rfc6825
Internet Engineering Task Force (IETF) M. Miyazawa
Request for Comments: 6825 KDDI R&D Labs
Category: Standards Track T. Otani
ISSN: 2070-1721 K. Kumaki
KDDI Corporation
T. Nadeau
Juniper Networks
January 2013
Traffic Engineering Database Management Information Base
in Support of MPLS-TE/GMPLS
Abstract
This memo defines the Management Information Base (MIB) objects for
managing the Traffic Engineering Database (TED) information with
extensions in support of the Multiprotocol Label Switching (MPLS)
with Traffic Engineering (TE) as well as Generalized MPLS (GMPLS) for
use with network management protocols.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc6825.
Miyazawa, et al. Standards Track [Page 1]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
Copyright Notice
Copyright (c) 2013 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
This document may contain material from IETF Documents or IETF
Contributions published or made publicly available before November
10, 2008. The person(s) controlling the copyright in some of this
material may not have granted the IETF Trust the right to allow
modifications of such material outside the IETF Standards Process.
Without obtaining an adequate license from the person(s) controlling
the copyright in such materials, this document may not be modified
outside the IETF Standards Process, and derivative works of it may
not be created outside the IETF Standards Process, except to format
it for publication as an RFC or to translate it into languages other
than English.
Miyazawa, et al. Standards Track [Page 2]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
Table of Contents
1. The Internet-Standard Management Framework ......................3
2. Introduction ....................................................3
3. Overview ........................................................4
3.1. Conventions Used in This Document ..........................4
3.2. Terminology ................................................4
3.3. Acronyms ...................................................5
4. Motivations .....................................................5
5. Brief Description of MIB Module .................................5
5.1. tedTable ...................................................5
5.2. tedLocalIfAddrTable ........................................5
5.3. tedRemoteIfAddrTable .......................................5
5.4. tedSwCapTable ..............................................6
5.5. tedSrlgTable ...............................................6
6. Example of the TED MIB Module Usage .............................6
7. TED MIB Module Definitions in Support of GMPLS ..................9
8. Security Considerations ........................................35
9. IANA Considerations ............................................36
10. References ....................................................36
10.1. Normative References .....................................36
10.2. Informative References ...................................37
11. Acknowledgments ...............................................39
1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580].
2. Introduction
The OSPF MIB was originally defined for OSPF version 2 in support of
IPv4 [RFC4750] and extended to support the Internet Protocol
version 6 (IPv6) as OSPF version 3 MIB [RFC5643]. The IS-IS MIB is
also defined in [RFC4444]. On the other side, MPLS-/GMPLS-based
traffic engineering has so far extended the OSPF/IS-IS routing
protocol with TE functionality [RFC4202] [RFC3630] [RFC5329]
[RFC5307] [RFC5305]. To manage such MPLS-TE/GMPLS networks
Miyazawa, et al. Standards Track [Page 3]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
effectively, routing information associated with MPLS/GMPLS TE
parameters is preferred for network management; however, there is no
clear definition of MPLS/GMPLS TE information in existing MIBs
related to OSPF(v2 and v3)/IS-IS.
This memo defines the MIB objects for managing TED in support of
MPLS-TE/GMPLS for use with network management protocols.
This MIB module should be used in conjunction with the OSPFv2 MIB,
OSPF v3 MIB, and IS-IS MIB, as well as other MIBs defined in
[RFC3812], [RFC3813], [RFC4802], and [RFC4803] for the management of
MPLS-/GMPLS-based traffic engineering information. By implementing
such MIB modules, it is helpful to simultaneously understand the
entire MPLS/GMPLS network, for example, understanding routing
information as well as LSP information using a management system.
However, note that this MIB module is able to be implemented and
performed without implementation of other MIB modules when the
management system, for example, only comprehends MPLS/GMPLS topology
information such as TE link information.
3. Overview
3.1. Conventions Used in This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
RFC 2119 [RFC2119].
3.2. Terminology
Definitions of key terms for MPLS Operations, Administration, and
Maintenance (OAM) and GMPLS are found in [RFC4377] and [RFC3945], and
the reader is assumed to be familiar with those definitions, which
are not repeated here.
Miyazawa, et al. Standards Track [Page 4]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
3.3. Acronyms
GMPLS: Generalized Multiprotocol Label Switching
IS-IS: Intermediate System to Intermediate System
LSA: Link State Advertisement
LSP: Label Switching Path
LSR: Label Switching Router
MIB: Management Information Base
OSPF: Open Shortest Path First
PSC: Packet Switch Capable
SRLG: Shared Risk Link Group
TE: Traffic Engineering
TED: Traffic Engineering Database
TDM: Time Division Multiplexing
4. Motivations
The existing OSPFv2, OSPFv3, IS-IS, MPLS, and GMPLS MIBs do not
provide for the management interface to retrieve topology information
of MPLS and GMPLS networks.
5. Brief Description of MIB Module
The objects described in this section support the management of TED
as described in [RFC4202], [RFC4203], and [RFC5307] for GMPLS
extensions as well as in [RFC3630] and [RFC5305] for MPLS/GMPLS.
5.1. tedTable
The TED table is basically used to indicate TED information of OSPF-
TE or ISIS-TE. However, this table does not contain information for
the Local/Remote Interface IP Address, Interface Switching Capability
Descriptor, or Shared Risk Link Group information within the sub-TLVs
for the Link-TLV.
5.2. tedLocalIfAddrTable
The tedLocalIfAddrTable is identical to the Local Interface IP
Address information in a sub-TLV for the Link-TLV. This is
independently defined, because the Interface IP Address sub-TLV may
appear more than once with the same Link-TLV.
5.3. tedRemoteIfAddrTable
The tedRemoteIfAddrTable is identical to the Remote Interface IP
Address information in a sub-TLV of the Link-TLV. This is
independently defined, because the Interface IP Address sub-TLV may
appear more than once with the same Link-TLV.
Miyazawa, et al. Standards Track [Page 5]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
5.4. tedSwCapTable
The tedSwCapTable is identical to the Interface Switching Capability
Descriptor information in a sub-TLV of the Link-TLV. This is
independently defined, because the Interface Switching Capability
Descriptor sub-TLV may appear more than once with the same Link-TLV.
