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.



Bergman, et al.             Standards Track                   [Page 121]

RFC 3805                     Printer MIB v2                    June 2004


    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A unique value for each PDL or control language for which
        there exists an interpreter or emulator in the printer.  The
        value is used to identify this interpreter.  Although these
        values may change due to a major reconfiguration of the device
        (e.g., the addition of new interpreters to the printer), values
        SHOULD remain stable across successive printer power cycles.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtInterpreterEntry 1 }

prtInterpreterLangFamily OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtInterpreterLangFamilyTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The family name of a Page Description Language (PDL) or
        control language which this interpreter in the printer can
        interpret or emulate.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtInterpreterEntry 2 }

prtInterpreterLangLevel OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..31))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The level of the language which this interpreter is
        interpreting or emulating.  This might contain a value like
        '5e'for an interpreter which is emulating level 5e of the PCL
        language.  It might contain '2' for an interpreter which is
        emulating level 2 of the PostScript language.  Similarly it
        might contain '2' for an interpreter which is emulating level 2
        of the HPGL language."
    ::= { prtInterpreterEntry 3 }

prtInterpreterLangVersion OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..31))
    MAX-ACCESS read-only
    STATUS     current



Bergman, et al.             Standards Track                   [Page 122]

RFC 3805                     Printer MIB v2                    June 2004


    DESCRIPTION
        "The date code or version of the language which this
        interpreter is interpreting or emulating."
    ::= { prtInterpreterEntry 4 }

prtInterpreterDescription OBJECT-TYPE
    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
    -- to a TC to better support localization of the object.
    SYNTAX     PrtLocalizedDescriptionStringTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A string to identify this interpreter in the localization
        specified by prtGeneralCurrentLocalization as opposed to the
        language which is being interpreted.  It is anticipated that
        this string will allow manufacturers to unambiguously identify
        their interpreters."
    ::= { prtInterpreterEntry 5 }

prtInterpreterVersion OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..31))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The date code, version number, or other product specific
        information tied to this interpreter.  This value is associated
        with the interpreter, rather than with the version of the
        language which is being interpreted or emulated."
    ::= { prtInterpreterEntry 6 }

prtInterpreterDefaultOrientation OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtPrintOrientationTC
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The current orientation default for this interpreter.  This
        value may be overridden for a particular job (e.g., by a
        command in the input data stream)."
    ::= { prtInterpreterEntry 7 }

prtInterpreterFeedAddressability OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION



Bergman, et al.             Standards Track                   [Page 123]

RFC 3805                     Printer MIB v2                    June 2004


        "The maximum interpreter addressability in the feed
        direction in 10000 prtMarkerAddressabilityUnits (as specified
        by prtMarkerDefaultIndex) for this interpreter.  The
        value (-1) means other and specifically indicates that the
        sub-unit places no restrictions on this parameter.  The value
        (-2) means unknown.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtInterpreterEntry 8 }

prtInterpreterXFeedAddressability OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The maximum interpreter addressability in the cross feed
        direction in 10000 prtMarkerAddressabilityUnits (as specified
        by prtMarkerDefaultIndex) for this interpreter.  The
        value (-1) means other and specifically indicates that the
        sub-unit places no restrictions on this parameter.  The value
        (-2) means unknown.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtInterpreterEntry 9 }

prtInterpreterDefaultCharSetIn OBJECT-TYPE
    SYNTAX     IANACharset
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The default coded character set for input octets encountered
        outside a context in which the Page Description Language
        established the interpretation of the octets.  (Input octets are
        presented to the interpreter through a path defined in the
        channel group.)"
     ::= { prtInterpreterEntry 10 }

prtInterpreterDefaultCharSetOut OBJECT-TYPE
    SYNTAX     IANACharset
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The default character set for data coming from this
        interpreter through the printer's output channel (i.e. the
        'backchannel')."



Bergman, et al.             Standards Track                   [Page 124]

RFC 3805                     Printer MIB v2                    June 2004


    ::= { prtInterpreterEntry 11 }

prtInterpreterTwoWay OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtInterpreterTwoWayTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "Indicates whether or not this interpreter returns information
        back to the host."
    ::= { prtInterpreterEntry 12 }

-- The Console Group
--
-- Many printers have a console on the printer, the operator
-- console, that is used to display and modify the state of the
-- printer.  The console can be as simple as a few indicators and
-- switches or as complicated as full screen displays and
-- keyboards.  There can be at most one such console.

-- The Display Buffer Table

prtConsoleDisplayBuffer OBJECT IDENTIFIER ::= { printmib 16 }

prtConsoleDisplayBufferTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF PrtConsoleDisplayBufferEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "Physical display buffer for printer console display or
        operator panel

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtConsoleDisplayBuffer 5 }

prtConsoleDisplayBufferEntry OBJECT-TYPE
    SYNTAX     PrtConsoleDisplayBufferEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "This table contains one entry for each physical line on
        the display.  Lines cannot be added or deleted.  Entries may
        exist in the table for each device index with a device type of
        'printer'.

        NOTE: The above description has been modified from RFC 1759



Bergman, et al.             Standards Track                   [Page 125]

RFC 3805                     Printer MIB v2                    June 2004


        for clarification."
    INDEX  { hrDeviceIndex, prtConsoleDisplayBufferIndex }
    ::= { prtConsoleDisplayBufferTable 1 }

PrtConsoleDisplayBufferEntry ::= SEQUENCE {
    prtConsoleDisplayBufferIndex    Integer32,
    prtConsoleDisplayBufferText     PrtConsoleDescriptionStringTC
    }

prtConsoleDisplayBufferIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A unique value for each console line in the printer.  The value
        is used to identify this console line.  Although these values
        may change due to a major reconfiguration of the device (e.g.,
        the addition of new console lines to the printer).  Values
        SHOULD remain stable across successive printer power cycles.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtConsoleDisplayBufferEntry 1 }

prtConsoleDisplayBufferText OBJECT-TYPE
    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
    -- to a TC to better support localization of the object.
    SYNTAX     PrtConsoleDescriptionStringTC
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The content of a line in the logical display buffer of
        the operator's console of the printer.  When a write
        operation occurs, normally a critical message, to one of
        the LineText strings, the agent should make that line
        displayable if a physical display is present.  Writing a zero
        length string clears the line.  It is an implementation-
        specific matter as to whether the agent allows a line to be
        overwritten before it has been cleared.  Printer generated
        strings shall be in the localization specified by
        prtConsoleLocalization.Management Application generated strings
        should be localized by the Management Application."
    ::= { prtConsoleDisplayBufferEntry 2 }

-- The Console Light Table

prtConsoleLights OBJECT IDENTIFIER ::= { printmib 17 }




Bergman, et al.             Standards Track                   [Page 126]

RFC 3805                     Printer MIB v2                    June 2004


prtConsoleLightTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF PrtConsoleLightEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The console light table provides a description and state
        information for each light present on the printer console.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtConsoleLights 6 }

prtConsoleLightEntry OBJECT-TYPE
    SYNTAX     PrtConsoleLightEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "Entries may exist in the table for each device index with a
        device type of 'printer'.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    INDEX  { hrDeviceIndex, prtConsoleLightIndex }
    ::= { prtConsoleLightTable 1 }

PrtConsoleLightEntry ::= SEQUENCE {
    prtConsoleLightIndex            Integer32,
    prtConsoleOnTime                Integer32,
    prtConsoleOffTime               Integer32,
    prtConsoleColor                 PrtConsoleColorTC,
    prtConsoleDescription           PrtConsoleDescriptionStringTC
    }

prtConsoleLightIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)  -- Lower limit invalid in RFC 1759
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A unique value used by the printer to identify this light.
        Although these values may change due to a major
        reconfiguration of the device (e.g., the addition of new lights
        to the printer).  Values SHOULD remain stable across successive
        printer power cycles.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtConsoleLightEntry 1 }




Bergman, et al.             Standards Track                   [Page 127]

RFC 3805                     Printer MIB v2                    June 2004


prtConsoleOnTime OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object, in conjunction with prtConsoleOffTime, defines
        the current status of the light.  If both prtConsoleOnTime and
        prtConsoleOffTime are non-zero, the lamp is blinking and the
        values presented define the on time and off time, respectively,
        in milliseconds.  If prtConsoleOnTime is zero and
        prtConsoleOffTime is non-zero, the lamp is off.  If
        prtConsoleOffTime is zero and prtConsoleOnTime is non-zero, the
        lamp is on.  If both values are zero the lamp is off.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtConsoleLightEntry 2 }

prtConsoleOffTime OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object, in conjunction with prtConsoleOnTime, defines the
        current status of the light.  If both prtConsoleOnTime and
        prtConsoleOffTime are non-zero, the lamp is blinking and the
        values presented define the on time and off time, respectively,
        in milliseconds.  If prtConsoleOnTime is zero and
        prtConsoleOffTime is non-zero, the lamp is off.  If
        prtConsoleOffTime is zero and prtConsoleOnTime is non-zero, the
        lamp is on.  If both values are zero the lamp is off.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtConsoleLightEntry 3 }

prtConsoleColor OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtConsoleColorTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The color of this light."
    ::= { prtConsoleLightEntry 4 }




Bergman, et al.             Standards Track                   [Page 128]

RFC 3805                     Printer MIB v2                    June 2004


prtConsoleDescription OBJECT-TYPE
    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
    -- to a TC to better support localization of the object.
    SYNTAX     PrtConsoleDescriptionStringTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The vendor description or label of this light in the
        localization specified by prtConsoleLocalization."
    ::= { prtConsoleLightEntry 5 }

-- The Alerts Group
--
-- The table contains information on the severity, component,
-- detail location within the component, alert code and
-- description of each critical alert that is currently active
-- within the printer.  See 2.2.13 for a more complete
-- description of the alerts table and its management.
--
-- Each parameter in the Trap PDU is a full OID which itself is
-- indexed by the host resources MIB "hrDeviceIndex" object.  In
-- order for a management station to obtain the correct
-- "hrDeviceIndex" associated with a particular Trap PDU, the
-- "hrDeviceIndex" value can be extracted from the returned OID
-- value in the Trap PDU when the PDU is received by the
-- Management station.