5.5. tedSrlgTable
The tedSrlgTable is identical to the Shared Risk Link Group
information in a sub-TLV of the Link-TLV. This table is
independently defined because the Shared Risk Link Group sub-TLV may
appear more than once with the same Link-TLV.
6. Example of the TED MIB Module Usage
In this section, we provide an example of the TED MIB module usage.
The following indicates the information of a numbered TE link
originated in a GMPLS-controlled node. When TE link information is
retrieved in an MPLS network, GMPLS-specific objects such as
tedLocalIfAddrTable, tedRemoteIfAddrTable, tedSwCapTable, and
tedSrlgTable are not supported.
By retrieval of such information periodically, the management system
can comprehend the detailed topology information related to
MPLS/GMPLS networks. In particular, the basic TED information can be
collected by tedTable, and Local/Remote Interface IP Address
information related to MPLS/GMPLS networks are collected by
tedLocalIfAddrTable and tedRemoteIfAddrTable, and the attribute
information related to GMPLS TE links can be retrieved by
tedSwCapTable and tedSrlgTable. Regarding fault management, there is
no functionality to notify network failures in this MIB module.
However, if network topologies are changed, the module can notify the
management system of the change information by using tedStatusChange,
tedEntryCreated, and tedEntryDeleted.
Note that the TED MIB module is limited to "read-only" access except
for tedCreatedDeletedNotificationMaxRate and
tedStatusChangeNotificationMaxRate. The TED MIB module is designed
to be independent of OSPF or IS-IS MIBs; however, information for
each TE link belongs to a node or a link that is managed by the
routing protocol.
Miyazawa, et al. Standards Track [Page 6]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
In tedTable:
{
tedLinkInformationData.2.3232235777.3232235778.16777264 zeroDotZero
tedLinkType.2.3232235777.3232235778.16777264 pointToPoint(1)
tedLinkState.2.3232235777.3232235778.16777264 up(1)
tedAreaId.2.3232235777.3232235778.16777264 0
tedTeRouterIdAddrType.2.3232235777.3232235778.16777264 ipv4(1)
tedTeRouterIdAddr.2.3232235777.3232235778.16777264 192.0.2.1
tedLinkIdAddrType.2.3232235777.3232235778.16777264 ipv4(1)
tedLinkIdAddr.2.3232235777.3232235778.16777264 192.0.2.10
tedMetric.2.3232235777.3232235778.16777264 1
tedMaxBandwidth.2.3232235777.3232235778.16777264 4d9450c0
tedMaxReservableBandwidth.2.3232235777.3232235778.16777264 4d9450c0
tedUnreservedBandwidthPri0.2.3232235777.3232235778.16777264 4d9450c0
tedUnreservedBandwidthPri1.2.3232235777.3232235778.16777264 4d9450c0
tedUnreservedBandwidthPri2.2.3232235777.3232235778.16777264 4d9450c0
tedUnreservedBandwidthPri3.2.3232235777.3232235778.16777264 4d9450c0
tedUnreservedBandwidthPri4.2.3232235777.3232235778.16777264 4d9450c0
tedUnreservedBandwidthPri5.2.3232235777.3232235778.16777264 4d9450c0
tedUnreservedBandwidthPri6.2.3232235777.3232235778.16777264 4d9450c0
tedUnreservedBandwidthPri7.2.3232235777.3232235778.16777264 4d9450c0
tedAdministrativeGroup.2.3232235777.3232235778.16777264 0
tedLocalId.2.3232235777.3232235778.16777264 0
tedRemoteId.2.3232235777.3232235778.16777264 0
tedLinkProtectionType.2.3232235777.3232235778.16777264 01 00 00 00 7
}
In tedLocalIfAddrTable:
{
tedLocalIfAddrType.16777264.192.0.2.21 ipv4(1)
}
In tedRemoteIfAddrTable:
{
tedRemoteIfAddrType.16777264.192.0.2.22 ipv4(1)
}
Miyazawa, et al. Standards Track [Page 7]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
In tedSwCapTable:
{
tedSwCapType.16777264.1 lsc(150)
tedSwCapEncoding.16777264.1 ethernet(2)
tedSwCapMaxLspBandwidthPri0.16777264.1 4d9450c0
tedSwCapMaxLspBandwidthPri1.16777264.1 4d9450c0
tedSwCapMaxLspBandwidthPri2.16777264.1 4d9450c0
tedSwCapMaxLspBandwidthPri3.16777264.1 4d9450c0
tedSwCapMaxLspBandwidthPri4.16777264.1 4d9450c0
tedSwCapMaxLspBandwidthPri5.16777264.1 4d9450c0
tedSwCapMaxLspBandwidthPri6.16777264.1 4d9450c0
tedSwCapMaxLspBandwidthPri7.16777264.1 4d9450c0
tedSwCapMinLspBandwidth.16777264.1 0
tedSwCapIfMtu.16777264.1 0
tedSwCapIndication.16777264.1 standard(0)
}
In tedSrlgTable:
{
tedSrlg.16777264.1 0
}
Miyazawa, et al. Standards Track [Page 8]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
7. TED MIB Module Definitions in Support of GMPLS
This MIB module makes references to the following documents:
[RFC2328], [RFC2578], [RFC2580], [RFC3630], [RFC4001], [RFC4203],
[RFC4220], [RFC4444], [RFC4801], [RFC4802], [RFC5305], [RFC5307],
[RFC5329], [RFC5340], [RFC6340], and [ISO10589].
TED-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, transmission,
NOTIFICATION-TYPE
FROM SNMPv2-SMI -- RFC 2578
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC 2580
TEXTUAL-CONVENTION, RowPointer
FROM SNMPv2-TC -- RFC 2579
IANAGmplsLSPEncodingTypeTC, IANAGmplsSwitchingTypeTC
FROM IANA-GMPLS-TC-MIB -- RFC 4802
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB -- RFC 4001
Float32TC
FROM FLOAT-TC-MIB -- RFC 6340
;
tedMIB MODULE-IDENTITY
LAST-UPDATED "201212210000Z" -- 21 Dec. 2012 00:00:00 GMT
ORGANIZATION "IETF CCAMP Working Group."
CONTACT-INFO
" Tomohiro Otani
Tm-otani@kddi.com
Masanori Miyazawa
ma-miyazawa@kddilabs.jp
Thomas D. Nadeau
tnadeau@juniper.net
Kenji Kumaki
ke-kumaki@kddi.com
Comments and discussion to ccamp@ietf.org"
Miyazawa, et al. Standards Track [Page 9]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
DESCRIPTION
"This MIB module contains managed object definitions for TED in
support of MPLS/GMPLS TE Database.
Copyright (c) 2013 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, is permitted pursuant to, and subject to the license
terms contained in, the Simplified BSD License set forth in
Section 4.c of the IETF Trust's Legal Provisions Relating to IETF
Documents (http://trustee.ietf.org/license-info)."
-- Revision history.
REVISION
"201212210000Z" -- 21 Dec. 2012 00:00:00 GMT
DESCRIPTION
"Initial version. Published as RFC 6825."
::= { transmission 273 }
-- assigned by IANA; see Section 9 for details.
-- Textual Conventions.
TedAreaIdTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The area identifier of the IGP. If OSPF is used to advertise
LSA, this represents an ospfArea. If IS-IS is used, this
represents an area address."
SYNTAX OCTET STRING (SIZE (0..20))
TedRouterIdTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The router identifier. If OSPF is used to advertise LSA, this
represents a Router ID. If IS-IS is used, this represents a
System ID."
SYNTAX OCTET STRING (SIZE (0..6))
TedLinkIndexTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The link identifier. If OSPF is used, this represents an
ospfLsdbID. If IS-IS is used, this represents an isisLSPID.
If a locally configured link is used, this object represents an
arbitrary value, which is locally defined in a router."
SYNTAX OCTET STRING (SIZE (0..8))
Miyazawa, et al. Standards Track [Page 10]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
-- Top-level components of this MIB module.
tedNotifications OBJECT IDENTIFIER ::= { tedMIB 0 }
tedObjects OBJECT IDENTIFIER ::= { tedMIB 1 }
tedConformance OBJECT IDENTIFIER ::= { tedMIB 2 }
-- TED Table
tedTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table indicates multiple TED information, which has been
supported by RFC 3630 and RFC 5305."
::= { tedObjects 1 }
tedEntry OBJECT-TYPE
SYNTAX TedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains TED information commonly utilized in both
MPLS and GMPLS."
INDEX { tedLocalRouterId, tedRemoteRouterId,
tedLinkInformationSource, tedLinkIndex }
::= { tedTable 1 }
TedEntry ::= SEQUENCE {
tedLinkInformationSource INTEGER,
tedLocalRouterId TedRouterIdTC,
tedRemoteRouterId TedRouterIdTC,
tedLinkIndex TedLinkIndexTC,
tedLinkInformationData RowPointer,
tedLinkState INTEGER,
tedAreaId TedAreaIdTC,
tedLinkType INTEGER,
tedTeRouterIdAddrType InetAddressType,
tedTeRouterIdAddr InetAddress,
tedLinkIdAddrType InetAddressType,
tedLinkIdAddr InetAddress,
tedMetric Integer32,
tedMaxBandwidth Float32TC,
tedMaxReservableBandwidth Float32TC,
tedUnreservedBandwidthPri0 Float32TC,
tedUnreservedBandwidthPri1 Float32TC,
tedUnreservedBandwidthPri2 Float32TC,
Miyazawa, et al. Standards Track [Page 11]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
tedUnreservedBandwidthPri3 Float32TC,
tedUnreservedBandwidthPri4 Float32TC,
tedUnreservedBandwidthPri5 Float32TC,
tedUnreservedBandwidthPri6 Float32TC,
tedUnreservedBandwidthPri7 Float32TC,
tedAdministrativeGroup Integer32,
tedLocalId Integer32,
tedRemoteId Integer32,
tedLinkProtectionType BITS
}
tedLinkInformationSource OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
locallyConfigured(1),
ospfv2(2),
ospfv3(3),
isis(4),
other(5)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the source of the information about the
TE link."
::= { tedEntry 1 }
tedLocalRouterId OBJECT-TYPE
SYNTAX TedRouterIdTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the Router ID of the router originating
the LSA. If OSPF is used to advertise LSA, this represents a
Router ID. If IS-IS is used, this represents a System ID.
Otherwise, this represents zero."
REFERENCE
"OSPF Version 2, RFC 2328, Appendix C.1
OSPF for IPv6, RFC 5340, Appendix C.1
ISO10589, Section 7.1"
::= { tedEntry 2 }
Miyazawa, et al. Standards Track [Page 12]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
tedRemoteRouterId OBJECT-TYPE
SYNTAX TedRouterIdTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the router at the remote end of the link
from the originating router. If OSPF is used to advertise LSA,
this represents a Link ID in the Link TLV. If IS-IS is used,
this represents a neighbor System ID defined in RFC 5305.
Otherwise, this represents zero."
REFERENCE
"OSPF Version 2, RFC 2328, Appendix C.1
OSPF for IPv6, RFC 5340, Appendix C.1
ISO10589, Section 7.1"
::= { tedEntry 3 }
tedLinkIndex OBJECT-TYPE
SYNTAX TedLinkIndexTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the link state identifier. If OSPF is
used, this represents an ospfLsdbID. If IS-IS is used, this
represents an isisLSPID. Otherwise, this represents a unique
identifier within a node."
REFERENCE
"OSPF Version 2, RFC 2328, Appendix A.4.1,
OSPF for IPv6, RFC 5340, Appendix A.4.2
ISO10589, Section 9.8 "
::= { tedEntry 4 }
tedLinkInformationData OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If tedLinkInformationSource has the value unknown(0), this
object MUST contain a value of zeroDotZero.
If tedLinkInformationSource has the value locallyConfigured(1),
an implementation can use this object to supply the identifier
of the corresponding row entry in the teLinkTable of TE-LINK-
STD-MIB (RFC 4220), the identifier of the corresponding row in
a local proprietary TE link MIB module, or the value of
zeroDotZero.