prtAlert OBJECT IDENTIFIER ::= { printmib 18 }

prtAlertTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF PrtAlertEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The prtAlertTable lists all the critical and non-critical
        alerts currently active in the printer.  A critical alert is
        one that stops the printer from printing immediately and
        printing can not continue until the critical alert condition
        is eliminated.  Non-critical alerts are those items that do
        not stop printing but may at some future time.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtAlert 1 }

prtAlertEntry OBJECT-TYPE
    SYNTAX     PrtAlertEntry
    MAX-ACCESS not-accessible



Bergman, et al.             Standards Track                   [Page 129]

RFC 3805                     Printer MIB v2                    June 2004


    STATUS     current
    DESCRIPTION
        "Entries may exist in the table for each device
        index with a device type of 'printer'.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    INDEX  { hrDeviceIndex, prtAlertIndex }
    ::= { prtAlertTable 1 }

PrtAlertEntry ::= SEQUENCE {
    prtAlertIndex               Integer32,
    prtAlertSeverityLevel       PrtAlertSeverityLevelTC,
    prtAlertTrainingLevel       PrtAlertTrainingLevelTC,
    prtAlertGroup               PrtAlertGroupTC,
    prtAlertGroupIndex          Integer32,
    prtAlertLocation            Integer32,
    prtAlertCode                PrtAlertCodeTC,
    prtAlertDescription         PrtLocalizedDescriptionStringTC,
    prtAlertTime                TimeTicks
    }

prtAlertIndex OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.  The MAX-ACCESS has
    --       been changed from not accessible to allow the object to be
    --       included (as originally in RFC 1759) in the trap bindings.

    SYNTAX     Integer32 (1..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The index value used to determine which alerts have been added
        or removed from the alert table.  This is an incrementing
        integer initialized to 1 when the printer is reset.  (i.e., The
        first event placed in the alert table after a reset of the
        printer shall have an index value of 1.)  When the printer adds
        an alert to the table, that alert is assigned the next higher
        integer value from the last item entered into the table.  If
        the index value reaches its maximum value, the next index value
        used must be 1.

        NOTE: The management application will read the alert table when
        a trap or event notification occurs or at a periodic rate and
        then parse the table to determine if any new entries were added
        by comparing the last known index value with the current
        highest index value.  The management application will then
        update its copy of the alert table.  When the printer discovers
        that an alert is no longer active, the printer shall remove the



Bergman, et al.             Standards Track                   [Page 130]

RFC 3805                     Printer MIB v2                    June 2004


        row for that alert from the table and shall reduce the number
        of rows in the table.  The printer may add or delete any number
        of rows from the table at any time.  The management station can
        detect when binary change alerts have been deleted by
        requesting an attribute of each alert, and noting alerts as
        deleted when that retrieval is not possible.  The objects
        'prtAlertCriticalEvents'and 'prtAlertAllEvents' in the
        'prtGeneralTable' reduce the need for management applications
        to scan the 'prtAlertTable'.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtAlertEntry 1 }

prtAlertSeverityLevel OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtAlertSeverityLevelTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The level of severity of this alert table entry.  The printer
        determines the severity level assigned to each entry into the
        table."
    ::= { prtAlertEntry 2 }

prtAlertTrainingLevel OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtAlertTrainingLevelTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "See TEXTUAL-CONVENTION PrtAlertTrainingLevelTC.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtAlertEntry 3 }

prtAlertGroup OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtAlertGroupTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The type of sub-unit within the printer model that this alert
        is related.  Input, output, and markers are examples of printer



Bergman, et al.             Standards Track                   [Page 131]

RFC 3805                     Printer MIB v2                    June 2004


        model groups, i.e., examples of types of sub-units.  Wherever
        possible, these enumerations match the sub-identifier that
        identifies the relevant table in the printmib."
    ::= { prtAlertEntry 4 }

prtAlertGroupIndex OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-1..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The low-order index of the row within the table identified
        by prtAlertGroup that represents the sub-unit of the printer
        that caused this alert, or -1 if not applicable.  The
        combination of the prtAlertGroup and the prtAlertGroupIndex
        defines exactly which printer sub-unit caused the alert; for
        example, Input #3, Output#2, and Marker #1.  Every object in
        this MIB is indexed with hrDeviceIndex and optionally, another
        index variable.  If this other index variable is present in the
        table that generated the alert, it will be used as the value
        for this object.  Otherwise, this value shall be -1.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtAlertEntry 5 }

prtAlertLocation OBJECT-TYPE
    -- NOTE: In RFC 1759, the range was not defined.
    SYNTAX     Integer32 (-2..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The sub-unit location that is defined by the printer
        manufacturer to further refine the location of this alert
        within the designated sub-unit.  The location is used in
        conjunction with the Group and GroupIndex values; for example,
        there is an alert in Input #2 at location number 7.  The value
        (-2) indicates unknown.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtAlertEntry 6 }

prtAlertCode OBJECT-TYPE
    --  NOTE: In RFC 1759, the enumeration values were implicitly
    --  defined by this object.
    SYNTAX     PrtAlertCodeTC
    MAX-ACCESS read-only



Bergman, et al.             Standards Track                   [Page 132]

RFC 3805                     Printer MIB v2                    June 2004


    STATUS     current
    DESCRIPTION
        "See associated TEXTUAL-CONVENTION PrtAlertCodeTC.

        NOTE: The above description has been modified from RFC 1759
        for clarification."
    ::= { prtAlertEntry 7 }

prtAlertDescription OBJECT-TYPE
    -- In RFC 1759, the SYNTAX was OCTET STRING.  This has been changed
    -- to a TC to better support localization of the object.
    SYNTAX     PrtLocalizedDescriptionStringTC
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A description of this alert entry in the localization
        specified by prtGeneralCurrentLocalization.  The description is
        provided by the printer to further elaborate on the enumerated
        alert or provide information in the case where the code is
        classified as 'other' or 'unknown'.  The printer is required to
        return a description string but the string may be a null
        string."
    ::= { prtAlertEntry 8 }

prtAlertTime OBJECT-TYPE
    SYNTAX     TimeTicks
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The value of sysUpTime at the time that this alert was
        generated."
    ::= { prtAlertEntry 9 }

printerV1Alert OBJECT-IDENTITY
    STATUS  current
    DESCRIPTION
        "The value of the enterprise-specific OID in an SNMPv1 trap
        sent signaling a critical event in the prtAlertTable."
    ::= { prtAlert 2 }

printerV2AlertPrefix OBJECT IDENTIFIER ::= { printerV1Alert 0 }

printerV2Alert NOTIFICATION-TYPE
    OBJECTS { prtAlertIndex, prtAlertSeverityLevel, prtAlertGroup,
        prtAlertGroupIndex, prtAlertLocation, prtAlertCode }
    STATUS  current
    DESCRIPTION
        "This trap is sent whenever a critical event is added to the



Bergman, et al.             Standards Track                   [Page 133]

RFC 3805                     Printer MIB v2                    June 2004


        prtAlertTable.

        NOTE: The prtAlertIndex object was redundantly included in the
        bindings of the 'printerV2Alert' notification in RFC 1759, even
        though the value exists in the instance qualifier of all the
        other bindings.  This object has been retained to provide
        compatiblity with existing RFC 1759 implementaions."
    ::= { printerV2AlertPrefix 1 }

-- Note that the SNMPv2 to SNMPv1 translation rules dictate that
-- the preceding structure will result in SNMPv1 traps of the
-- following form:
--
-- printerAlert TRAP-TYPE
--     ENTERPRISE printerV1Alert
--     VARIABLES { prtAlertIndex, prtAlertSeverityLevel,
--                 prtAlertGroup, prtAlertGroupIndex,
--                 prtAlertLocation, prtAlertCode }
--     DESCRIPTION
--        "This trap is sent whenever a critical event is added
--         to the prtAlertTable."
--     ::= 1

-- Conformance Information

prtMIBConformance OBJECT IDENTIFIER ::= { printmib 2 }

-- compliance statements

prtMIBCompliance MODULE-COMPLIANCE

    STATUS  current
    DESCRIPTION
        "The compliance statement for agents that implement the
        printer MIB as defined by RFC 1759."
    MODULE -- this module
    MANDATORY-GROUPS { prtGeneralGroup, prtInputGroup,
                       prtOutputGroup,
                       prtMarkerGroup, prtMediaPathGroup,
                       prtChannelGroup, prtInterpreterGroup,
                       prtConsoleGroup, prtAlertTableGroup }
    OBJECT    prtGeneralReset
    SYNTAX    INTEGER {
                  notResetting(3),
                  resetToNVRAM(5)
                  }
    DESCRIPTION
        "It is conformant to implement just these two states in this



Bergman, et al.             Standards Track                   [Page 134]

RFC 3805                     Printer MIB v2                    June 2004


        object.  Any additional states are optional."

    OBJECT    prtConsoleOnTime
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtConsoleOffTime
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"
    ::= { prtMIBConformance 1 }

prtMIB2Compliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
        "The compliance statement for agents that implement the
        printer MIB V2."
        -- The changes from RFC 1759 fall into 2 categories:
        -- 1. New objects plus existing objects with a MIN-ACCESS of
        --    read-only are included.  Existing objects have been added
        --    to this category due to feedback from implementers and
        --    interoperability testing.  This allows products to be
        --    be designed with a higher degree of SNMP security.
        -- 2. New object groups have been added to include all new
        --    objects in this MIB.  All new object groups are optional.
        -- Any MIB that is compliant with RFC 1759 will also be
        -- compliant with this version of the MIB.
    MODULE -- this module
    MANDATORY-GROUPS { prtGeneralGroup, prtInputGroup,
                       prtOutputGroup,
                       prtMarkerGroup, prtMediaPathGroup,
                       prtChannelGroup, prtInterpreterGroup,
                       prtConsoleGroup, prtAlertTableGroup }
    OBJECT    prtGeneralReset
    SYNTAX    INTEGER {
                  notResetting(3),
                  resetToNVRAM(5)
                  }
    DESCRIPTION
        "It is conformant to implement just these two states in this
        object.  Any additional states are optional."

    OBJECT    prtGeneralCurrentLocalization
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"




Bergman, et al.             Standards Track                   [Page 135]

RFC 3805                     Printer MIB v2                    June 2004


    OBJECT    prtGeneralCurrentOperator
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtGeneralServicePerson
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtGeneralPrinterName
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtGeneralSerialNumber
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtInputDefaultIndex
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtInputMediaDimFeedDirDeclared
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtInputMaxCapacity
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtInputCurrentLevel
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtInputMediaName
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtInputName
    MIN-ACCESS  read-only
    DESCRIPTION



Bergman, et al.             Standards Track                   [Page 136]

RFC 3805                     Printer MIB v2                    June 2004


        "It is conformant to implement this object as read-only"

    OBJECT    prtInputSecurity
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtInputMediaWeight
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtInputMediaType
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtInputMediaColor
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtInputMediaFormParts
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtOutputDefaultIndex
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtOutputMaxCapacity
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtOutputRemainingCapacity
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtOutputName
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtOutputSecurity



Bergman, et al.             Standards Track                   [Page 137]

RFC 3805                     Printer MIB v2                    June 2004


    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtOutputMaxDimFeedDir
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtOutputMaxDimXFeedDir
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtOutputMinDimFeedDir
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtOutputMinDimXFeedDir
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtOutputStackingOrder
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtOutputPageDeliveryOrientation
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtOutputBursting
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtOutputDecollating
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtOutputPageCollated
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"



Bergman, et al.             Standards Track                   [Page 138]

RFC 3805                     Printer MIB v2                    June 2004


    OBJECT    prtOutputOffsetStacking
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtMarkerDefaultIndex
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtMarkerSuppliesMaxCapacity
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtMarkerSuppliesLevel
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtMediaPathDefaultIndex
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtChannelCurrentJobCntlLangIndex
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtChannelDefaultPageDescLangIndex
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtChannelState
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtChannelIfIndex
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtInterpreterDefaultOrientation
    MIN-ACCESS  read-only
    DESCRIPTION



Bergman, et al.             Standards Track                   [Page 139]

RFC 3805                     Printer MIB v2                    June 2004


        "It is conformant to implement this object as read-only"

    OBJECT    prtInterpreterDefaultCharSetIn
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtInterpreterDefaultCharSetOut
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtConsoleLocalization
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtConsoleDisable
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtConsoleDisplayBufferText
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtConsoleOnTime
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtConsoleOffTime
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtAlertIndex
    MIN-ACCESS  accessible-for-notify
    DESCRIPTION
        "It is conformant to implement this object as
        accessible-for-notify "

    GROUP    prtResponsiblePartyGroup
    DESCRIPTION
        "This group is unconditionally optional."

    GROUP    prtExtendedInputGroup



Bergman, et al.             Standards Track                   [Page 140]

RFC 3805                     Printer MIB v2                    June 2004


    DESCRIPTION
        "This group is unconditionally optional."

    GROUP    prtInputMediaGroup
    DESCRIPTION
        "This group is unconditionally optional."

    GROUP    prtExtendedOutputGroup
    DESCRIPTION
        "This group is unconditionally optional."

    GROUP    prtOutputDimensionsGroup
    DESCRIPTION
        "This group is unconditionally optional."

    GROUP    prtOutputFeaturesGroup
    DESCRIPTION
        "This group is unconditionally optional."

    GROUP    prtMarkerSuppliesGroup
    DESCRIPTION
        "This group is unconditionally optional."

    GROUP    prtMarkerColorantGroup
    DESCRIPTION
        "This group is unconditionally optional."

    GROUP    prtAlertTimeGroup
    DESCRIPTION
        "This group is unconditionally optional."

    -- the prtResponsiblePartyGroup, prtExtendedInputGroup,
    -- prtInputMediaGroup, prtExtendedOutputGroup,
    -- prtOutputDimensionsGroup, prtOutputFeaturesGroup,
    -- prtMarkerSuppliesGroup, prtMarkerColorantGroup, and the
    -- prtAlertTimeGroup are completely optional.  However, it is
    -- strongly RECOMMENDED that the prtAlertTimeGroup be implemented.

    -- New to version 2 of this printer MIB:
    OBJECT    prtAuxiliarySheetStartupPage
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtAuxiliarySheetBannerPage
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"



Bergman, et al.             Standards Track                   [Page 141]

RFC 3805                     Printer MIB v2                    June 2004


    OBJECT    prtInputMediaLoadTimeout
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    OBJECT    prtInputNextIndex
    MIN-ACCESS  read-only
    DESCRIPTION
        "It is conformant to implement this object as read-only"

    GROUP    prtAuxiliarySheetGroup
    DESCRIPTION
        "This group is unconditionally optional."

    GROUP    prtInputSwitchingGroup
    DESCRIPTION
        "This group is unconditionally optional."

    GROUP    prtGeneralV2Group
    DESCRIPTION
        "This group is unconditionally optional."

    GROUP    prtAlertTableV2Group
    DESCRIPTION
        "This group is unconditionally optional."

    GROUP    prtChannelV2Group
    DESCRIPTION
        "This group is unconditionally optional."

    GROUP    prtAlertTrapGroup
    DESCRIPTION
        "This group is unconditionally optional."
    ::= { prtMIBConformance 3 }

prtMIBGroups    OBJECT IDENTIFIER ::= { prtMIBConformance 2 }
-- These groups are from RFC 1759 and are applicable to Printer MIB V2

prtGeneralGroup OBJECT-GROUP
    OBJECTS { prtGeneralConfigChanges,
              prtGeneralCurrentLocalization,
              prtGeneralReset, prtCoverDescription,
              prtCoverStatus,
              prtLocalizationLanguage, prtLocalizationCountry,
              prtLocalizationCharacterSet, prtStorageRefIndex,
              prtDeviceRefIndex }
    STATUS  current
    DESCRIPTION



Bergman, et al.             Standards Track                   [Page 142]

RFC 3805                     Printer MIB v2                    June 2004


        "The general printer group."
    ::= { prtMIBGroups 1 }

prtResponsiblePartyGroup OBJECT-GROUP
    OBJECTS { prtGeneralCurrentOperator, prtGeneralServicePerson }
    STATUS  current
    DESCRIPTION
        "The responsible party group contains contact information for
        humans responsible for the printer."
    ::= { prtMIBGroups 2 }

prtInputGroup OBJECT-GROUP
    OBJECTS { prtInputDefaultIndex, prtInputType, prtInputDimUnit,
              prtInputMediaDimFeedDirDeclared,
              prtInputMediaDimXFeedDirDeclared,
              prtInputMediaDimFeedDirChosen,
              prtInputMediaDimXFeedDirChosen, prtInputCapacityUnit,
              prtInputMaxCapacity, prtInputCurrentLevel, prtInputStatus,
              prtInputMediaName }
    STATUS  current
    DESCRIPTION
        "The input group."
    ::= { prtMIBGroups 3 }

prtExtendedInputGroup OBJECT-GROUP
    OBJECTS { prtInputName, prtInputVendorName, prtInputModel,
              prtInputVersion, prtInputSerialNumber,
              prtInputDescription, prtInputSecurity }
    STATUS  current
    DESCRIPTION
        "The extended input group."
    ::= { prtMIBGroups 4 }

prtInputMediaGroup OBJECT-GROUP
    OBJECTS { prtInputMediaWeight, prtInputMediaType,
              prtInputMediaColor, prtInputMediaFormParts }
    STATUS  current
    DESCRIPTION
        "The input media group."
    ::= { prtMIBGroups 5 }

prtOutputGroup OBJECT-GROUP
    OBJECTS { prtOutputDefaultIndex, prtOutputType,
              prtOutputCapacityUnit, prtOutputMaxCapacity,
              prtOutputRemainingCapacity,  prtOutputStatus }
    STATUS  current
    DESCRIPTION
        "The output group."



Bergman, et al.             Standards Track                   [Page 143]

RFC 3805                     Printer MIB v2                    June 2004


    ::= { prtMIBGroups 6 }

prtExtendedOutputGroup OBJECT-GROUP
    OBJECTS { prtOutputName, prtOutputVendorName, prtOutputModel,
              prtOutputVersion, prtOutputSerialNumber,
              prtOutputDescription, prtOutputSecurity }
    STATUS  current
    DESCRIPTION
        "The extended output group."
    ::= { prtMIBGroups 7 }

prtOutputDimensionsGroup OBJECT-GROUP
    OBJECTS { prtOutputDimUnit, prtOutputMaxDimFeedDir,
              prtOutputMaxDimXFeedDir, prtOutputMinDimFeedDir,
              prtOutputMinDimXFeedDir }
    STATUS  current
    DESCRIPTION
        "The output dimensions group"
    ::= { prtMIBGroups 8 }

prtOutputFeaturesGroup OBJECT-GROUP
    OBJECTS { prtOutputStackingOrder,
              prtOutputPageDeliveryOrientation, prtOutputBursting,
              prtOutputDecollating, prtOutputPageCollated,
              prtOutputOffsetStacking }
    STATUS  current
    DESCRIPTION
        "The output features group."
    ::= { prtMIBGroups 9 }

prtMarkerGroup OBJECT-GROUP
    OBJECTS { prtMarkerDefaultIndex, prtMarkerMarkTech,
              prtMarkerCounterUnit, prtMarkerLifeCount,
              prtMarkerPowerOnCount, prtMarkerProcessColorants,
              prtMarkerSpotColorants, prtMarkerAddressabilityUnit,
              prtMarkerAddressabilityFeedDir,
              prtMarkerAddressabilityXFeedDir, prtMarkerNorthMargin,
              prtMarkerSouthMargin, prtMarkerWestMargin,
              prtMarkerEastMargin, prtMarkerStatus }
    STATUS  current
    DESCRIPTION
        "The marker group."
    ::= { prtMIBGroups 10 }

prtMarkerSuppliesGroup OBJECT-GROUP
    OBJECTS { prtMarkerSuppliesMarkerIndex,
              prtMarkerSuppliesColorantIndex, prtMarkerSuppliesClass,
              prtMarkerSuppliesType, prtMarkerSuppliesDescription,