If tedLinkInformationSource has the value ospfv2(2) and
ospfv3(3), an implementation can use this object to supply the
Miyazawa, et al. Standards Track [Page 13]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
identifier of the corresponding row entry in the
ospfLocalLsdbTable (OSPFv2-MIB) and the ospfv3AreaLsdbTable
(OSPFv3-MIB), or the value of zeroDotZero.
If tedLinkInformationSource has the value isis(4), an
implementation can use this object to supply the identifier of
the corresponding row entry in the isisAreaAddr of ISIS-MIB
(RFC 4444), or the value of zeroDotZero.
If tedLinkInformationSource has the value other(5), an
implementation can use this object to supply the identifier of
the corresponding row entry in the local proprietary MIB module,
or the value of zeroDotZero."
::= { tedEntry 5 }
tedLinkState OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the actual operational state of this TE
link. For instance, if a row is created in the TED table, but
the actual TE link is not available for some reason (e.g., when
there is not yet a physical link or the link has been manually
disabled), then the object would be down(2) state.
In contrast, if a row is added and the TE link is available,
this would be operationally up(1)."
::= { tedEntry 6 }
tedAreaId OBJECT-TYPE
SYNTAX TedAreaIdTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the area identifier of the IGP. If OSPF
is used to advertise LSA, this represents an ospfArea. If IS-IS
is used, this represents an area address. Otherwise, this
represents zero."
REFERENCE
"OSPF Version 2, RFC 2328, Appendix C.2
OSPF for IPv6, RFC 5340, Appendix C.2
ISO10589, Section 9.8"
::= { tedEntry 7 }
Miyazawa, et al. Standards Track [Page 14]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
tedLinkType OBJECT-TYPE
SYNTAX INTEGER {
pointToPoint (1),
multiAccess (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the type of the link, such as point to point or
multi-access."
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.5.1"
::= { tedEntry 8 }
tedTeRouterIdAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the TE-Router ID address type. Only
values unknown(0), ipv4(1), or ipv6(2) are supported."
::= { tedEntry 9 }
tedTeRouterIdAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the TE-Router ID."
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.4.1
IS-IS extensions for TE, RFC 5305, Section 4.3"
::= { tedEntry 10 }
tedLinkIdAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the address type of the TE Link ID. Only
values unknown(0), ipv4(1), or ipv6(2) are supported."
::= { tedEntry 11 }
tedLinkIdAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
Miyazawa, et al. Standards Track [Page 15]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
STATUS current
DESCRIPTION
"This indicates the Router ID of the neighbor in the case of
point-to-point links. This also indicates the interface
address of the designated router in the case of multi-access
links."
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.5.2
IS-IS extensions for TE, RFC 5305, Section 4.3"
::= { tedEntry 12 }
tedMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the traffic engineering metric value of the TE
link."
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.5.5
IS-IS extensions for TE, RFC 5305, Section 3.7"
::= { tedEntry 13 }
tedMaxBandwidth OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the maximum bandwidth that can be used on this
link in this direction."
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.5.6
IS-IS extensions for TE, RFC 5305, Section 3.4"
::= { tedEntry 14 }
tedMaxReservableBandwidth OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the maximum bandwidth that may be reserved on
this link in this direction."
Miyazawa, et al. Standards Track [Page 16]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.5.7
IS-IS extensions for TE, RFC 5305, Section 3.5"
::= { tedEntry 15 }
tedUnreservedBandwidthPri0 OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the
priority 0."
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.5.8
IS-IS extensions for TE, RFC 5305, Section 3.6"
::= { tedEntry 16 }
tedUnreservedBandwidthPri1 OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the
priority 1."
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.5.8
IS-IS extensions for TE, RFC 5305, Section 3.6"
::= { tedEntry 17 }
tedUnreservedBandwidthPri2 OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the
priority 2."
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.5.8
IS-IS extensions for TE, RFC 5305, Section 3.6"
::= { tedEntry 18 }
Miyazawa, et al. Standards Track [Page 17]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
tedUnreservedBandwidthPri3 OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the
priority 3."
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.5.8
IS-IS extensions for TE, RFC 5305, Section 3.6"
::= { tedEntry 19 }
tedUnreservedBandwidthPri4 OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the
priority 4."
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.5.8
IS-IS extensions for TE, RFC 5305, Section 3.6"
::= { tedEntry 20 }
tedUnreservedBandwidthPri5 OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the
priority 5."
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.5.8
IS-IS extensions for TE, RFC 5305, Section 3.6"
::= { tedEntry 21 }
tedUnreservedBandwidthPri6 OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
Miyazawa, et al. Standards Track [Page 18]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the
priority 6."
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.5.8
IS-IS extensions for TE, RFC 5305, 3.6"
::= { tedEntry 22 }
tedUnreservedBandwidthPri7 OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the
priority 7."
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.5.8
IS-IS extensions for TE, RFC 5305, Section 3.6"
::= { tedEntry 23 }
tedAdministrativeGroup OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the Administrative Group to which the link
belongs. Since the value is a bit mask, the link can belong
to multiple groups. This is also called Resource Class/Color."
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.5.9
IS-IS extensions for TE, RFC 5305, Section 3.1"
::= { tedEntry 24 }
tedLocalId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the Link Local Identifier of an unnumbered
link."
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.1
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.1"
::= { tedEntry 25 }
Miyazawa, et al. Standards Track [Page 19]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
tedRemoteId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the Link Remote Identifier of an unnumbered
link."
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.1
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.1"
::= { tedEntry 26 }
tedLinkProtectionType OBJECT-TYPE
SYNTAX BITS {
extraTraffic(0),
unprotected(1),
shared (2),
dedicatedOneToOne (3),
dedicatedOnePlusOne(4),
enhanced(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the protection type of the TE link."
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.2
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.2"
::= { tedEntry 27 }
-- TED Local Interface IP Address Table
tedLocalIfAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedLocalIfAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the IP address information of a local TE
link."
::= { tedObjects 2 }
tedLocalIfAddrEntry OBJECT-TYPE
SYNTAX TedLocalIfAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains the IP address information of the local TE
link."