Bergman, et al.             Standards Track                   [Page 144]

RFC 3805                     Printer MIB v2                    June 2004


              prtMarkerSuppliesSupplyUnit,
              prtMarkerSuppliesMaxCapacity, prtMarkerSuppliesLevel }
    STATUS  current
    DESCRIPTION
        "The marker supplies group."
    ::= { prtMIBGroups 11 }

prtMarkerColorantGroup OBJECT-GROUP
    OBJECTS { prtMarkerColorantMarkerIndex, prtMarkerColorantRole,
              prtMarkerColorantValue, prtMarkerColorantTonality }
    STATUS  current
    DESCRIPTION
        "The marker colorant group."
    ::= { prtMIBGroups 12 }

prtMediaPathGroup OBJECT-GROUP
    OBJECTS { prtMediaPathDefaultIndex, prtMediaPathMaxSpeedPrintUnit,
              prtMediaPathMediaSizeUnit, prtMediaPathMaxSpeed,
              prtMediaPathMaxMediaFeedDir,
              prtMediaPathMaxMediaXFeedDir,
              prtMediaPathMinMediaFeedDir,
              prtMediaPathMinMediaXFeedDir, prtMediaPathType,
              prtMediaPathDescription, prtMediaPathStatus}
    STATUS  current
    DESCRIPTION
        "The media path group."
    ::= { prtMIBGroups 13 }

prtChannelGroup OBJECT-GROUP
    OBJECTS { prtChannelType, prtChannelProtocolVersion,
              prtChannelCurrentJobCntlLangIndex,
              prtChannelDefaultPageDescLangIndex, prtChannelState,
              prtChannelIfIndex, prtChannelStatus
              }
    STATUS  current
    DESCRIPTION
        "The channel group."
    ::= { prtMIBGroups 14 }

prtInterpreterGroup OBJECT-GROUP
    OBJECTS { prtInterpreterLangFamily, prtInterpreterLangLevel,
              prtInterpreterLangVersion, prtInterpreterDescription,
              prtInterpreterVersion, prtInterpreterDefaultOrientation,
              prtInterpreterFeedAddressability,
              prtInterpreterXFeedAddressability,
              prtInterpreterDefaultCharSetIn,
              prtInterpreterDefaultCharSetOut, prtInterpreterTwoWay }
    STATUS  current



Bergman, et al.             Standards Track                   [Page 145]

RFC 3805                     Printer MIB v2                    June 2004


    DESCRIPTION
        "The interpreter group."
    ::= { prtMIBGroups 15 }

prtConsoleGroup OBJECT-GROUP
    OBJECTS { prtConsoleLocalization, prtConsoleNumberOfDisplayLines,
              prtConsoleNumberOfDisplayChars, prtConsoleDisable,
              prtConsoleDisplayBufferText, prtConsoleOnTime,
              prtConsoleOffTime, prtConsoleColor,
              prtConsoleDescription }
    STATUS  current
    DESCRIPTION
        "The console group."
    ::= { prtMIBGroups 16 }

prtAlertTableGroup OBJECT-GROUP
    OBJECTS { prtAlertSeverityLevel, prtAlertTrainingLevel,
              prtAlertGroup, prtAlertGroupIndex, prtAlertLocation,
              prtAlertCode, prtAlertDescription }
    STATUS  current
    DESCRIPTION
        "The alert table group."
    ::= { prtMIBGroups 17 }

prtAlertTimeGroup OBJECT-GROUP
    OBJECTS { prtAlertTime }
    STATUS  current
    DESCRIPTION
        "The alert time group. Implementation of prtAlertTime is
        strongly RECOMMENDED."
    ::= { prtMIBGroups 18 }

prtMIB2Groups    OBJECT IDENTIFIER ::= { prtMIBConformance 4 }
-- These groups are unique to Printer MIB V2

prtAuxiliarySheetGroup OBJECT-GROUP
    OBJECTS { prtAuxiliarySheetStartupPage,
              prtAuxiliarySheetBannerPage }
    STATUS  current
    DESCRIPTION
        "The auxiliary sheet group."
    ::= { prtMIBGroups 19 }

prtInputSwitchingGroup OBJECT-GROUP
    OBJECTS { prtInputMediaLoadTimeout, prtInputNextIndex }
    STATUS  current
    DESCRIPTION
        "The input switching group."



Bergman, et al.             Standards Track                   [Page 146]

RFC 3805                     Printer MIB v2                    June 2004


    ::= { prtMIBGroups 20 }

prtGeneralV2Group OBJECT-GROUP
    OBJECTS { prtGeneralPrinterName, prtGeneralSerialNumber }
    STATUS  current
    DESCRIPTION
        "The general printer group with new v2 objects."
    ::= { prtMIBGroups 21 }

prtAlertTableV2Group OBJECT-GROUP
    OBJECTS { prtAlertIndex, prtAlertCriticalEvents, prtAlertAllEvents }
    STATUS  current
    DESCRIPTION
        "The alert table group with new v2 objects and prtAlertIndex
        changed to MAX-ACCESS of 'read-only' for inclusion in the trap
        bindings (as originally defined in RFC 1759)."

    ::= { prtMIBGroups 22 }

prtChannelV2Group OBJECT-GROUP
    OBJECTS { prtChannelInformation }
    STATUS  current
    DESCRIPTION
        "The channel group with a new v2 object."
    ::= { prtMIBGroups 23 }

prtAlertTrapGroup NOTIFICATION-GROUP
    NOTIFICATIONS { printerV2Alert }
    STATUS  current
    DESCRIPTION
        "The alert trap group."
    ::= { prtMIBGroups 24 }

END

7.  IANA Considerations

   The initial version the IANA Printer MIB defined in section 5 of this
   document is to be archived by IANA and subsequently maintained
   according to the Process specified in section 2.4.1 of this document.
   The most current and authoritative version of the IANA Printer MIB is
   available at:

      http://www.iana.org/assignments/ianaprinter-mib

8.  Internationalization Considerations

   See section 2.2.1.1, 'International Considerations'.



Bergman, et al.             Standards Track                   [Page 147]

RFC 3805                     Printer MIB v2                    June 2004


9.  Security Considerations

   There are a number of management objects defined in this MIB module
   with a MAX-ACCESS clause of read-write and/or read-create.  Such
   objects may be considered sensitive or vulnerable in some network
   environments.  The support for SET operations in a non-secure
   environment without proper protection can have a negative effect on
   network operations.  These are the tables and objects and their
   sensitivity/vulnerability:

   prtGeneralTable:
      prtGeneralCurrentLocalization  -  Possible data loss
      prtGeneralReset  -  Possible data loss
      prtGeneralCurrentOperator  -  Possible severe inconvenience
      prtGeneralServicePerson  -  Possible severe inconvenience
      prtInputDefaultIndex  -  Possible data loss
      prtOutputDefaultIndex  -  Possible minor inconvenience
      prtMarkerDefaultIndex  -  Possible minor inconvenience
      prtMediaPathDefaultIndex  -  Possible minor inconvenience
      prtConsoleLocalization  -  Possible severe inconvenience
      prtConsoleDisable  -  Possible severe inconvenience
      prtAuxiliarySheetStartupPage  -  Possible minor inconvenience
      prtAuxiliarySheetBannerPage  -  Possible minor inconvenience
      prtGeneralPrinterName  -  Possible severe inconvenience
      prtGeneralSerialNumber  -  Possible severe inconvenience
   prtInputTable:
      prtInputMediaDimFeedDirDeclared  -  Possible data loss
      prtInputMediaDimXFeedDirDeclared  -  Possible data loss
      prtInputMaxCapacity  -  Possible minor inconvenience
      prtInputCurrentLevel  -  Possible minor inconvenience
      prtInputMediaName  -  Possible minor inconvenience
      prtInputName  -  Possible minor inconvenience
      prtInputSecurity  -  Possible minor inconvenience
      prtInputMediaWeight  -  Possible minor inconvenience
      prtInputMediaType  -  Possible minor inconvenience
      prtInputMediaColor  -  Possible minor inconvenience
      prtInputMediaFormParts  -  Possible minor inconvenience
      prtInputMediaLoadTimeout  -  Possible minor inconvenience
      prtInputNextIndex  -  Possible minor inconvenience
   prtOutputTable
      prtOutputMaxCapacity  -  Possible minor inconvenience
      prtOutputRemainingCapacity  -  Possible minor inconvenience
      prtOutputName  -  Possible minor inconvenience
      prtOutputSecurity  -  Possible minor inconvenience
      prtOutputMaxDimFeedDir  -  Possible minor inconvenience
      prtOutputMaxDimXFeedDir  -  Possible minor inconvenience
      prtOutputMinDimFeedDir  -  Possible minor inconvenience
      prtOutputMinDimXFeedDir  -  Possible minor inconvenience



Bergman, et al.             Standards Track                   [Page 148]

RFC 3805                     Printer MIB v2                    June 2004


      prtOutputStackingOrder  -  Possible minor inconvenience
      prtOutputPageDeliveryOrientation  -  Possible minor inconvenience
      prtOutputBursting  -  Possible minor inconvenience
      prtOutputDecollating  -  Possible minor inconvenience
      prtOutputPageCollated  -  Possible minor inconvenience
      prtOutputOffsetStacking  -  Possible minor inconvenience
   prtMarkerSuppliesTable
      prtMarkerSuppliesMaxCapacity  -  Possible minor inconvenience
      prtMarkerSuppliesLevel  -  Possible minor inconvenience
   prtChannelTable
      prtChannelCurrentJobCntlLangIndex  -  Possible data loss
      prtChannelDefaultPageDescLangIndex  -  Possible data loss
      prtChannelState  -  Possible minor inconvenience
      prtChannelIfIndex  -  Possible minor inconvenience
   prtInterpreterTable
      prtInterpreterDefaultOrientation  -  Possible data loss
      prtInterpreterDefaultCharSetIn  -  Possible data loss
      prtInterpreterDefaultCharSetOut  -  Possible minor inconvenience
   prtConsoleDisplayBufferTable
      prtConsoleDisplayBufferText  -  Possible minor inconvenience
   prtConsoleLightTable
      prtConsoleOnTime  -  Possible minor inconvenience
      prtConsoleOffTime  -  Possible minor inconvenience

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPSec),
   even then, there is no control as to who on the secure network is
   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.