Miyazawa, et al. Standards Track [Page 20]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
INDEX { tedLinkIndex, tedLocalIfAddr }
::= { tedLocalIfAddrTable 1 }
TedLocalIfAddrEntry ::= SEQUENCE {
tedLocalIfAddrType InetAddressType,
tedLocalIfAddr InetAddress
}
tedLocalIfAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the address type of the local TE link.
Only values unknown(0), ipv4(1), or ipv6(2) have to be
supported."
::= { tedLocalIfAddrEntry 1 }
tedLocalIfAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the address of the local TE link."
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.5.3,
Traffic Engineering Extensions to OSPF Version 3, RFC 5329,
Section 4.3
IS-IS extensions for TE, RFC 5305, Section 3.4"
::= { tedLocalIfAddrEntry 2 }
-- TED Remote Interface IP Address Table
tedRemoteIfAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedRemoteIfAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the IP address information of a remote TE
link."
::= { tedObjects 3 }
tedRemoteIfAddrEntry OBJECT-TYPE
SYNTAX TedRemoteIfAddrEntry
MAX-ACCESS not-accessible
STATUS current
Miyazawa, et al. Standards Track [Page 21]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
DESCRIPTION
"This entry contains the IP address information of the remote
TE link."
INDEX { tedLinkIndex, tedRemoteIfAddr }
::= { tedRemoteIfAddrTable 1 }
TedRemoteIfAddrEntry ::= SEQUENCE {
tedRemoteIfAddrType InetAddressType,
tedRemoteIfAddr InetAddress
}
tedRemoteIfAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the address type of the remote TE link."
::= { tedRemoteIfAddrEntry 1 }
tedRemoteIfAddr OBJECT-TYPE
SYNTAX InetAddress(SIZE (1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the address of the remote TE link."
REFERENCE
"Traffic Engineering (TE) Extensions to OSPF Version 2,
RFC 3630, Section 2.5.4,
Traffic Engineering Extensions to OSPF Version3, RFC 5329,
Section 4.4
IS-IS extensions for TE, RFC 5305, Section 3.3"
::= { tedRemoteIfAddrEntry 2 }
-- TED Switching Capability Table
tedSwCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedSwCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the GMPLS TED switching capability
information."
::= { tedObjects 4 }
tedSwCapEntry OBJECT-TYPE
SYNTAX TedSwCapEntry
MAX-ACCESS not-accessible
STATUS current
Miyazawa, et al. Standards Track [Page 22]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
DESCRIPTION
"This entry relates each TE link with its GMPLS TE switching
capability information. If the MIB module deals with only OSPF-
TE information, the value of each object related with GMPLS TE
extensions should be null."
INDEX { tedLinkIndex, tedSwCapIndex }
::= { tedSwCapTable 1 }
TedSwCapEntry ::= SEQUENCE {
tedSwCapIndex Unsigned32,
tedSwCapType IANAGmplsSwitchingTypeTC,
tedSwCapEncoding IANAGmplsLSPEncodingTypeTC,
tedSwCapMaxLspBandwidthPri0 Float32TC,
tedSwCapMaxLspBandwidthPri1 Float32TC,
tedSwCapMaxLspBandwidthPri2 Float32TC,
tedSwCapMaxLspBandwidthPri3 Float32TC,
tedSwCapMaxLspBandwidthPri4 Float32TC,
tedSwCapMaxLspBandwidthPri5 Float32TC,
tedSwCapMaxLspBandwidthPri6 Float32TC,
tedSwCapMaxLspBandwidthPri7 Float32TC,
tedSwCapMinLspBandwidth Float32TC,
tedSwCapIfMtu Integer32,
tedSwCapIndication INTEGER
}
tedSwCapIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index is utilized to identify multiple switching
functions on a local or remote TE link according to definitions
of textual conventions of GMPLS, RFC 4801."
::= { tedSwCapEntry 1 }
tedSwCapType OBJECT-TYPE
SYNTAX IANAGmplsSwitchingTypeTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the GMPLS switching capability assigned
to the TE link according to definitions of textual conventions
of GMPLS, RFC 4801."
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
::= { tedSwCapEntry 2 }
Miyazawa, et al. Standards Track [Page 23]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
tedSwCapEncoding OBJECT-TYPE
SYNTAX IANAGmplsLSPEncodingTypeTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the GMPLS encoding type assigned to the
TE link."
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
::= { tedSwCapEntry 3 }
tedSwCapMaxLspBandwidthPri0 OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at
the priority 0 for GMPLS LSP creation."
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
::= { tedSwCapEntry 4 }
tedSwCapMaxLspBandwidthPri1 OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at
the priority 1 for GMPLS LSP creation."
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
::= { tedSwCapEntry 5 }
tedSwCapMaxLspBandwidthPri2 OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at
the priority 2 for GMPLS LSP creation."
Miyazawa, et al. Standards Track [Page 24]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
::= { tedSwCapEntry 6 }
tedSwCapMaxLspBandwidthPri3 OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at
the priority 3 for GMPLS LSP creation."
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
::= { tedSwCapEntry 7 }
tedSwCapMaxLspBandwidthPri4 OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at
the priority 4 for GMPLS LSP creation."
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
::= { tedSwCapEntry 8 }
tedSwCapMaxLspBandwidthPri5 OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at
the priority 5 for GMPLS LSP creation."
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
::= { tedSwCapEntry 9 }
tedSwCapMaxLspBandwidthPri6 OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
Miyazawa, et al. Standards Track [Page 25]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
STATUS current
DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at
the priority 6 for GMPLS LSP creation."
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
::= { tedSwCapEntry 10 }
tedSwCapMaxLspBandwidthPri7 OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at
the priority 7 for GMPLS LSP creation."
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
::= { tedSwCapEntry 11 }
tedSwCapMinLspBandwidth OBJECT-TYPE
SYNTAX Float32TC
UNITS "Byte per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the minimum bandwidth of the TE link for
GMPLS LSP creation if the switching capability field is TDM,
PSC-1, PSC-2, PSC-3, or PSC-4."
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
::= { tedSwCapEntry 12 }
tedSwCapIfMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the MTU of the local or remote TE link."