   Where the operational capability of the printing device are
   especially vulnerable or difficult to administer, certain objects
   within this MIB have been tagged as READ-ONLY, preventing
   modification.  Further, for all READ-WRITE objects within the MIB,
   the working group has included specific conformance guidelines



Bergman, et al.             Standards Track                   [Page 149]

RFC 3805                     Printer MIB v2                    June 2004


   stating that vendors are free to implement these objects as READ-
   ONLY.  This conformance allowance should cover cases where specific
   vendor vulnerabilities may differ from product to product.  (See
   conformance section with regards to MIN-ACCESS clauses).

10.  References

10.1.  Normative References

   [ASCII]    ANSI, "Coded Character Set - 7-bit American Standard Code
              for Information Interchange", ANSI X3.4-1986.

   [CHARSET]  IANA Character Set Registry:
              http://www.iana.org/assignments/character-sets

   [CHARMIB]  IANA Character Set MIB:
              http://www.iana.org/assignments/ianacharset-mib

   [ISO10175] ISO, "Document Printing Application (DPA)", ISO 10175,
              1996.

   [ISO10646] ISO, "Universal Multiple-Octet Coded Character Set (UCS) -
              Part 1: Architecture and Basic Multilingual Plane", ISO
              10646-1, September 2000.  ISO, "Universal Multiple-Octet
              Coded Character Set (UCS) - Part 2: Supplemental Planes",
              ISO 10646-2, January 2001.

   [PWGMEDIA] IEEE-ISTO PWG "The Printer Working Group Standard for
              Media Standardized Names", IEEE-ISTO PWG 5101.1-2002.

   [RFC1213]  McCloghrie, K. and M. Rose, "Management Information Base
              for Network Management of TCP/IP-based internets: MIB-II",
              STD 17, RFC 1213, March 1991.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2277]  Alvestrand, H., "IETF Policy on Character Sets and
              Languages", BCP 18, RFC 2277, January 1998.

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", RFC 3629, November 2003.









Bergman, et al.             Standards Track                   [Page 150]

RFC 3805                     Printer MIB v2                    June 2004


   [RFC2434]  Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", BCP 26, RFC 2434,
              October 1998.

   [RFC2578]  McCloghrie, K., Perkins, D., and J. Schoenwaelder,
              "Structure of Management Information Version 2 (SMIv2)",
              STD 58, RFC 2578, April 1999.

   [RFC2579]  McCloghrie, K., Perkins, D., and J. Schoenwaelder,
              "Textual Conventions for SMIv2", STD 58, RFC 2579, April
              1999.

   [RFC2580]  McCloghrie, K., Perkins, D., and J. Schoenwaelder,
              "Conformance Statements for SMIv2", STD 58, RFC 2580,
              April 1999.

   [RFC2790]  Waldbusser, S. and P. Grillo, "Host Resources MIB", RFC
              2790, March 2000.

   [RFC2863]  McCloghrie, K. and F. Kastenholz, "The Interfaces Group
              MIB", RFC 2863, June 2000.

   [RFC3806]  Bergman, R., Lewis, H., and I. McDonald, "Printer
              Finishing MIB", RFC 3806, June 2004.

10.2.  Informative References

   [APPLEMAC] Apple staff, "Inside MacIntosh:  Networking", 1994.

   [RFC854]   Postel, J. and J. Reynolds, "Telnet Protocol
              Specification", STD 8, RFC 854, May 1983.

   [RFC959]   Postel, J. and J. Reynolds, "File Transfer Protocol", STD
              9, RFC 959, October 1985.

   [RFC1179]  McLaughlin, L., "Line printer daemon protocol", RFC 1179,
              August 1990.

   [RFC1350]  Sollins, K., "The TFTP Protocol (Revision 2)", STD 33, RFC
              1350, July 1992.

   [RFC1945]  Berners-Lee, T., Fielding, R., and H. Frystyk, "Hypertext
              Transfer Protocol - HTTP/1.0", RFC 1945, May 1996.

   [RFC2246]  Dierks, T. and C. Allen, "The TLS Protocol Version 1.0",
              RFC 2246, 1999.





Bergman, et al.             Standards Track                   [Page 151]

RFC 3805                     Printer MIB v2                    June 2004


   [RFC2396]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifiers (URI): Generic Syntax", RFC 2396,
              August 1998.

   [RFC2616]  Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
              Transfer Protocol - HTTP/1.1", RFC 2616, June 1999.

   [RFC2821]  Klensin, J., Ed., "Simple Mail Transfer Protocol", RFC
              2821, April 2001.

   [RFC2822]  Resnick, P., Ed., "Internet Message Format", RFC 2822,
              April 2001.

   [RFC2910]  Herriot, R., Ed., Butler, S., Moore, P., Turner, R., and
              J.  Wenn, "Internet Printing Protocol/1.1:  Encoding and
              Transport", RFC 2910, September 2000.

   [RFC2911]  Hastings, T., Ed., Herriot, R., deBry, R., Isaacson, S.,
              and P. Powell, "Internet Printing Protocol/1.1:  Model and
              Semantics", RFC 2911, September 2000.

   [RFC2978]  Freed, N. and J. Postel, "IANA Charset Registration
              Procedures", BCP 19, RFC 2978, October 2000.

   [RFC3232]  Reynolds, J., Ed., "Assigned Numbers:  RFC 1700 is
              Replaced by an On-line Database", RFC 3232, January 2002.

   [RFC3285]  Gahrns, M. and T. Hain, "Using Microsoft Word to create
              Internet Drafts and RFCs", RFC 3285, May 2002.

   [RFC3410]  Case, J., Mundy, R., Partain, D., and B. Stewart,
              "Introduction and Applicability Statements for Internet-
              Standard Management Framework", RFC 3410, December 2002.

















Bergman, et al.             Standards Track                   [Page 152]

RFC 3805                     Printer MIB v2                    June 2004


Appendix A - Glossary of Terms

   Addressability - On the marker, the number of distinct marking units
   (pels) per unit of addressability unit that can be set; for example,
   300 dots per inch is expressed as 300 per 1000 Thousandths Of Inches
   and 4 dots per millimeter is 4 per 1000 Micrometers.  Addressability
   is not resolution because marks that are one addressability position
   apart may not be independently resolvable by the eye due to factors
   such as gain in the area of marks so they overlap or nearly touch.

   Alert - A reportable event for which there is an entry in the alert
   table.

   Bin - An output sub-unit which may or may not be removable.

   Binary Change Event - An event which comes in pairs; the leading edge
   event and the trailing edge event.  The leading edge event enters a
   state from which there is only one exit.  A binary change event may
   be critical or non-critical. See unary change event.

   Bursting - The process by which continuous media is separated into
   individual sheets, typically by bursting along pre-formed
   perforations.

   Channel - A term used to describe a single source of data which is
   presented to a printer.  The model that we use in describing a
   printer allows for an arbitrary number of channels.  Multiple
   channels can exist on the same physical port.  This is commonly done
   over Ethernet ports where EtherTalk, TCP/IP, and SPX/IPX protocols
   can be supplying different data streams simultaneously to a single
   printer on the same physical port.

   Collation - In multiple copy output, placing the pages from separate
   copies into separate ordered sets, ready for binding.

   Control Language - A data syntax or language for controlling the
   printer through the print data channel.

   Critical Alert - An alert triggered by an event which leads to a
   state in which printing is no longer possible; the printer is
   stopped.

   Decollating - The process by which the individual parts within a
   multi-part form are separated and sorted into separate stacks for
   each part.

   Description - Information about the configuration and capabilities of
   the printer and its various sub-units.



Bergman, et al.             Standards Track                   [Page 153]

RFC 3805                     Printer MIB v2                    June 2004


   DPA - ISO 10175 Document Printing Application standard.  A standard
   for a client server protocol for a print system, including (1)
   submitting print jobs to and (2) managing print jobs in a spooler.

   Event - A state change in the printer.

   Group - A collection of objects that represent a type of sub-unit of
   the printer.

   Host Resources MIB - See [RFC2790].

   IANA - Internet Assigned Numbers Authority.  See [RFC3232].

   Idempotent - Idempotence is the property of an operation that results
   in the same state no matter how many times it is executed (at least
   once).  This is a property that is shared by true databases in which
   operations on data items only change the state of the data item and
   do not have other side effects.  Because the SNMP data model is that
   of operations on a database, SNMP MIB objects should be assumed to be
   idempotent.  If a MIB object is defined in a non-idempotent way, the
   this data model can break in subtle ways when faced with packet loss,
   multiple managers, and other common conditions.

      In order to fulfill the common need for actions to result from
      SNMP Set operations, SNMP MIB objects can be modeled such that the
      change in state from one state to another has the side effect of
      causing an action.  It is important to note that with this model,
      an SNMP operation that sets a value equal to its current value
      will cause no action.  This retains the idempotence of a single
      command, while allowing actions to be initiated by SNMP SET
      requests.

   Input - A tray or bin from which instances of the media are obtained
   and fed into the Media Path.