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
::= { tedSwCapEntry 13 }
Miyazawa, et al. Standards Track [Page 26]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
tedSwCapIndication OBJECT-TYPE
SYNTAX INTEGER {
standard (0),
arbitrary (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the interface supports Standard
or Arbitrary SONET/SDH."
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
::= { tedSwCapEntry 14 }
-- TED SRLG Table
tedSrlgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedSrlgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the SRLG information of the TE link."
::= { tedObjects 5 }
tedSrlgEntry OBJECT-TYPE
SYNTAX TedSrlgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry relates each TE link with its SRLG information."
INDEX { tedLinkIndex, tedSrlgIndex }
::= { tedSrlgTable 1 }
TedSrlgEntry ::= SEQUENCE {
tedSrlgIndex Unsigned32,
tedSrlg Integer32
}
tedSrlgIndex OBJECT-TYPE
SYNTAX Unsigned32(1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index is utilized to identify multiple SRLG values on a
local or remote TE link. This object represents an arbitrary
value, which is locally defined in a router."
Miyazawa, et al. Standards Track [Page 27]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
REFERENCE
"OSPF Extensions in support of GMPLS, RFC 4203, Section 1.3
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.4"
::= { tedSrlgEntry 1 }
tedSrlg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the SRLG value assigned to a local or
remote TE link."
REFERENCE
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.3
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.4"
::= { tedSrlgEntry 2 }
-- Notification Configuration
tedStatusChangeNotificationMaxRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A lot of notifications relating to the status change are
expected to generate in a node, especially when a network
failure occurs and might cause a performance degradation of the
node itself. To avoid such a defect, this object provides the
maximum number of notifications generated per minute. If
events occur more rapidly, the implementation may simply fail
to emit these notifications during that period, or may queue
them until an appropriate time. A value of 0 means no
throttling is applied and events may be notified at the rate at
which they occur."
DEFVAL {1}
::= { tedObjects 6 }
tedCreatedDeletedNotificationMaxRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A lot of notifications relating to new registration in the TED
table by receiving new TE link information or deletion of
existing entries in the TED table are expected to generate in a
node. This object provides the maximum number of notifications
generated per minute."
Miyazawa, et al. Standards Track [Page 28]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
DEFVAL {1}
::= { tedObjects 7 }
-- Notifications
tedStatusChange NOTIFICATION-TYPE
OBJECTS {
tedLinkState
}
STATUS current
DESCRIPTION
"This notification signifies that there has been change in the
TE information of tedTable, tedLocalIfAddrTable,
tedRemoteIfAddrTable, tedSwCapTable, and/or tedSrlgTable. For
example, this should be generated when tedUnreservedBandwidth is
changed to create or delete LSP using the registered TE link."
::= { tedNotifications 1 }
tedEntryCreated NOTIFICATION-TYPE
OBJECTS {
tedLinkState
}
STATUS current
DESCRIPTION
"This notification signifies that there has been new
registration in the TED table by receiving new TE link
information. For example, this should be generated when a new
index (tedLinkIndex) is registered in the TED table."
::= { tedNotifications 2 }
tedEntryDeleted NOTIFICATION-TYPE
OBJECTS {
tedLinkState
}
STATUS current
DESCRIPTION
"This notification signifies that there has been deletion of an
entry in the TED table. For example, this should be generated
when one of the existing entries is deleted in the TED table."
::= { tedNotifications 3 }
-- Conformance Statement
tedCompliances
OBJECT IDENTIFIER ::= { tedConformance 1 }
tedGroups
OBJECT IDENTIFIER ::= { tedConformance 2 }
Miyazawa, et al. Standards Track [Page 29]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
-- Module Compliance
tedModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents provides full support for the
TED MIB."
MODULE -- this module
MANDATORY-GROUPS { tedMainGroup,
tedObjectsGroup,
tedNotificationGroup
}
GROUP tedUnnumberedLinkGroup
DESCRIPTION
"This group is mandatory for TE links that support the
unnumbered links."
GROUP tedNumberedLinkGroup
DESCRIPTION
"This group is mandatory for TE links that support the
numbered links."
GROUP tedSwCapGroup
DESCRIPTION
"This group is mandatory for TE links that support GMPLS
switching capability."
GROUP tedSwCapMinLspBandwidthGroup
DESCRIPTION
"This group is mandatory for TE links if the switching
capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4."
GROUP tedSwCapIfMtuGroup
DESCRIPTION
"This group is mandatory for TE links that support the MTU of
the local or remote TE link."
GROUP tedSwCapIndicationGroup
DESCRIPTION
"This group is mandatory for TE links that support Standard or
Arbitrary SONET/SDH."
Miyazawa, et al. Standards Track [Page 30]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
GROUP tedSrlgGroup
DESCRIPTION
"This group is mandatory for TE links that support SRLG
information."
::= { tedCompliances 1 }
--
-- ReadOnly Compliance
--
tedModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance requirement for implementations only provides read-
only support for TED. Such devices can then be monitored but
cannot be configured using this MIB module."
MODULE -- this module
MANDATORY-GROUPS { tedMainGroup
}
GROUP tedUnnumberedLinkGroup
DESCRIPTION
"This group is mandatory for TE links that support the
unnumbered links."
GROUP tedNumberedLinkGroup
DESCRIPTION
"This group is mandatory for TE links that support the
numbered links."
GROUP tedSwCapGroup
DESCRIPTION
"This group is mandatory for TE links that support some GMPLS
switching capabilities."
GROUP tedSwCapMinLspBandwidthGroup
DESCRIPTION
"This group is mandatory for TE links if the switching
capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4."
GROUP tedSwCapIfMtuGroup
DESCRIPTION
"This group is mandatory for TE links that support the MTU of
the local or remote TE link."
Miyazawa, et al. Standards Track [Page 31]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
GROUP tedSwCapIndicationGroup
DESCRIPTION
"This group is mandatory for TE links that support Standard or
Arbitrary SONET/SDH."
GROUP tedSrlgGroup
DESCRIPTION
"This group is mandatory for TE links that support SRLG
information."