   Interpreter - The embodiment of an algorithm that processes a data
   stream consisting of a Page Description Language (PDL) and/or a
   Control Language.

   Localization - The specification of human language, country, and
   character set needed to present information to people in their native
   languages.

   Management Application (a.k.a. Manager) - A program which queries and
   controls one or more managed nodes.

   Management Station - A physical computer on which one or more
   management applications can run.



Bergman, et al.             Standards Track                   [Page 154]

RFC 3805                     Printer MIB v2                    June 2004


   Media Path - The mechanisms that transport instances of the media
   from an input, through the marker, possibly through media buffers and
   duplex pathways, out to the output with optional finishing applied.
   The inputs and outputs are not part of the Media Path.

   Non-critical Alert - An alert triggered by a reportable event which
   does not lead to a state in which printing is no longer possible;
   such an alert may lead to a state from which printing may no longer
   be possible in the future, such as the low toner state or the alert
   may be pure informational, such as a configuration change at the
   printer.

   Output - A bin or stacker which accepts instances of media that have
   been processed by a printer.

   Page Description Language (PDL) - A data syntax or language for the
   electronic representation of a document as a sequence of page images.

   Printer - A physical device that takes media from an input source,
   produces marks on that media according to some page description or
   page control language and puts the result in some output destination,
   possibly with finishing applied.

   Printing - The entire process of producing a printed document from
   generation of the file to be printed, choosing printing properties,
   selection of a printer, routing, queuing, resource management,
   scheduling, and finally printing including notifying the user.

   Reportable event - An event that is deemed of interest to a
   management station watching the printer.

   Status - Information regarding the current operating state of the
   printer and its various sub-units.  This is an abstraction of the
   exact physical condition of the printer.

   Sub-mechanism - A distinguishable part of a sub-unit.

   Sub-unit - A part of the printer which may be a physical part, such
   as one of the input sources or a logical part such as an interpreter.

   Tray - An input sub-unit which is typically removable.

   Unary Change Event - An event that indicates a change of state of the
   printer, but to a state which is (often) just as valid as the state
   that was left, and from which no return is necessary.  See binary
   change event.





Bergman, et al.             Standards Track                   [Page 155]

RFC 3805                     Printer MIB v2                    June 2004


   Visible state - The portion of the state of the printer that can be
   examined by a management application.

   Warning - A non-critical alert.  See non-critical alert.

Appendix B - Media Size Names

   The PWG Standardized Media Names specification [PWGMEDIA], section 5
   Self  Describing Names, contains the currently recommended media size
   names.  This appendix lists the standardized media size names from
   ISO/IEC 10175 Document Printing Application (DPA), [ISO10175] as
   presented in RFC 1759.  Management applications are encouraged to use
   the names from the PWG standard.  However, many legacy systems exist
   that use the DPA names and they are presented here for the
   convenience of developers.

   A printer implementing the Printer MIB has no knowledge of these
   names, however; all media sizes in the MIB are given in terms of
   media dimensions as the values of prtInputMediaDimFeedDirChosen and
   prtInputMediaDimXFeedDirChosen.

   String name               Description

   other

   unknown
   na-letter or letter     North American letter size: 8.5 by 11 inches
   na-legal or legal       North American legal size:  8.5 by 14 inches
   na-10x13-envelope       North American 10x13 envelope
                              size:  10 by 13 inches
   na-9x12-envelope        North American 9x12 envelope
                              size:  9 by 12 inches
   na-number-10-envelope   North American number 10 business envelope
                              size:  4.125 by 9.5 inches
   na-7x9-envelope         North American 7x9 size:  7 by 9 inches
   na-9x11-envelope        North American 9x11 size: 9 by 11 inches
   na-10x14-envelope       North American 10x14 envelope
                              size: 10 by 14 inches
   na-number-9-envelope    North American number 9 business envelope
                              size:  3.875 by 8.875 inches
   na-6x9-envelope         North American 6x9 envelope
                              size:  6 by 9 inches
   na-10x15-envelope       North American 10x15 envelope
                              size: 10 by 15 inches
   a                       engineering A size 8.5 inches by 11 inches
   b                       engineering B size 11 inches by 17 inches
   c                       engineering C size 17 inches by 22 inches
   d                       engineering D size 22 inches by 34 inches



Bergman, et al.             Standards Track                   [Page 156]

RFC 3805                     Printer MIB v2                    June 2004


   e                       engineering E size 34 inches by 44 inches
   iso-a0                  ISO A0  size:  841 mm by 1189 mm
   iso-a1                  ISO A1  size:  594 mm by  841 mm
   iso-a2                  ISO A2  size:  420 mm by  594 mm
   iso-a3                  ISO A3  size:  297 mm by  420 mm
   iso-a4                  ISO A4  size:  210 mm by  297 mm
   iso-a5                  ISO A5  size:  148 mm by  210 mm
   iso-a6                  ISO A6  size:  105 mm by  148 mm
   iso-a7                  ISO A7  size:   74 mm by  105 mm
   iso-a8                  ISO A8  size:   52 mm by   74 mm
   iso-a9                  ISO A9  size:   37 mm by   52 mm
   iso-a10                 ISO A10 size:   26 mm by   37 mm
   iso-b0                  ISO B0  size: 1000 mm by 1414 mm
   iso-b1                  ISO B1  size:  707 mm by 1000 mm
   iso-b2                  ISO B2  size:  500 mm by  707 mm
   iso-b3                  ISO B3  size:  353 mm by  500 mm
   iso-b4                  ISO B4  size:  250 mm by  353 mm
   iso-b5                  ISO B5  size:  176 mm by  250 mm
   iso-b6                  ISO B6  size:  125 mm by  176 mm
   iso-b7                  ISO B7  size:   88 mm by  125 mm
   iso-b8                  ISO B8  size:   62 mm by   88 mm
   iso-b9                  ISO B9  size:   44 mm by   62 mm
   iso-b10                 ISO B10 size:   31 mm by   44 mm
   iso-c0                  ISO C0 size:   917 mm by 1297 mm
   iso-c1                  ISO C1 size:   648 mm by  917 mm
   iso-c2                  ISO C2 size:   458 mm by  648 mm
   iso-c3                  ISO C3 size:   324 mm by  458 mm
   iso-c4                  ISO C4 size:   229 mm by  324 mm
   iso-c5                  ISO C5 size:   162 mm by  229 mm
   iso-c6                  ISO C6 size:   114 mm by  162 mm
   iso-c7                  ISO C7 size:    81 mm by  114 mm
   iso-c8                  ISO C8 size:    57 mm by   81 mm
   iso-designated          ISO Designated Long
                                  size:   110 mm by  220 mm
   jis-b0                  JIS B0  size  1030 mm by 1456 mm
   jis-b1                  JIS B1  size   728 mm by 1030 mm
   jis-b2                  JIS B2  size   515 mm by  728 mm
   jis-b3                  JIS B3  size   364 mm by  515 mm
   jis-b4                  JIS B4  size   257 mm by  364 mm
   jis-b5                  JIS B5  size   182 mm by  257 mm
   jis-b6                  JIS B6  size   128 mm by  182 mm
   jis-b7                  JIS B7  size    91 mm by  128 mm
   jis-b8                  JIS B8  size    64 mm by   91 mm
   jis-b9                  JIS B9  size    45 mm by   64 mm
   jis-b10                 JIS B10 size    32 mm by   45 mm






Bergman, et al.             Standards Track                   [Page 157]

RFC 3805                     Printer MIB v2                    June 2004


Appendix C - Media Names

   For the convenience of management application developers, this
   appendix lists the standardized media names from ISO/IEC 10175
   Document Printing Application (DPA), [ISO10175].  Management
   applications that present a dialogue for choosing media may wish to
   use these names as an alternative to separately specifying, size,
   color, and/or type.  New names may also be created using this format
   and the names defined in the PWG Standardized Media Names
   specification [PWGMEDIA].

   Using standard media names will mean that a single management
   application dealing with printers from different vendors and under
   different system mangers will tend to use the same names for the same
   media.  If selection of media by name is used, the attributes (size,
   type or color) implied by the name must be explicitly mapped to the
   appropriate object (prtInputMediaDimFeedDirDeclared,
   prtInputMediaDimXFeedDirDeclared, prtInputMediaType and
   prtInputMediaColor) in the MIB.  The object prtInputMediaName is
   intended for display to an operator and is purely descriptive.  The
   value in prtInputMediaName is not interpreted by the printer so using
   a standard name for this value will not change any of the other media
   attributes nor will it cause an alert if the media in the input sub-
   unit does not match the name.

   Simple Name                 Descriptor Text

   other
   unknown
   iso-a4-white        Specifies the ISO A4 white medium with
                         size: 210 mm by 297 mm as defined in ISO 216
   iso-a4-coloured     Specifies the ISO A4 colored medium with
                         size: 210 mm by 297 mm as defined in ISO 216
   iso-a4-transparent  Specifies the ISO A4 transparent medium with
                         size: 210 mm by 297 mm as defined in ISO 216
   iso-a3-white        Specifies the ISO A3 white medium with
                         size: 297 mm by 420 mm as defined in ISO 216
   iso-a3-coloured     Specifies the ISO A3 colored medium with
                         size: 297 mm by 420 mm as defined in ISO 216
   iso-a5-white        Specifies the ISO A5 white medium with
                         size: 148 mm by 210 mm as defined in ISO 216
   iso-a5-coloured     Specifies the ISO A5 colored medium with
                         size: 148 mm by 210 mm as defined in ISO 216
   iso-b4-white        Specifies the ISO B4 white medium with
                         size: 250 mm by 353 mm as defined in ISO 216
   iso-b4-coloured     Specifies the ISO B4 colored medium with
                         size: 250 mm by 353 mm as defined in ISO 216




Bergman, et al.             Standards Track                   [Page 158]

RFC 3805                     Printer MIB v2                    June 2004


   iso-b5-white        Specifies the ISO B5 white medium with
                         size: 176 mm by 250 mm as defined in ISO 216
   iso-b5-coloured     Specifies the ISO B5 colored medium with
                         size: 176 mm by 250 mm as defined in ISO 216
   jis-b4-white        Specifies the JIS B4 white medium with
                         size: 257 mm by 364 mm as defined in JIS P0138
   jis-b4-coloured     Specifies the JIS B4 colored medium with
                         size: 257 mm by 364 mm as defined in JIS P0138
   jis-b5-white        Specifies the JIS B5 white medium with
                         size: 182 mm by 257 mm as defined in JIS P0138
   jis-b5-coloured     Specifies the JIS B5 colored medium with
                         size: 182 mm by 257 mm as defined in JIS P0138

   The following standard values are defined for North American media:

   na-letter-white     Specifies the North American letter white
                         medium with size: 8.5 inches by 11 inches
   na-letter-coloured  Specifies the North American letter colored
                         medium with size: 8.5 inches by 11 inches
   na-letter-transparent
                       Specifies the North American letter
                         transparent medium with size: 8.5 inches
                         by 11 inches
   na-legal-white      Specifies the North American legal white
                         medium with size: 8.5 inches by 14 inches
   na-legal-coloured   Specifies the North American legal colored
                         medium with size: 8.5 inches by 14 inches

   The following standard values are defined for envelopes:

   iso-b5-envelope     Specifies the ISO B5 envelope medium
                         with size: 176 mm by 250 mm
                         as defined in ISO 216 and ISO 269
   iso-b4-envelope     Specifies the ISO B4 envelope medium
                         with size: 250 mm by 353 mm
                         as defined in ISO 216
   iso-c4-envelope     Specifies the ISO C4 envelope medium
                         with size: 229 mm by 324 mm
                         as defined in ISO 216 and ISO 269
   iso-c5-envelope     Specifies the ISO C5 envelope medium
                         with size: 162 mm by 229 mm
                         as defined in ISO 269
   iso-designated-long-envelope
                       Specifies the ISO Designated Long envelope
                         medium with size: 110 mm by 220 mm
                         as defined in ISO 269





Bergman, et al.             Standards Track                   [Page 159]

RFC 3805                     Printer MIB v2                    June 2004


   na-10x13-envelope   Specifies the North American 10x13 envelope
                         medium with size: 10 inches by 13 inches
   na-9x12-envelope    Specifies the North American 9x12 envelope
                         medium with size: 9 inches by 12 inches
   na-number-10-envelope
                       Specifies the North American number 10
                         business envelope medium with size: 4.125
                         inches by 9.5 inches
   na-7x9-envelope     Specifies the North American 7x9 inch envelope

   na-9x11-envelope    Specifies the North American 9x11 inch envelope

   na-10x14-envelope   Specifies the North American 10x14 inch envelope

   na-number-9-envelope
                       Specifies the North American number 9
                         business envelope 3.875 by 8.875 inches
   na-6x9-envelope     Specifies the North American 6x9 inch envelope

   na-10x15-envelope   Specifies the North American 10x15 inch envelope

   The following standard values are defined for the less commonly
   used media (white-only):

   iso-a0-white  Specifies the ISO A0 white medium
                   with size:  841 mm by 1189 mm
                   as defined in ISO 216
   iso-a1-white  Specifies the ISO A1 white medium
                   with size:  594 mm by 841 mm
                   as defined in ISO 216
   iso-a2-white  Specifies the ISO A2 white medium
                   with size:  420 mm by 594 mm
                   as defined in ISO 216
   iso-a6-white  Specifies the ISO A6 white medium
                   with size:  105 mm by 148 mm
                   as defined in ISO 216
   iso-a7-white  Specifies the ISO A7 white medium
                   with size:  74 mm by 105 mm
                   as defined in ISO 216
   iso-a8-white  Specifies the ISO A8 white medium
                   with size:  52 mm by 74 mm
                   as defined in ISO 216
   iso-a9-white  Specifies the ISO A9 white medium
                   with size:  39 mm by 52 mm
                   as defined in ISO 216
   iso-a10-white  Specifies the ISO A10 white medium
                   with size:  26 mm by 37 mm
                   as defined in ISO 216



Bergman, et al.             Standards Track                   [Page 160]

RFC 3805                     Printer MIB v2                    June 2004


   iso-b0-white  Specifies the ISO B0 white medium
                   with size: 1000 mm by 1414 mm
                   as defined in ISO 216
   iso-b1-white  Specifies the ISO B1 white medium
                   with size:  707 mm by 1000 mm
                   as defined in ISO 216
   iso-b2-white  Specifies the ISO B2 white medium
                   with size:  500 mm by 707 mm
                   as defined in ISO 216
   iso-b3-white  Specifies the ISO B3 white medium
                   with size:  353 mm by 500 mm
                   as defined in ISO 216
   iso-b6-white  Specifies the ISO B6 white medium
                   with size:  125 mm by 176 mm i
                   as defined in ISO 216
   iso-b7-white  Specifies the ISO B7 white medium
                   with size:  88 mm by 125 mm
                   as defined in ISO 216
   iso-b8-white  Specifies the ISO B8 white medium
                   with size:  62 mm by 88 mm
                   as defined in ISO 216
   iso-b9-white  Specifies the ISO B9 white medium
                   with size:  44 mm by 62 mm
                   as defined in ISO 216
   iso-b10-white Specifies the ISO B10 white medium
                   with size:  31 mm by 44 mm
                   as defined in ISO 216
   jis-b0-white  Specifies the JIS B0 white medium with size:
                   1030 mm by 1456 mm
   jis-b1-white  Specifies the JIS B1 white medium with size:
                   728 mm by 1030 mm
   jis-b2-white  Specifies the JIS B2 white medium with size:
                   515 mm by 728 mm
   jis-b3-white  Specifies the JIS B3 white medium with size:
                   364 mm by 515 mm
   jis-b6-white  Specifies the JIS B6 white medium with size:
                   257 mm by 364 mm
   jis-b7-white  Specifies the JIS B7 white medium with size:
                   182 mm by 257 mm
   jis-b8-white  Specifies the JIS B8 white medium with size:
                   128 mm by 182 mm
   jis-b9-white  Specifies the JIS B9 white medium with size:
                   91 mm by 128 mm
   jis-b10-white Specifies the JIS B10 white medium with size:
                   64 mm by 91 mm






Bergman, et al.             Standards Track                   [Page 161]

RFC 3805                     Printer MIB v2                    June 2004


   The following standard values are defined for engineering media:
       a        Specifies the engineering A size medium with
                   size: 8.5 inches by 11 inches
       b        Specifies the engineering B size medium with
                   size: 11 inches by 17 inches
       c        Specifies the engineering C size medium with
                   size: 17 inches by 22 inches
       d        Specifies the engineering D size medium with
                    size: 22 inches by 34 inches
       e        Specifies the engineering E size medium with
                    size: 34 inches by 44 inches

Appendix D - Roles of Users

   Background

   The need for "Role Models" stemmed in large part from the need to
   understand the importance of any given proposed object for the MIB.
   Many times the real world need for a proposed object would be debated
   within the group; the debate would typically result in the need to
   describe the potential usage of the object in terms of a "live"
   person performing some type of printing-related task.

   Determining the value of a proposed object through identification of
   the associated human users was found to be so common that a more
   formalized model was required for consistent analysis.  The model
   describing categories of human-oriented tasks is called "Role Models"
   in this document.

   In developing the Role Models it was necessary to identify the
   common, primary tasks that humans typically face when interacting
   with a printer and its related printing system(s).  It was expected
   that certain kinds of tasks would serve to identify the various Role
   Models.

   In presenting the set of Role Models, the set of "Common Print System
   Tasks" are first presented, followed by the set of Role Model
   definitions.  Finally, a simple matrix is presented in which Role
   Models and Tasks are cross-compared.

   Common Print System Tasks

   Upon researching the many tasks encountered by humans in dealing with
   printers and printing systems, the following were found to be
   pervasive within any operating environment:

   Printer job state - Determine the status of a job without a printer.




Bergman, et al.             Standards Track                   [Page 162]

RFC 3805                     Printer MIB v2                    June 2004


   Printer capabilities - Determine the current capabilities of a
   printer, for example, the available media sizes, two-sided printing,
   a particular type of interpreter, etc.

   Printer job submission - Submit a print job to a printer.

   Printer job removal - Remove a job from a printer.

   Notification of events - Receive notification of the existence of a
   defined printer event.  An event can be of many types, including
   warnings, errors, job stage completion (e.g., "job done"), etc.

   Printer configuration - Query the current configuration of a printer.

   Printer consumables - Determine the current state of any and all
   consumables within a printer.

   Print job identification - Determine the identification of a job
   within a printer.

   Internal printer status - Determine the current status of the
   printer.

   Printer identification - Determine the identity of a printer.
   Printer location - Determine the physical location of a printer.

   Local system configuration - Determine various aspects of the current
   configuration of the local system involved with the operation of a
   printer.

   These "tasks" cover a large spectrum of requirements surrounding the
   operation of a printer in a network environment.  This list serves as
   the basis for defining the various Role Models described below.

   Proposed Role Models

   Following is the list of "Role Models" used to evaluate the
   requirements for any given Printer MIB object.  Note that the keyword
   enclosed in parentheses represents an abbreviation for the particular
   Role Model in the matrix described later in this document.

   User  (USER) - A person or application that submits print jobs to the
   printer; typically viewed as the "end user" within the overall
   printing environment.







Bergman, et al.             Standards Track                   [Page 163]

RFC 3805                     Printer MIB v2                    June 2004


   Operator  (OP) - A person responsible for maintaining a printer on a
   day-to-day basis, including such tasks as filling empty media trays,
   emptying full output trays, replacing toner cartridges, clearing
   simple paper jams, etc.