::= { tedCompliances 2 }
-- Units of conformance
tedMainGroup OBJECT-GROUP
OBJECTS {
tedLinkState,
tedAreaId,
tedLinkType,
tedTeRouterIdAddrType,
tedTeRouterIdAddr,
tedLinkIdAddrType,
tedLinkIdAddr,
tedMetric,
tedMaxBandwidth,
tedMaxReservableBandwidth,
tedUnreservedBandwidthPri0,
tedUnreservedBandwidthPri1,
tedUnreservedBandwidthPri2,
tedUnreservedBandwidthPri3,
tedUnreservedBandwidthPri4,
tedUnreservedBandwidthPri5,
tedUnreservedBandwidthPri6,
tedUnreservedBandwidthPri7,
tedAdministrativeGroup,
tedLinkProtectionType,
tedLinkInformationData
}
STATUS current
DESCRIPTION
"Collection of objects for TED management"
::= { tedGroups 1 }
tedObjectsGroup OBJECT-GROUP
OBJECTS {
tedStatusChangeNotificationMaxRate,
tedCreatedDeletedNotificationMaxRate
}
Miyazawa, et al. Standards Track [Page 32]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
STATUS current
DESCRIPTION
"The objects needed to implement notification."
::= { tedGroups 2 }
tedNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
tedStatusChange,
tedEntryCreated,
tedEntryDeleted
}
STATUS current
DESCRIPTION
"This group is mandatory for those implementations that can
implement the notifications contained in this group."
::= { tedGroups 3 }
tedUnnumberedLinkGroup OBJECT-GROUP
OBJECTS {
tedLocalId,
tedRemoteId
}
STATUS current
DESCRIPTION
"The objects needed to implement the unnumbered links."
::= { tedGroups 4 }
tedNumberedLinkGroup OBJECT-GROUP
OBJECTS {
tedLocalIfAddrType,
tedRemoteIfAddrType
}
STATUS current
DESCRIPTION
"The objects needed to implement the numbered links."
::= { tedGroups 5 }
tedSwCapGroup OBJECT-GROUP
OBJECTS {
tedSwCapType,
tedSwCapEncoding,
tedSwCapMaxLspBandwidthPri0,
tedSwCapMaxLspBandwidthPri1,
tedSwCapMaxLspBandwidthPri2,
tedSwCapMaxLspBandwidthPri3,
tedSwCapMaxLspBandwidthPri4,
Miyazawa, et al. Standards Track [Page 33]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
tedSwCapMaxLspBandwidthPri5,
tedSwCapMaxLspBandwidthPri6,
tedSwCapMaxLspBandwidthPri7
}
STATUS current
DESCRIPTION
"The objects needed to implement the TE links with GMPLS TE
switching capability information."
::= { tedGroups 6 }
tedSwCapMinLspBandwidthGroup OBJECT-GROUP
OBJECTS {
tedSwCapMinLspBandwidth
}
STATUS current
DESCRIPTION
"The objects needed to implement the minimum bandwidth of the
TE link for GMPLS LSP creation."
::= { tedGroups 7 }
tedSwCapIfMtuGroup OBJECT-GROUP
OBJECTS {
tedSwCapIfMtu
}
STATUS current
DESCRIPTION
"The objects needed to implement the MTU information of the
local or remote TE link."
::= { tedGroups 8 }
tedSwCapIndicationGroup OBJECT-GROUP
OBJECTS {
tedSwCapIndication
}
STATUS current
DESCRIPTION
"The objects needed to implement the indication of whether the
interface supports Standard or Arbitrary SONET/SDH."
::= { tedGroups 9 }
Miyazawa, et al. Standards Track [Page 34]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
tedSrlgGroup OBJECT-GROUP
OBJECTS {
tedSrlg
}
STATUS current
DESCRIPTION
"The objects needed to implement multiple SRLG values with
GMPLS TE information."
::= { tedGroups 10 }
END
8. Security Considerations
There are several objects defined in this MIB module that have a MAX-
ACCESS clause of read-write. Such objects may be considered
sensitive or vulnerable in some network environments. The support
for SET operations in a non-secure environment without proper
protection can have a negative effect on network operations.
Some of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over
the network via SNMP. These are the tables and objects and their
sensitivity/vulnerability: tedTable, tedLocalIfAddrTable,
tedRemoteIfAddrTable, tedSwCapTable, and tedSrlgTable contain
topology information for the MPLS/GMPLS network. If an administrator
does not want to reveal this information, then these tables should be
considered sensitive/vulnerable.
There are only two write-access objects in this MIB module:
tedStatusChangeNotificationMaxRate and
tedCreatedDeletedNotificationMaxRate. Malicious modification of
these objects could cause the management agent, the network, or the
router to become overloaded with notifications in cases of high churn
within the network.
SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPsec),
even then, there is no control as to who on the secure network is
allowed to access and GET/SET (read/change/create/delete) the objects
in this MIB module.
Implementations MUST provide the security features described by the
SNMPv3 framework (see [RFC3410]), including full support for
authentication and privacy via the User-based Security Model (USM)
Miyazawa, et al. Standards Track [Page 35]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
[RFC3414] with the AES cipher algorithm [RFC3826]. Implementations
MAY also provide support for the Transport Security Model (TSM)
[RFC5591] in combination with a secure transport such as SSH
[RFC5592] or TLS/DTLS [RFC6353].
Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them.
9. IANA Considerations
IANA has assigned 273 to the TED-MIB module specified in this
document in the "Internet-standard MIB - Transmission Group"
registry. New assignments can only be made via Specification
Required as specified in [RFC5226].
In addition, the IANA has marked value 273 (the corresponding
transmission value allocated according to this document) as
"Reserved" in the "ifType definitions" registry.
10. References
10.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2328] Moy, J., "OSPF Version 2", STD 54, RFC 2328, April 1998.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Structure of Management Information
Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Textual Conventions for SMIv2",
STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Conformance Statements for SMIv2",
STD 58, RFC 2580, April 1999.
[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
Schoenwaelder, "Textual Conventions for Internet Network
Addresses", RFC 4001, February 2005.
Miyazawa, et al. Standards Track [Page 36]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
[RFC3630] Katz, D., Kompella, K., and D. Yeung, "Traffic Engineering
(TE) Extensions to OSPF Version 2", RFC 3630,
September 2003.
[RFC4203] Kompella, K., Ed., and Y. Rekhter, Ed., "OSPF Extensions
in Support of Generalized Multi-Protocol Label Switching
(GMPLS)", RFC 4203, October 2005.
[RFC4750] Joyal, D., Ed., Galecki, P., Ed., Giacalone, S., Ed.,
Coltun, R., and F. Baker, "OSPF Version 2 Management
Information Base", RFC 4750, December 2006.
[RFC4801] Nadeau, T., Ed., and A. Farrel, Ed., "Definitions of
Textual Conventions for Generalized Multiprotocol Label
Switching (GMPLS) Management", RFC 4801, February 2007.
[RFC5329] Ishiguro, K., Manral, V., Davey, A., and A. Lindem, Ed.,
"Traffic Engineering Extensions to OSPF Version 3",
RFC 5329, September 2008.
[RFC5340] Coltun, R., Ferguson, D., Moy, J., and A. Lindem, "OSPF
for IPv6", RFC 5340, July 2008.
[RFC5643] Joyal, D., Ed., and V. Manral, Ed., "Management
Information Base for OSPFv3", RFC 5643, August 2009.
[RFC6340] Presuhn, R., "Textual Conventions for the Representation
of Floating-Point Numbers", RFC 6340, August 2011.
10.2. Informative References
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for
Internet-Standard Management Framework", RFC 3410,
December 2002.
[RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", STD 62, RFC 3414, December 2002.
[RFC3812] Srinivasan, C., Viswanathan, A., and T. Nadeau,
"Multiprotocol Label Switching (MPLS) Traffic Engineering
(TE) Management Information Base (MIB)", RFC 3812,
June 2004.
Miyazawa, et al. Standards Track [Page 37]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
[RFC3813] Srinivasan, C., Viswanathan, A., and T. Nadeau,
"Multiprotocol Label Switching (MPLS) Label Switching
Router (LSR) Management Information Base (MIB)", RFC 3813,
June 2004.
[RFC3826] Blumenthal, U., Maino, F., and K. McCloghrie, "The
Advanced Encryption Standard (AES) Cipher Algorithm in the
SNMP User-based Security Model", RFC 3826, June 2004.
[RFC3945] Mannie, E., Ed., "Generalized Multi-Protocol Label
Switching (GMPLS) Architecture", RFC 3945, October 2004.
[RFC4202] Kompella, K., Ed., and Y. Rekhter, Ed., "Routing
Extensions in Support of Generalized Multi-Protocol Label
Switching (GMPLS)", RFC 4202, October 2005.
[RFC4220] Dubuc, M., Nadeau, T., and J. Lang, "Traffic Engineering
Link Management Information Base", RFC 4220,
November 2005.
[RFC4377] Nadeau, T., Morrow, M., Swallow, G., Allan, D., and S.
Matsushima, "Operations and Management (OAM) Requirements
for Multi-Protocol Label Switched (MPLS) Networks",
RFC 4377, February 2006.
[RFC4444] Parker, J., Ed., "Management Information Base for
Intermediate System to Intermediate System (IS-IS)",
RFC 4444, April 2006.
[RFC4802] Nadeau, T., Ed., and A. Farrel, Ed., "Generalized
Multiprotocol Label Switching (GMPLS) Traffic Engineering
Management Information Base", RFC 4802, February 2007.
[RFC4803] Nadeau, T., Ed., and A. Farrel, Ed., "Generalized
Multiprotocol Label Switching (GMPLS) Label Switching
Router (LSR) Management Information Base", RFC 4803,
February 2007.
[RFC5305] Li, T. and H. Smit, "IS-IS Extensions for Traffic
Engineering", RFC 5305, October 2008.
[RFC5307] Kompella, K., Ed., and Y. Rekhter, Ed., "IS-IS Extensions
in Support of Generalized Multi-Protocol Label Switching
(GMPLS)", RFC 5307, October 2008.
[RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an
IANA Considerations Section in RFCs", BCP 26, RFC 5226,
May 2008.
Miyazawa, et al. Standards Track [Page 38]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
[RFC5591] Harrington, D. and W. Hardaker, "Transport Security Model
for the Simple Network Management Protocol (SNMP)",
RFC 5591, June 2009.
[RFC5592] Harrington, D., Salowey, J., and W. Hardaker, "Secure
Shell Transport Model for the Simple Network Management
Protocol (SNMP)", RFC 5592, June 2009.
[RFC6353] Hardaker, W., "Transport Layer Security (TLS) Transport
Model for the Simple Network Management Protocol (SNMP)",
RFC 6353, July 2011.
[ISO10589] ISO 10589, "Intermediate System to Intermediate System
intra-domain routeing information exchange protocol for
use in conjunction with the protocol for providing the
connectionless-mode network service (ISO 8473)",
ISO/IEC 10589:2002.
11. Acknowledgments
The authors wish to acknowledge and thank the following individuals
for their valuable comments to this document: Ken Nagami, Shuichi
Okamoto, Adrian Farrel, Diego Caviglia, and Acee Lindem.
Miyazawa, et al. Standards Track [Page 39]
RFC 6825 TED MIB for MPLS-TE/GMPLS January 2013
Authors' Addresses
Masanori Miyazawa
KDDI R&D Laboratories, Inc.
2-1-15 Ohara Fujimino
Saitama, 356-8502
Japan
EMail: ma-miyazawa@kddilabs.jp
Tomohiro Otani
KDDI Corporation
KDDI Bldg,
2-3-2, Nishishinjuku, Shinjuku-ku
Tokyo, 163-8003
Japan
EMail: Tm-otani@kddi.com
Kenji Kumaki
KDDI Corporation
Garden Air Tower
Iidabashi, Chyoda-ku
Tokyo, 102-8460
Japan
EMail: ke-kumaki@kddi.com
Thomas D. Nadeau
Juniper Networks
10 Technology Park Drive
Westford, MA
USA
EMail: tnadeau@juniper.net
Miyazawa, et al. Standards Track [Page 40]
ERRATA