   Technician  (TECH) - A person responsible for repairing a
   malfunctioning printer, performing routine preventive maintenance,
   and other tasks that typically require advanced training on the
   printer internals.  An example of a "technician" would be a
   manufacturer's Field Service representative, or other person formally
   trained by the manufacturer or similar representative.

   System Manager  (MGR) - A person responsible for configuration and
   troubleshooting of components involved in the overall printing
   environment, including printers, print queues and network
   connectivity issues.  This person is typically responsible for
   ensuring the overall operational integrity of the print system
   components, and is typically viewed as the central point of
   coordination among all other Role Models.

   Help Desk  (HELP) - A person responsible for supporting Users in
   their printing needs, including training Users and troubleshooting
   Users' printing problems.

   Asset Manager  (AM) - A person responsible for managing an
   organization's printing system assets (primarily printers).  Such a
   person needs to be able to identify and track the location of
   printing assets on an ongoing basis.

   Capacity Planner  (CP) - A person responsible for tracking the usage
   of printing resources on an ongoing basis for the purpose of planning
   printer acquisitions and/or placement of printers based on usage
   trends.

   Installer  (INST) - A person or application responsible for
   installing or configuring printing system components on a local
   system.

   Accountant  (ACCT) - A person responsible for tracking the usage of
   printing resources on an ongoing basis for the purpose of charging
   Users for resources used.

   Matrix of Common Print System Tasks and Role Models

   To better understand the relationship between the set of defined
   "Common Print System Tasks" and the various "Role Models," the
   following matrix is provided.




Bergman, et al.             Standards Track                   [Page 164]

RFC 3805                     Printer MIB v2                    June 2004


   It is important to recognize that many of the tasks will appear to be
   applicable to many of the Role Models.  However, when considering the
   actual context of a task, it is very important to realize that often
   the actual context of a task is such that the Role Model can change.

   For example, it is obvious that a "System Manager" must be able to
   submit print jobs to a printer; however, when submitting a print job,
   a person identified as a "System Manager" is actually operating in
   the context of a "User" in this case; hence, the requirement to
   submit a print job is not listed as a requirement for a System
   Manager.

   Conversely, while a "User" must be able to remove a job previously
   submitted to a printer, an "Operator" is often expected to be able to
   remove any print job from any printer; hence, print job removal is a
   (subtly different) requirement for both the "User" and "Operator"
   Role Models.

                           Role Models
                           -----------

      Requirement Area     USER OP  TECH MGR HELP  AM  CP INST ACCT
   Print job status         xx  xx   xx  xx   xx
   Printer capabilities     xx           xx   xx
   Print job submission     xx
   Print job removal        xx  xx
   Notification of events       xx   xx
   Printer configuration                 xx                xx
   Printer consumables          xx                     xx  xx
   Print job identification     xx       xx   xx       xx       xx
   Internal printer status      xx   xx  xx
   Printer identification       xx   xx  xx   xx   xx  xx  xx
   Printer location                                    xx
   Local system configuration            xx                xx

Appendix E - Overall Printer Status Table

   The Status Table establishes a convention for the top 25 printer
   errors.  The table defines a suggested relationship between various
   printer states and the variables Printer hrDeviceStatus,
   hrPrinterStatus, hrPrinterDetectedErrorState, prtAlertGroup,
   prtAlertCode and various sub-unit status variables (prtInputStatus,
   prtOutputStatus, prtMarkerStatus, prtMediaPathStatus and
   prtChannelStatus).  This table is the recommended implementation of
   these variables.  It is provided to guide implementors of this MIB
   and users of the MIB by providing a sample set of states and the
   variable values that are expected to be produced as result of that
   state.  This information supplements that provided in Section



Bergman, et al.             Standards Track                   [Page 165]

RFC 3805                     Printer MIB v2                    June 2004


   2.2.13.2 "Overall Printer Status".  This is not an exhaustive list
   rather it is a guideline.

   The definition of PrtSubUnitStatusTC specifies that SubUnitStatus is
   an integer that is the sum of 5 distinct values/states: Availability,
   Critical, Non-Critical, On-line and Transitioning.  Thus when a non-
   critical alert or alerts are present the values for Availability,
   On-Line and Transitioning will be summed with the Non- Critical
   Alerts (8) value.

   The table was generated in landscape format and is located at
   ftp://ftp.pwg.org/pub/pwg/pmp/contributions/Top25Errors.pdf.

Appendix F - Participants

   The Printer MIB Working Group would like to extend a special thank
   you to the following individuals that put forth a significant effort
   to review this document and provide numerous suggestions for
   improvement.

   David Harrington - Enterasys Networks
   Juergen Schoenwaelder - TU Braunschweig
   Bert Wijnen - Lucent Technologies and IETF Op & Mngmt, Area Director

   This version of the Printer MIB would not be possible without the
   previous work that resulted in RFC 1759.  The authors of the Printer
   MIB version 2 would like to acknowledge the following individuals for
   their efforts in developing the base for this document.  A special
   recognition is also extended to Steve Waldbusser, who provided
   significant technical guidance in the development of the architecture
   of the Printer MIB.

   Joel Gyllenskog - Microworks
   Tom Hastings - Xerox
   Jay Martin - Underscore, Inc.
   Ron Smith - Texas Instruments
   Steve Waldbusser - Lucent Technologies
   Don Wright - Lexmark
   Steve Zilles - Adobe

   The following people attended at least one meeting of the Printer MIB
   Working Group for version 2; many attended most meetings.

   Ron Bergman - Hitachi Printing Solutions
   Luis Cubero - Hewlett-Packard
   Jay Cummings - Novell
   Andy Davidson - Tektronix
   Lee Farrell - Canon



Bergman, et al.             Standards Track                   [Page 166]

RFC 3805                     Printer MIB v2                    June 2004


   Tom Hastings - Xerox
   Scott Isaacson - Novell
   Binnur Al-Kazily - Hewlett-Packard
   Rick Landau - Digital Equipment Corporation
   David Kellerman - Northlake Software
   Harry Lewis - IBM
   Pete Loya - Hewlett-Packard
   Jay Martin - Underscore, Inc.
   Bob Pentecost - Hewlett-Packard
   Dave Roach - Unisys
   Stuart Rowley - Kyocera
   Bob Setterbo - Adobe
   Mike Timperman - Lexmark
   Randy Turner - 2Wire, Inc.
   Bill Wagner - NETsilicon, Inc.
   Chris Wellens - Interworking Labs
   Craig Whittle - Sharp Labs
   Don Wright - Lexmark
   Lloyd Young - Lexmark
   Atsushi Yuki - Kyocera
   Steve Zilles - Adobe






























Bergman, et al.             Standards Track                   [Page 167]

RFC 3805                     Printer MIB v2                    June 2004


Significant Contributors

   Ray Casterline
   Lighthouse Solutions, LLC

   Phone: (716) 218-9910
   EMail: RayCasterline@lhsolutions.com

   Gary Gocek

   Phone: (585) 223-3826
   EMail: gary@gocek.org

   Thomas N. Hastings
   Xerox Corporation

   Phone:  (310) 333-6413
   EMail: hastings@cp10.es.xerox.com

   Scott Isaacson
   Novell

   Phone: (801) 861-7366
   EMail: sisaacson@novell.com

   Binnur Al-Kazily
   Hewlett-Packard, Inc.

   Phone: (208) 396-6372
   EMail: binnur_al-kazily@hp.com

   David Kellerman
   Northlake Software

   Phone: (503) 228-3383
   EMail: kellerman@nls.com

   Matt King
   Lexmark International

   Phone: (859) 232-6907
   EMail: emking@lexmark.com

   Jay Martin
   Underscore, Inc.

   Phone: (603) 889-7000
   EMail: jkm@underscore.com



Bergman, et al.             Standards Track                   [Page 168]

RFC 3805                     Printer MIB v2                    June 2004



   Mike McKay
   Novell, Inc.

   Bob Pentecost
   Hewlett-Packard

   Phone: (208) 396-3312
   EMail: bpenteco@boi.hp.com

   Stuart Rowley
   Kyocera

   Phone: (510) 299-7206
   EMail: stuart.rowley@kyocera.com

   Gail Songer
   Peerless Systems Networking

   Phone: (650) 569-4414
   EMail: gsonger@peerless.com

   Randy Turner
   2Wire, Inc.

   Phone (408) 895-1216
   EMail: rturner@2wire.com

   William Wagner
   NETsilicon, Inc.

   Phone: (781) 398-4588
   EMail: WWagner@NetSilicon.com

   Chris Wellens
   Interworking Labs

   Phone: (408) 685-3190
   EMail: chrisw@iwl.com

   F.D. Wright
   Lexmark International

   Phone: (859) 232-4808
   EMail: don@lexmark.com






Bergman, et al.             Standards Track                   [Page 169]

RFC 3805                     Printer MIB v2                    June 2004


   Lloyd Young
   Lexmark International

   Phone: (859) 232-5150
   EMail: lpyoung@lexmark.com

   Stephen N. Zilles
   Adobe Systems, Inc.

   Phone: (415) 962-4766
   EMail: szilles@adobe.com

Authors' Addresses

   Ron Bergman (Chairman)
   Hitachi Printing Solutions America
   2635 Park Center Drive
   Simi Valley, CA  93065-6209

   Phone: (805) 578-4421
   EMail: Ron.Bergman@hitachi-ps.us


   Harry Lewis
   IBM
   6300 Diagonal Hwy.
   Boulder, CO 80301

   Phone (303) 924-5337
   EMail: harryl@us.ibm.com


   Ira McDonald
   High North Inc
   P.O. Box 221
   Grand Marais, MI  49839

   Phone: (906) 494-2434 or (906) 494-2697
   EMail: imcdonald@sharplabs.com












Bergman, et al.             Standards Track                   [Page 170]

RFC 3805                     Printer MIB v2                    June 2004


Full Copyright Statement

   Copyright (C) The Internet Society (2004).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at ietf-
   ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.









Bergman, et al.             Standards Track                   [Page 171]



ERRATA